
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

e-con のハブ基板
E con hub is an open-source printed circuit board by Akutagawa50, from the Akutagawa50/e-con_hub repository on GitHub, published under the MIT licence. It is a 2-layer board of 55 × 25 mm with 7 parts on 8 nets, routed with 55 tracks and 32 vias.
It is built around the XG4A-1031.
e-con のハブ基板
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | ~ | SamacSys_Parts:XN2D-1371 | J1, J2, J3, J4, J5, J6 |
| 1 | XG4A-1031 | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J7 |

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.



AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power


jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

It measures 55 × 25 mm and has 2 copper layers, 1.6 mm thick.
7 parts, built around the XG4A-1031. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Akutagawa50/e-con_hub repository on GitHub, at the commit this page was made from: the board is e-con_hub.kicad_pcb and its schematic e-con_hub.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).