Skip to the content
2 layers438 × 160.5 mmBEAMal Rev1, the printed circuit board in 3D

Beampring PCB

Size
438 × 160.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
131
Nets
119
Pads
376
Tracks, vias
637, 0
Pours
2
Routed
Yes
KiCad
KiCad 7 (file 20230410)
Created
13 Sep 2022
Updated
18 Apr 2024

Overview

BEAMal Rev1 is an open-source printed circuit board by Alectardy98, from the Alectardy98/pcb_BEAMal_Rev1 repository on GitHub, published under the MIT licence. It is a 2-layer board of 438 × 160.5 mm with 131 parts on 119 nets, routed with 637 tracks and 0 vias.

README

README.md

BEAMAL Rev. 1

text
A Custom Replacment PCB and case, using the IBM 6580 Displaywriter System as a base
                                        

capture-2022-10-17T17_06_59 611Z capture-2022-10-17T17_06_51 711Z

All Supported Layouts can be seen HERE

xwhatsit/QMK atmega32u4 pcb for the IBM Model F XT and IBM Bigfoot

This version has NOT YET been tested, THIS IS A SMALL PRODUCTION OF 5 UNITS, NEVER TO BE SOLD AGAIN

  • The firmware can be found in the firmware folder
  • All files for production though JLCPCB can be found in the JLCPCB folder
  • This pcb requires an xwhatsit to function, see purdeaandrei's open source files
  • Note, even though this is a beamspring pcb, it will use a model F xWhatsit replacment controller
  • Test Points are currently on the pcb, when building make sure to cover the bottom test points with eletrical tape to prevent a short
  • The barrel Plate will need to be modified, A replacment barrel plate file will be provided with the custom case files

The PCB thickness should be 0.6mm or 0.08mm. This is thin enough to allow the board to flex into shape.

  • 0.8mm tested and working

Standard glossy soldermask is probably the best choice. JLCPCB has had issues with wear on their black soldermask before. They have changed the formula, but a standard green/red/blue/yellow/purple/white/etc. glossy solder mask is probaby the safest bet for keyswitch wear resistance. Higher wear resistance might also be achieved by coating the front of the capacitive pads in silkscreen, as silkscreen is an extra layer of epoxy. I am unsure how this will affect keyfeel or actuation, however.

For connecting the board to an xwhatsit or other controller, I would recommend 3M 8132/06 100, which has the correct pitch to connect this pcb to an xwhatsit

Capacitive pad footprints have been created spificly for this project, as the White whale beamspring has an off axis footprint aligment. In order to stay true to the origional desigen philosphy, that change has been made here also. Thank you to All mesurements have beeen take from an origonal IBM Displaywrighter system (BAE). The key matrix of the PCB is custom, made by myself, guided purdeaandrei.

Released without warranty, use at your own risk.
PRs & feedback welcome!

| Authors |

Alectardy98

| Special Thanks |

purdeaandrei - For many things, this project would not have happened without him.

