Skip to the content
2 layers100 × 100 mmPlaca Final, the printed circuit board in 3D

Proyecto Sistemas Embebidos 2022-1

Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
36
Nets
57
Pads
136
Tracks, vias
181, 401
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
19 May 2022
Updated
30 Jun 2022

Overview

Placa Final is an open-source printed circuit board by alejandromz, from the alejandromz/AudioPlayer-ESP32 repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 100 mm with 36 parts on 57 nets, routed with 181 tracks and 401 vias.

It is built around the ESP32-WROOM-32, LM2596S-5.0 and TP4056. Its parts include 9 resistors, 9 ICs, 4 capacitors, 4 switches and 2 diodes. It belongs with the ESP32 boards of this library.

Main components

3

README

README.md

AudioPlayer-ESP32

Proyecto Sistemas Embebidos 2022-1. La documentación del proyecto se puede encontrar en el Wiki asociado a este repositorio. En la parte del código se pueden encontrar 3 carpetas: una con el desarrollo de la placa en Kikad, otra con el código de prueba de módulos individuales y la última con el código final del proyecto.

Parts

36
QtyValueFootprintReferences
4, , ,
4100nCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2, C3, C4
4SW_PushButton_Switch_THT:SW_PUSH_6mm_H5mmSW1, SW2, SW3, SW4
210kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2
2470Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3, R9
25.1kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR5, R7
251kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR4, R6
2LEDLED_THT:LED_D3.0mmD1, D2
11kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR8
1Battery_CellConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalBT1
1CircuitBreaker_1PButton_Switch_THT:SW_DIP_SPSTx01_Slide_9.78x4.72mm_W7.62mm_P2.54mmCB1
1ESP32-WROOM-32RF_Module:ESP32-WROOM-32U1
1HW-504Modulos:HW-504U4
1LM2596Modulos:LM2596U5
1MAX_98357AModulos:MAX98357aU8
1MicroSDCardAdapterModulos:MicroSDCardAdapterU3
1RS232Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalU2
1R_PotentiometerPotentiometer_THT:Potentiometer_Alps_RK09Y11_Single_HorizontalRV1
1SpeakerConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalLS1
1TP4056Modulos:Tp056U9
1XL6009E1Modulos:XL6009E1U6
1i2c_mcConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalU7

Similar boards

  • 2 layersSistemasolar, the printed circuit board in 3D

    Sistemasolar

    heyboiiiii/AgroNeckPower

    Power System for the "AgroNeck" device.

    28 parts1
  • 2 layers85.4 × 56.5 mmHardware 2, the printed circuit board in 3D

    Hardware 2

    lev-dec/mode_bike

    Design of a bike PCB

    77 parts
  • 2 layers167.1 × 181.2 mmTeam electrabuzz, the printed circuit board in 3D

    Team electrabuzz

    MayankBagad/Electabuzz_Unplugged

    Submission for Unplugged round 2 by Team Electabuzz

    11 parts
  • 2 layers140 × 105 mmFt150ts C, the printed circuit board in 3D

    Ft150ts C

    z-XOF-z/FT150TS

    Tablero digital + launcher para Android que funciona solo con el teléfono del manubrio y está listo para una tarjeta ESP32 en la moto.

    68 parts
  • 2 layers67 × 104 mmBreakout board, the printed circuit board in 3D

    Breakout board

    Mritunjay5511/ESP32-Multi-Motor-Controller-Board-

    Custom ESP32-WROOM-32 robotics controller PCB with onboard buck/LDO power regulation, auto-program circuit, and BTS7960/RMCS/relay/servo interfaces. Designed in KiCad.

    38 parts5MIT
  • 2 layers81.3 × 86.4 mmWater Dispenser, the printed circuit board in 3D

    Water Dispenser

    anadskman/Water-Dispenser

    A water dispenser that can dispense water mixed with flavouring like blackcurrent

    18 parts1
  • 2 layers33 × 128.5 mmEncoder, the printed circuit board in 3D

    Encoder

    cukier/LoraProgrammer

    Firmware ESP32 (ESP-IDF) para programar e configurar módulos de rádio LoRa, expondo a configuração através de um servidor HTTP em Wi-Fi (SoftAP/STA), acessível também via mDNS (http:// .local/).

    84 partsMIT

Questions

How big is the Placa Final PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Placa Final use?

36 parts, built around the ESP32-WROOM-32, LM2596S-5.0 and TP4056. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Placa Final KiCad files?

From the alejandromz/AudioPlayer-ESP32 repository on GitHub, at the commit this page was made from: the board is kikad/Placa-Final/Placa-Final.kicad_pcb and its schematic kikad/Placa-1/Placa-1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Placa Final design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).