

- Size
- 31.8 × 16.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 19
- Pads
- 55
- Tracks, vias
- 89, 11
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 13 Oct 2021
- Updated
- 21 Aug 2025
Overview
Wakeup is an open-source printed circuit board by alekseibutiaev, from the alekseibutiaev/electronics repository on GitHub. It is a 2-layer board of 31.8 × 16.5 mm with 15 parts on 19 nets, routed with 89 tracks and 11 vias.
It is built around the 74HC00D and 74HC393D. Its parts include 4 capacitors, 3 resistors, 2 ICs, 1 diode and 1 connector.
Main components
274HC00D
SOP-14-40℃~+125℃ 1.5V、3.15V、4.2V 1.9V、3.7V、5.9V 100mV、400mV、400mV 2 2V~6V 4 40uA 5.2mA 5.2mA 500mV~1.8V 74HC Series 7ns@6V,50pF NAND Gate SOIC-14 Logic Gates ROHSNexperiaLogic Gates74HC393D
SOP-14-40℃~+125℃ 107MHz 12ns 2 2V~6V 4 Asynchronous Divide-by-2 Falling Edge SOIC-14 Counters, Dividers ROHSNexperiaCounters, Dividers
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | C | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4 |
| 4 | DEV1 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 3 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3 |
| 1 | 74HC00 | Package_SO:SO-14_3.9x8.65mm_P1.27mm | U1 |
| 1 | 74HC393 | Package_SO:SO-14_3.9x8.65mm_P1.27mm | U2 |
| 1 | Conn_01x03_Female | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J1 |
| 1 | D | Diode_SMD:D_MiniMELF | D1 |
More from alekseibutiaev/electronics
12- 2 layers213.1 × 129 mm

- 2 layers283.2 × 111.1 mm

- 2 layers101.6 × 50.8 mm

- 2 layers

- 2 layers80 × 45.7 mm

- 2 layers213.1 × 129 mm

- 2 layers70 × 57.5 mm

- 2 layers

- 2 layers57.1 × 17.8 mm

- 2 layers35 × 23 mm

- 2 layers81.3 × 35.6 mm

- 2 layers47.5 × 47.7 mm

Similar boards
- 2 layers208 × 115 mm

Z80SBC
profdc9/Z80SBC
This is a PCB layout by Daniel Marks of Grant Searle's 9 chip CP/M computer as obtained from
127 parts20 - 2 layers165 × 135 mm

- 4 layers56.5 × 216 mm

- 4 layers160 × 100 mm

Single board
PrinceYadav78/Single-Board-Computer
A single board computer which can run OS written in C
87 partsMIT - 2 layers259.7 × 80 mm

- 4 layers100 × 100 mm

MemBird - Woodcock
transistorfet/retroverse
A collection of VME-based hardware and software for modular computers
60 parts17 - 2 layers100 × 100 mm

Minimal vga
ddanila/8080-cosim
Reconstruction of the Soviet/Estonian Juku E5104 processor board as a physical PCB and a runnable digital model. Structural Verilog connectivity is checked against the machine-readable board model with LVS.
46 parts1 - 2 layers160 × 100 mm

Questions
How big is the Wakeup PCB?
It measures 31.8 × 16.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Wakeup use?
15 parts, built around the 74HC00D and 74HC393D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Wakeup KiCad files?
From the alekseibutiaev/electronics repository on GitHub, at the commit this page was made from: the board is wakeup/wakeup.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Wakeup design in my own project?
Its repository states no licence, so its author keeps all rights: ask alekseibutiaev before reusing the design.