2 layers18.5 × 26 mm
24g2usb rp2350zero
joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.
4 parts1.7kApache-2.0
2 layers
A basic python daemon for raspberry pi to check an host is down and perform an action to reset the host
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 4
- Nets
- 10
- Pads
- 16
- Tracks, vias
- 37, 0
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 11 Oct 2017
- Updated
- 25 May 2019
Overview
Pro is an open-source printed circuit board by aleskandro, from the aleskandro/piResetHost repository on GitHub. It is a 2-layer board with 4 parts on 10 nets, routed with 37 tracks and 0 vias.
README
README.mdpiResetHost
A basic python daemon for raspberry pi to check an host is down and perform an action to reset the host
It runs on gunicorn and offers a REST API to perform a manual reset.
A checker thread is spawned to ping every 30 seconds the host and perform the reset if it is down.
WARNING: the /reset get request is not secured: it is available to anyone that could reach the server.
Dependencies:
- python
- gunicorn
- falcon
- python-gpio for Raspberry pi
Tested on TinyCore Linux for RaspberryPi 3.
To Run
gunicorn -b 0.0.0.0:8080 main:api --reload
License
This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/.
Parts
4| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Batt. | Connect:bornier3 | C2 |
| 1 | FinderW30.22.7.005.0010 | Relays_ThroughHole:Relay_DPDT_Omron_G5V-2 | RL1 |
| 1 | RPi | Connect:bornier3 | C1 |
| 1 | Router | Connect:bornier2 | C3 |
Questions
What parts does the Pro use?
4 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pro KiCad files?
From the aleskandro/piResetHost repository on GitHub, at the commit this page was made from: the board is kicad/pro.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pro design in my own project?
Its repository states no licence, so its author keeps all rights: ask aleskandro before reusing the design.
Similar boards
- 2 layers116 × 33 mm
- 2 layers19 × 18 mm
Daughter board
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
4 parts915 - 2 layers24.8 × 24.8 mm
Nrf24 breakout
tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!
4 parts803MIT - 2 layers26 × 20 mm
Cap chain
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
4 parts744MIT - 2 layers34.7 × 20 mm
XG Station Power MSI
osy/XG_Mobile_Station
Open source eGPU dock for ROG Ally and ROG Flow
4 parts712CC-BY-4.0 - 2 layers20.3 × 24.5 mm
Jack power input
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
4 parts546MIT - 2 layers35.1 × 92.1 mm
SDEX2M2 MicroSD Express to M.2 NVMe Adapter for Switch 2 WIP
NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2
4 parts542GPL-3.0