alexcwu1121/hammerhead-platform-controllerTo build: 1. Install Podman >4.x 2. Install VSCode 3. Install VSCode Dev Containers extension 4. In Dev Containers settings, set the following: - Docker Path: podman - Docker Compose Path: podman-compose - Docker…
Hammerhead 0.0.1 is an open-source printed circuit board by alexcwu1121, from the alexcwu1121/hammerhead-platform-controller repository on GitHub. It is a 4-layer board of 67.6 × 29.5 mm with 113 parts on 87 nets, routed with 602 tracks and 306 vias.
It is built around the STM32F103C8T6, BMI270 and RT9193-33GB. Its parts include 41 capacitors, 25 resistors, 10 ICs, 6 connectors and 3 inductors. It belongs with the STM32 boards of this library.
To build:
podmanpodman-compose/run/podman/podman.sockTo quick-run pre-commit, builds, tests:
podman-compose run --build pre-commit
podman-compose run --build build-debug
podman-compose run --build build-release
CAN ID claims:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 10k, 0402 | Resistor_SMD:R_0402_1005Metric | R1, R3, R4, R5, R9, R13, R15, R17, R19, R21, R24 |
| 9 | 0.1uF, 0402, 16V | Capacitor_SMD:C_0402_1005Metric | C1, C2, C4, C5, C6, C9, C27, C39, C40 |
| 7 | 0.1uF, 0402, 25V | Capacitor_SMD:C_0402_1005Metric | C13, C14, C18, C19, C23, C32, C37 |
| 6 | 47uF, 1206, 25V | Capacitor_SMD:C_1206_3216Metric | C10, C11, C12, C15, C16, C17 |
| 5 | 100k, 0402 | Resistor_SMD:R_0402_1005Metric | R6, R7, R10, R11, R14 |
| 5 | 1M, 0402 | Resistor_SMD:R_0402_1005Metric | R_FB_A_2, R_FB_A_3, R18, R22, R25 |
| 4 | 1uF, 0402, 16V | Capacitor_SMD:C_0402_1005Metric | C8, C22, C31, C36 |
| 3 | 100, 0402 | Resistor_SMD:R_0402_1005Metric | R16, R20, R23 |
| 3 | 10uF, 1210, 50V | Capacitor_SMD:C_1210_3225Metric | C20, C29, C34 |
| 3 | 1uF, 0402, 50V | Capacitor_SMD:C_0402_1005Metric | C21, C30, C35 |
| 3 | 4.7uH, 0420CDMCCDS-4R7MC | 0420CDMCCDS-4R7MC:0420CDMCCDS-4R7MC | L1, L2, L3 |
| 3 | 47uF, 1210, 25V | Capacitor_SMD:C_1210_3225Metric | C24, C33, C38 |
| 3 | L6983CQTR | L6983C33QTR:QFN_33QTR_STM | U5, U7, U8 |
| 2 | 110k, 0402 | Resistor_SMD:R_0402_1005Metric | R_EN_A_2, R_EN_A_3 |
| 2 | 12k, 0402 | Resistor_SMD:R_0402_1005Metric | R_EN_B_2, R_EN_B_3 |
| 2 | 12pF, 0603, 16V | Capacitor_SMD:C_0603_1608Metric | C3, C7 |
| 2 | 1k, 0603 | Resistor_SMD:R_0603_1608Metric | R2, R26 |
| 2 | 68k, 0402 | Resistor_SMD:R_0402_1005Metric | R8, R12 |
| 2 | 75k, 0402 | Resistor_SMD:R_0402_1005Metric | R_FB_B_2, R_FB_B_3 |
| 2 | MAX14870ETC_T | MAX14870ETC_T:21-0664B_MXM | U3, U4 |
| 1 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C41 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R36 |
| 1 | 10uF, 0603, 16V | Capacitor_SMD:C_0603_1608Metric | C28 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric | R38 |
| 1 | 16 MHz | TXC_AV16000004:TXC_AV16000004 | Y1 |
| 1 | 1uF, 0603, 16V | Capacitor_SMD:C_0603_1608Metric | C25 |
| 1 | 200k, 0402 | Resistor_SMD:R_0402_1005Metric | R_EN_A_1 |
| 1 | 22nF, 0402, 16V | Capacitor_SMD:C_0402_1005Metric | C26 |
| 1 | 25LC256-I_SN | 25LC256-I/SN:SOIC8-N_MC_MCH | U2 |
| 1 | 430k, 0402 | Resistor_SMD:R_0402_1005Metric | R_FB_A_1 |
| 1 | 436500427 | 436500427:CONN_SD-43650-010_04_MOL | J7 |
| 1 | 50k, 0402 | Resistor_SMD:R_0402_1005Metric | R_EN_B_1 |
| 1 | 82k, 0402 | Resistor_SMD:R_0402_1005Metric | R_FB_B_1 |
| 1 | BATTERY_CONN | 1985823:PHOENIX_1985823 | J1 |
| 1 | BMI270 | BMI270:BMI270_BOS | U9 |
| 1 | DEBUG | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | JTAG | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | LED, 0603, BLUE | Diode_SMD:D_0603_1608Metric | D1 |
| 1 | LED, 0603, RED | Diode_SMD:D_0603_1608Metric | D2 |
| 1 | M1_CONN | 1985823:PHOENIX_1985823 | J2 |
| 1 | M2_CONN | 1985823:PHOENIX_1985823 | J3 |
| 1 | RT9193-33GB | RT9193-33GB:SOT-23-5_RIT | U6 |
| 1 | STM32F103C8T6 | STM32F103C8T6:LQFP48_STM | U1 |
| 1 | TCAN337DR | TCAN337DR:D0008A_N | U22 |
The 103 most common of 113 parts.
alexcwu1121/hammerhead-platform-controller
To build: 1. Install Podman >4.x 2. Install VSCode 3. Install VSCode Dev Containers extension 4. In Dev Containers settings, set the following: - Docker Path: podman - Docker Compose Path: podman-compose - Docker…
alexcwu1121/hammerhead-turret-controller
To build: 1. Install Podman >4.x 2. Install VSCode 3. Install VSCode Dev Containers extension 4. In Dev Containers settings, set the following: - Docker Path: podman - Docker Compose Path: podman-compose - Docker…
YeetTheAnson/RFly-One
Offline general aviation proximity awareness system with support for ADS-B, FLARM AIR V7, OGNTP and FANET+
dilshan/star-pointer
DIY virtual electronic finderscope for astronomical telescopes
muhammedsaifudeen/High_Power_DC_Load_Control_Unit
Designed and developed a 2 Layer PCB which has both high power component and low component .Using certain isolation and methods i have successfully design the control unit using stm32f103 which can drive load upto 2000W
prifan90/Design-PCB-Digitalisasi-HeatExchanger
Make PCB design for digitalization of heat exchanger tool with ic stm32 (embedded system)
It measures 67.6 × 29.5 mm and has 4 copper layers, 1.6 mm thick.
113 parts, built around the STM32F103C8T6, BMI270 and RT9193-33GB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the alexcwu1121/hammerhead-platform-controller repository on GitHub, at the commit this page was made from: the board is kicad/hammerhead_0.0.1/hammerhead_0.0.1.kicad_pcb and its schematic kicad/hammerhead_0.0.1/HHDMC MCU.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask alexcwu1121 before reusing the design.