Skip to the content
2 layers213.2 × 120.4 mmWin split right, the printed circuit board in 3D

Win split right

alexcamlo/winsplit14

Inspired by the Boardrun Bizarre and Red herring. I wanted to be able to use a normal keyset, so no full ortho, but split.

Size
213.2 × 120.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
174
Nets
116
Pads
741
Tracks, vias
0, 0
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
16 Jan 2024
Updated
18 Dec 2024

Overview

Win split right is an open-source printed circuit board by alexcamlo, from the alexcamlo/winsplit repository on GitHub. It is a 2-layer board of 213.2 × 120.4 mm with 174 parts on 116 nets.

It is built around the 74AHCT1G125SE and SRV05-4. Its parts include 78 diodes, 40 capacitors, 2 ICs, 2 switches and 1 resistor. It belongs with the RP2040 and AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

Winsplit

Inspired by the Boardrun Bizarre and Red herring. I wanted to be able to use a normal keyset, so no full ortho, but split.

Keyboard

Disclaimer

This is my first designed keyboard from the grounds up. I'm not responsible for any damage caused by using this keyboard or any production of this keyboard that doesn't work.

Bill of materials

To be bought separately:

Diodes, capacitors, resistors and other small parts are to be soldered directly by JLCPCB. References in KiCad files.

TODO

  • Rotate 180º right-side OLED connector. Right now is not usable.
  • Rotary encoder. As of now, it either works as a button when a normal switch is installed or as an encoder without button when the HS Skyloong encoder is installed.
  • Make screw holes in PCB 4mm instead of 2.2mm. So they are passthrougth and bottom plate can be directly screwed to top plate, like lily58 or Corne keyboards.

Notes

  • Function keys (Right of B and left of N) are hard to reach.

Parts

174
QtyValueFootprintReferences
40100nFCapacitor_SMD:C_0402_1005MetricC1, C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C100 +24
39Diodewinkeebs:Diode_SOD-123D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +23
33MX_SW_HSwinkeebs:SW_MX_HS_CPG151101S11_1uMX1, MX2, MX10, MX11, MX12, MX13, MX14, MX15, MX16, MX17, MX18, MX19, MX20, MX21, MX22, MX25 +17
24MX_SK6812MINI-EPCM_marbastlib-mx:LED_MX_6028R-ROTLED1, LED2, LED3, LED17, LED18, LED19, LED20, LED21, LED22, LED23, LED24, LED32, LED33, LED34, LED35, LED36 +8
15MX_SK6812MINI-EPCM_marbastlib-mx:LED_MX_6028RLED9, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED25, LED26, LED27, LED28, LED29, LED30, LED31
8MountingHole_Padwinkeebs:HOLE_M2H1, H2, H3, H4, H5, H6, H7, H8
4MX_SW_HSwinkeebs:SW_MX_HS_CPG151101S11_1.25uMX23, MX34, MX35, MX36
2MX_SW_HSwinkeebs:SW_MX_HS_CPG151101S11_1.5uMX8, MX24
2MX_stabPCM_marbastlib-mx:STAB_MX_P_2.25uS23, S33
14.7KResistor_SMD:R_0805_2012MetricR3
174AHCT1G125Package_TO_SOT_SMD:SOT-23-5U2
1Conn_01x04_SocketConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1
1RP2040_ProMicrowinkeebs:RP2040_ProMicro_USBdnU1
1SRV05-4PCM_marbastlib-various:SOT-23-6-routableESD1
1SwitchButton_Switch_SMD:SW_SPST_B3U-1000PReset1
1TRRSScottoKeebs_Components:TRRS_PJ-320ATRRS1

More from alexcamlo/winsplit

2
  • 2 layers426.4 × 120.4 mmWin split left, the printed circuit board in 3D

    Win split left

    alexcamlo/winsplit

    Inspired by the Boardrun Bizarre and Red herring. I wanted to be able to use a normal keyset, so no full ortho, but split.

    331 parts14
  • 2 layers213.2 × 120.4 mmWin split left, the printed circuit board in 3D

    Win split left

    alexcamlo/winsplit

    Inspired by the Boardrun Bizarre and Red herring. I wanted to be able to use a normal keyset, so no full ortho, but split.

    156 parts14

Similar boards

  • 2 layersTopBoard, the printed circuit board in 3D

    TopBoard

    Libre-Talk/Wave

    Smart Speaker satellite

    184 parts22
  • 2 layers344.7 × 123.6 mmFuyu, the printed circuit board in 3D

    Fuyu

    JulianDomingo/pcbs

    Public PCB files for my keyboard projects!

    331 parts1MIT
  • 2 layers158.8 × 100.2 mmChocobanan rev.1, the printed circuit board in 3D

    Chocobanan rev.1

    leonrat/Chocobanan

    An alice-like 40% split keyboard

    108 parts1
  • 4 layers98 × 100 mmEsp32s3-can sd logger, the printed circuit board in 3D

    Esp32s3-can sd logger

    MrBlahhhh/esp32-shield-can1-can2-kdcan-analogin-sdcard

    A carrier board an ESP32-S3-DevKitC-1 plugs into, turning it into a vehicle data logger. The dev board brings the MCU and its power; this board brings everything that has to touch a car.

    164 parts1
  • 2 layers80.3 × 56 mmTachtalk pcb, the printed circuit board in 3D

    Tachtalk pcb

    docwilco/tachtalk-pcb

    42 parts
  • 2 layers270 × 100 mmXplodePCB, the printed circuit board in 3D

    XplodePCB

    LeeZard79/XplodePCB

    194 parts
  • 4 layers84 × 100 mmEsp32s3-can sd logger, the printed circuit board in 3D

    Esp32s3-can sd logger

    MrBlahhhh/esp32-autosport

    A data logger you wire straight into a race car: 12 V and CAN come in on one 4-pin plug, sensor readings and CAN traffic get written to a microSD card.

    206 parts
  • 2 layers284.7 × 94.2 mmWada pcb 60, the printed circuit board in 3D

    Wada pcb 60

    ttran134/project_wada

    60% JIS like layout keyboard with USB hub

    249 parts

Questions

How big is the Win split right PCB?

It measures 213.2 × 120.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Win split right use?

174 parts, built around the 74AHCT1G125SE and SRV05-4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Win split right KiCad files?

From the alexcamlo/winsplit repository on GitHub, at the commit this page was made from: the board is pcb/right/Win-split-right-backups/Win-split-right-2024-04-04_111250/Win-split-right-backups/Win-split-right-2024-03-13_131727/Win-split-right.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Win split right design in my own project?

Its repository states no licence, so its author keeps all rights: ask alexcamlo before reusing the design.