Parts

131
QtyValueFootprintReferences
12MountingHolerandom-keyboard-parts:Generic-Mounthole_4.6mmH1, H2, H3, H4, H5, H6, H7, H8, H9, H10, H11, H12
1 B,5 (P11)lib_fp:SW_CAP_IBM_BSW_82
11,1 (F11)lib_fp:SW_CAP_IBM_BSW_11
11,2 (F9)lib_fp:SW_CAP_IBM_BSW_09
11,3 (F7)lib_fp:SW_CAP_IBM_BSW_07
11,4 (F5)lib_fp:SW_CAP_IBM_BSW_05
11,5 (F3)lib_fp:SW_CAP_IBM_BSW_03
11,6 (F4)lib_fp:SW_CAP_IBM_BSW_04
11,7 (F1)lib_fp:SW_CAP_IBM_BSW_01
11,8 (F2)lib_fp:SW_CAP_IBM_BSW_02
12,1 (F12)lib_fp:SW_CAP_IBM_BSW_12
12,2 (F10)lib_fp:SW_CAP_IBM_BSW_10
12,3 (CAPS)lib_fp:SW_CAP_IBM_BSW_42
12,4 (F8)lib_fp:SW_CAP_IBM_BSW_08
12,5 (F6)lib_fp:SW_CAP_IBM_BSW_06
12,6 (TAB)lib_fp:SW_CAP_IBM_BSW_28
12,7 (01)lib_fp:SW_CAP_IBM_BSW_14
12,8 (ESC)lib_fp:SW_CAP_IBM_BSW_13
13,1 (LCTL)lib_fp:SW_CAP_IBM_BSW_66
13,2 (Z)lib_fp:SW_CAP_IBM_BSW_55
13,3 (LSFT)lib_fp:SW_CAP_IBM_BSW_54
13,4 (S)lib_fp:SW_CAP_IBM_BSW_44
13,5 (A)lib_fp:SW_CAP_IBM_BSW_43
13,6 (W)lib_fp:SW_CAP_IBM_BSW_30
13,7 (Q)lib_fp:SW_CAP_IBM_BSW_29
13,8 (02)lib_fp:SW_CAP_IBM_BSW_15
14,1 (LALT)lib_fp:SW_CAP_IBM_BSW_67
14,2 (C)lib_fp:SW_CAP_IBM_BSW_57
14,3 (X)lib_fp:SW_CAP_IBM_BSW_56
14,4 (D)lib_fp:SW_CAP_IBM_BSW_45
14,5 (R)lib_fp:SW_CAP_IBM_BSW_32
14,6 (E)lib_fp:SW_CAP_IBM_BSW_31
14,7 (04)lib_fp:SW_CAP_IBM_BSW_17
14,8 (03)lib_fp:SW_CAP_IBM_BSW_16
15,1 (SPC)lib_fp:SW_CAP_IBM_BSW_68
15,2 (B)lib_fp:SW_CAP_IBM_BSW_59
15,3 (V)lib_fp:SW_CAP_IBM_BSW_58
15,4 (G)lib_fp:SW_CAP_IBM_BSW_47
15,5 (F)lib_fp:SW_CAP_IBM_BSW_46
15,6 (T)lib_fp:SW_CAP_IBM_BSW_33
15,7 (06)lib_fp:SW_CAP_IBM_BSW_19
15,8 (05)lib_fp:SW_CAP_IBM_BSW_18
16,1 (M)lib_fp:SW_CAP_IBM_BSW_61
16,2 (N)lib_fp:SW_CAP_IBM_BSW_60
16,3 (J)lib_fp:SW_CAP_IBM_BSW_49
16,4 (H)lib_fp:SW_CAP_IBM_BSW_48
16,5 (Y)lib_fp:SW_CAP_IBM_BSW_34
16,6 (U)lib_fp:SW_CAP_IBM_BSW_35
16,7 (08)lib_fp:SW_CAP_IBM_BSW_21
16,8 (07)lib_fp:SW_CAP_IBM_BSW_20
17,1 (DOT)lib_fp:SW_CAP_IBM_BSW_63
17,2 (COM)lib_fp:SW_CAP_IBM_BSW_62
17,3 (L)lib_fp:SW_CAP_IBM_BSW_51
17,4 (K)lib_fp:SW_CAP_IBM_BSW_50
17,5 (I)lib_fp:SW_CAP_IBM_BSW_36
17,6 (O)lib_fp:SW_CAP_IBM_BSW_37
17,7 (00)lib_fp:SW_CAP_IBM_BSW_23
17,8 (09)lib_fp:SW_CAP_IBM_BSW_22
18,1 (RALT)lib_fp:SW_CAP_IBM_BSW_69
18,2 (SLSH)lib_fp:SW_CAP_IBM_BSW_64
18,3 (QOTE)lib_fp:SW_CAP_IBM_BSW_53
18,4 (COLN)lib_fp:SW_CAP_IBM_BSW_52
18,5 (P)lib_fp:SW_CAP_IBM_BSW_38
18,6 (LBRC)lib_fp:SW_CAP_IBM_BSW_39
18,7 (PLUS)lib_fp:SW_CAP_IBM_BSW_25
18,8 (MINS)lib_fp:SW_CAP_IBM_BSW_24
19,2 (RCTL)lib_fp:SW_CAP_IBM_BSW_70
19,3 (RSFT)lib_fp:SW_CAP_IBM_BSW_65
19,4 (TEST)lib_fp:CAL_CAP_IBM_BSW_71
19,5 (ENT)lib_fp:SW_CAP_IBM_BSW_41
19,6 (RBRC)lib_fp:SW_CAP_IBM_BSW_40
19,7 (XTRA)lib_fp:SW_CAP_IBM_BSW_27
19,8 (BACK)lib_fp:SW_CAP_IBM_BSW_26
1A,1 (P22)lib_fp:SW_CAP_IBM_BSW_93
1A,2 (P21)lib_fp:SW_CAP_IBM_BSW_92
1A,3 (P18)lib_fp:SW_CAP_IBM_BSW_89
1A,4 (P17)lib_fp:SW_CAP_IBM_BSW_88
1A,5 (P13)lib_fp:SW_CAP_IBM_BSW_84
1A,6 (P09)lib_fp:SW_CAP_IBM_BSW_80
1A,7 (P05)lib_fp:SW_CAP_IBM_BSW_76

The 91 most common of 131 parts.

Similar boards

  • 2 layers139.1 × 107.7 mmLotus58 Glow 124, the printed circuit board in 3D

    Lotus58 Glow 124

    TweetyDaBird/Lotus-58-Classic

    A split ergo linear keyboard derived from the Lily58 family

    131 parts390
  • 2 layers103.2 × 74.1 mmUno, the printed circuit board in 3D

    Uno

    lukasloetkolben/OpenpilotHardware

    Welcome to the Openpilot Hardware Collection!

    131 parts95MIT
  • 2 layers97.2 × 58.9 mmDecentUSB2350, the printed circuit board in 3D

    DecentUSB2350

    bleroy/3d-junkyard

    Random 3D models

    131 parts69
  • 2 layers156.3 × 110.1 mmTakmak, the printed circuit board in 3D

    Takmak

    seniorsoftwarevlogger/takmak

    Takmak is the 65% orthogonal staggered columns split keyboard

    131 parts66
  • 2 layers101 × 68 mmLed panel 1, the printed circuit board in 3D

    Led panel 1

    tmarhguy/alu

    8-bit combinational ALU built from scratch with 3,488 CMOS transistors (KiCad + SPICE + Logisim + 1.24M tests

    131 parts48MIT
  • 2 layers96 × 56 mmBMC2, the printed circuit board in 3D

    BMC2

    craftit/Dogbot

    Robotic quadruped

    131 parts46
  • 2 layers70 × 151 mmDm50, the printed circuit board in 3D

    Dm50

    xavierbasc/dm50

    DM50 is a cheap, powerful, easy to build, open source hardware, and high precision calculator.

    131 parts38GPL-3.0

Questions

How big is the BEAMal Rev1 PCB?

It measures 438 × 160.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the BEAMal Rev1 use?

131 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the BEAMal Rev1 KiCad files?

From the Alectardy98/pcb_BEAMal_Rev1 repository on GitHub, at the commit this page was made from: the board is BEAMal_Rev1.kicad_pcb and its schematic BEAMal_Rev1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the BEAMal Rev1 design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).