
LoRa 1W Breakout
alegoldstein/NUSTARS
Payload PCB for Northwestern University's 2025-2026 IREC rocket

Payload PCB for Northwestern University's 2025-2026 IREC rocket
LoRa breakout is an open-source printed circuit board by alegoldstein, from the alegoldstein/NUSTARS repository on GitHub. It is a 4-layer board of 63.5 × 51.5 mm with 9 parts on 20 nets, routed with 111 tracks and 166 vias.
It is built around the S6B-PH-SM4-TB and S4B-PH-SM4-TB. Its parts include 3 connectors, 2 capacitors, 2 resistors and 1 IC. It belongs with the radio and wireless and interfaces and adapters boards of this library.
Payload PCB for Northwestern University's 2025-2026 IREC rocket
Objective: Integrate electronics to gather and transfer flight data in a compact payload.
Steps Taken:
Outcome: Compact payload with reliable electronics for data acquisition during and after launch.
PCB Schematic
PCB Routing
PCB Rendering
Final PCB was made to be a hat for the Raspberry Pi to be as compact as possible Raspberry Pi handled video collection and Teensy 4.1 on the PCB collected data from altimeter and monitored battery life
Initial PCB made to have each system work modularly for ease of debugging
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric | C3, C5 |
| 2 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | S6B-PH-SM4-TB | NUSTARS_Payload_FootprintLib:flat ph 1x6 | J3, J4 |
| 1 | S4B-PH-SM4-TB | NUSTARS_Payload_FootprintLib:1x4 sideways ph | J2 |
| 1 | ~ | NUSTARS_Payload_FootprintLib:LGA9_BMP585_BOS | U1 |
| 1 | ~ | NUSTARS_Payload_FootprintLib:LoRa_Breakout_Footprint | LoRa2 |

alegoldstein/NUSTARS
Payload PCB for Northwestern University's 2025-2026 IREC rocket

alegoldstein/NUSTARS
Payload PCB for Northwestern University's 2025-2026 IREC rocket

alegoldstein/NUSTARS
Payload PCB for Northwestern University's 2025-2026 IREC rocket

alegoldstein/NUSTARS
Payload PCB for Northwestern University's 2025-2026 IREC rocket

alegoldstein/NUSTARS
Payload PCB for Northwestern University's 2025-2026 IREC rocket

Yexall/CPE-450.Capstone
Fall 24 - Winter 25 Cal Poly Capstone project by Haas Hooligans. This projects aims to build a machine monitoring system for the Cal Poly IME department.


WheelchairSeniorDesign/PCBs
The PCB designs for the wheelchair for our senior design project


nichlock/open-linear-scale
Open-source capacitive linear encoder / DIY DRO scale: KiCad PCBs, STM32 firmware, and test data. Same principle as digital calipers.

SETIatHCRO/Front-Page
Documentation related to the Allen Telescope Array at the Hat Creek Radio Observatory Wiki Link Below

skullbox305/PCA9629A-I2C-Stepper-Motor-Controller
NXP PCA9629A I2C stepper motor controller breakout board designed in KiCAD

It measures 63.5 × 51.5 mm and has 4 copper layers, 1.6 mm thick.
9 parts, built around the S6B-PH-SM4-TB and S4B-PH-SM4-TB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the alegoldstein/NUSTARS repository on GitHub, at the commit this page was made from: the board is PCB/Payload/LoRa breakout/LoRa breakout.kicad_pcb and its schematic PCB/Payload/Battery_Sensor/Battery_Sensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask alegoldstein before reusing the design.