

RCcar
- Size
- 52 × 56 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 46
- Pads
- 162
- Tracks, vias
- 304, 24
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 23 Jul 2023
- Updated
- 23 Jul 2023
Overview
RCcar is an open-source printed circuit board by alexander-aas, from the alexander-aas/rc-car repository on GitHub. It is a 2-layer board of 52 × 56 mm with 47 parts on 46 nets, routed with 304 tracks and 24 vias.
It is built around the ATMEGA328-PU and TC1262-5.0VAB. Its parts include 19 resistors, 8 capacitors, 8 connectors, 3 ICs and 3 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATMEGA328-PU
PDIP-28-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH PDIP-28 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)TC1262-5.0VAB
TO-220-3-40℃~+125℃ 1 130uA 500mA 5V 64dB@(1kHz) 650mV@(500mA) 6V Fixed Positive TO-220-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdRC Car Project
This repository contains all files for the controller boards I designed for a RC car I am building myself.
Version 1
The first version of the board uses a AtMega 328 MCU for controlling the motor driver, lights, and steering of the car. It is connected to an external ESP 8266 chip for enabling wireless communication.
Version 2
The second version is currently in development. It replaces the AtMega 328 chip with an on-board ESP32 in order to reduce the overall footprint of the chip. It also features a USB-C connector to facilitate flashing and debugging the controller without having to rely on additional debugging equipment.
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 150 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R4, R5, R10 |
| 5 | 100 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6, R7, R8, R9, R11 |
| 3 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R12, R13, R14 |
| 3 | NPN | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3 |
| 3 | R_Small | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R17, R18, R19 |
| 2 | 0.1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C4 |
| 2 | 1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 2 | 22pF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5, C6 |
| 2 | Screw_Terminal_01x02 | Custom_Components:CTB0700-2 | J5, J7 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C8 |
| 1 | 16.000 | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | 200 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R15 |
| 1 | 22uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C9 |
| 1 | 470 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R16 |
| 1 | ATmega328-P | Package_DIP:DIP-28_W7.62mm | U2 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | Conn_01x07_Pin | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J6 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J9 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J1 |
| 1 | D_Schottky_Dual_CommonCathode_AKA | Package_TO_SOT_SMD:TO-252-2 | D4 |
| 1 | LT1084-ADJ | Package_TO_SOT_SMD:TO-252-2 | U4 |
| 1 | PWR_LED_1 | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | PWR_LED_2 | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D3 |
| 1 | SW_MEC_5E | Custom_Components:ElegooButton | SW2 |
| 1 | SW_SPDT_MSM | Custom_Components:1101M2S3CQE2 | SW3 |
| 1 | TC1262-50 | Package_TO_SOT_SMD:SOT-223 | U3 |
More from alexander-aas/rc-car
1- 2 layers22.9 × 55.9 mm

Similar boards
- 2 layers104.9 × 75.2 mm

- 2 layers228 × 98 mm

- 2 layers94.6 × 46.1 mm

- 2 layers50 × 50 mm

- 2 layers284.7 × 94.2 mm

Lumberjack
peej/lumberjack-keyboard
5x12 ortholinear through-hole component keyboard PCB for standard 60% cases
165 parts403MIT - 2 layers132.1 × 45.7 mm

IPoS
peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.
42 parts342 - 2 layers63.3 × 57.2 mm

- 2 layers285 × 117 mm

Questions
How big is the RCcar PCB?
It measures 52 × 56 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RCcar use?
47 parts, built around the ATMEGA328-PU and TC1262-5.0VAB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RCcar KiCad files?
From the alexander-aas/rc-car repository on GitHub, at the commit this page was made from: the board is v1/RCcar.kicad_pcb and its schematic v1/RCcar.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RCcar design in my own project?
Its repository states no licence, so its author keeps all rights: ask alexander-aas before reusing the design.