

Esp32-wroom table lights
KiCAD PBC projects
- Size
- 144 × 0.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 135
- Nets
- 34
- Pads
- 451
- Tracks, vias
- 393, 83
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 18 Jan 2024
- Updated
- 10 Apr 2026
Overview
Esp32-wroom table lights is an open-source printed circuit board by alexandrebobkov, from the alexandrebobkov/KiCAD-Projects repository on GitHub, published under the MIT licence. It is a 2-layer board of 144 × 0.1 mm with 135 parts on 34 nets, routed with 393 tracks and 83 vias.
It is built around the AMS1117-5V. Its parts include 46 resistors, 46 diodes, 14 capacitors, 6 ICs and 4 connectors. It belongs with the ESP32 and RISC-V boards of this library.
Main components
1README
README.mdKiCAD-Projects
KiCAD PBC projects
ESP32-C3 DevBoard and Breadboard Power Supply Combo
ESP32-WROOM-32D Module Adapter
[!CAUTION] Do Not Use pins 17, 18, 19, 20, 21 & 22
Power pins: pin #2 +3V3, pins #15 and 38: GND
Parts
135| Qty | Value | Footprint | References |
|---|---|---|---|
| 43 | 10R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1 +27 |
| 40 | LED-5050 | Alexander Footprint Library:LED_5050-6 | D3, D3, D3, D3, D3, D3, D3, D3, D3, D3, D3, D3, D3, D3, D3, D3 +24 |
| 8 | MountingHole_M3 | MountingHole:MountingHole_3.2mm_M3 | H1, H1, H1, H1, H1, H2, H2, H2 |
| 6 | 1uF | Capacitor_SMD:CP_Elec_3x5.3 | C1, C2, C3, C8, C9, C10 |
| 4 | 0.1uF | Capacitor_SMD:CP_Elec_3x5.3 | C5, C7, C13, C14 |
| 4 | 10uF | Capacitor_SMD:CP_Elec_3x5.3 | C4, C6, C11, C12 |
| 2 | 3V3 | TestPoint:TestPoint_Pad_D1.5mm | TP3, TP7 |
| 2 | 5050 | LED_SMD:LED_1210_3225Metric_Pad1.42x2.65mm_HandSolder | D2, D6 |
| 2 | 5V | TestPoint:TestPoint_Pad_D1.5mm | TP4, TP8 |
| 2 | AMS1117-3V3 | Alexander Footprint Library:AMS1117 SOT-223 | U2, U5 |
| 2 | AMS1117-5V | Alexander Footprint Library:AMS1117 SOT-223 | U3, U6 |
| 2 | D | Diode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D7 |
| 2 | ESP32-C3 SuperMini | Alexander Footprint Library:ESP32-C3_SuperMini | U1, U4 |
| 2 | GND | TestPoint:TestPoint_Pad_D1.5mm | TP2, TP6 |
| 2 | I2C | Alexander Footprint Library:Conn_I2C | J2, J4 |
| 2 | PWR | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J1, J3 |
| 2 | R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6, R8 |
| 2 | VIN | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP5 |
| 2 | ~ | Alexander Footprint Library:Circle-44R | BRD1, BRD2 |
| 1 | A1050 | OptoDevice:R_LDR_D6.4mm_P3.4mm_Vertical | R7 |
| 1 | LED-5050 | Alexander Footprint Library:PinSocket_1x02_P2.54 | D4 |
| 1 | LED_8mm | LED_THT:LED_D8.0mm | D8 |
| 1 | NPN | Package_TO_SOT_THT:TO-92L_Inline_Wide | Q1 |
More from alexandrebobkov/KiCAD-Projects
12- 2 layers100 × 100 mm

- 2 layers100 × 100 mm

- 2 layers65.3 × 80.9 mm

- 2 layers44 × 0.1 mm

- 2 layers341.1 × 164.7 mm

- 2 layers65.2 × 81 mm

- 2 layers190.6 × 87 mm

- 2 layers65 × 40 mm

- 2 layers99.1 × 96.5 mm

- 2 layers52.1 × 40.6 mm

- 2 layers95 × 78 mm

- 2 layers50.8 × 39.4 mm

Similar boards
- 2 layers100 × 100 mm

JBT01
jbteja/tj01-ms51-heater-controller
A heater control system featuring deterministic operation, safety auto-cutoff, predefined timer modes, and temperature measurement using a K-type thermocouple.
79 parts1 - 4 layers57 × 57 mm

- 4 layers90.5 × 68.3 mm

- 2 layers231 × 175.3 mm

- 4 layers68.8 × 53.6 mm

Easyduino Atmega
Hanqaqa/Easyduino
Easily dive into different PCB KiCad designs of the most popular microcontroller devboards
38 parts755CERN-OHL-P-2.0 - 2 layers68.8 × 53.3 mm

- 2 layers191 × 85 mm

Sub panel
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
135 parts3kApache-2.0 - 2 layers95.3 × 161.9 mm

Questions
How big is the Esp32-wroom table lights PCB?
It measures 144 × 0.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp32-wroom table lights use?
135 parts, built around the AMS1117-5V. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp32-wroom table lights KiCad files?
From the alexandrebobkov/KiCAD-Projects repository on GitHub, at the commit this page was made from: the board is esp32-wroom-table-lights/esp32-wroom-table-lights/esp32-wroom-table-lights.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp32-wroom table lights design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).