2 layers50 × 35 mm
2 layers48.7 × 61.6 mm
Ddr pcb
alex-ong/ddr_pcb1Uses screw terminals for wires and sip sockets for resistors to make everything tool-less once soldered.
- Size
- 48.7 × 61.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 15
- Pads
- 68
- Tracks, vias
- 175, 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 12 Nov 2021
- Updated
- 23 Apr 2022
Overview
Ddr pcb is an open-source printed circuit board by alex-ong, from the alex-ong/ddr_pcb repository on GitHub. It is a 2-layer board of 48.7 × 61.6 mm with 17 parts on 15 nets, routed with 175 tracks and 6 vias.
Its parts include 5 connectors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
readme.mdDDR FSR PCB
A simple pcb that fits into a smaller footprint than a half-sized breadboard. Measurements are 49mm x 62mm
Uses screw terminals for wires and sip sockets for resistors to make everything tool-less once soldered.
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | R_Small | ddr_pcb:R_Axial_DDRPAD_L3.6mm_D1.6mm_P7.62mm_Horizontal | 220Ω, A0, A1, A2, A3, A6, A7, A8, A9, A10 |
| 4 | Screw_Terminal_01x04 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-4-2.54_1x04_P2.54mm_Horizontal | J1, J2, J3, J5 |
| 1 | CP | Diode_THT:D_DO-34_SOD68_P10.16mm_Horizontal | LED_CAP |
| 1 | ProMicro | promicro:ProMicro | U1 |
| 1 | Screw_Terminal_01x06 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-6-2.54_1x06_P2.54mm_Horizontal | J4 |
Similar boards
- 2 layers139.7 × 62.2 mm
- 2 layers29.2 × 55.9 mm
Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
17 parts1kGPL-3.0 - 2 layers24.5 × 36.5 mm
- 2 layers56.3 × 55.7 mm
StarNecklace
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
17 parts915 - 2 layers25 × 25 mm
SmallEncoder
DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…
17 parts498MIT - 2 layers38.9 × 16.1 mm
- 2 layers36 × 51 mm
Questions
How big is the Ddr pcb PCB?
It measures 48.7 × 61.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ddr pcb use?
17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ddr pcb KiCad files?
From the alex-ong/ddr_pcb repository on GitHub, at the commit this page was made from: the board is ddr_pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ddr pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask alex-ong before reusing the design.