

Actuator board
NT@B Project Fall 2025
- Size
- 84.3 × 67.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 38
- Pads
- 131
- Tracks, vias
- 252, 35
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 19 Oct 2025
- Updated
- 7 Dec 2025
Overview
Actuator board is an open-source printed circuit board by akshayshivkumar, from the akshayshivkumar/Electric-Feel repository on GitHub. It is a 2-layer board of 84.3 × 67.9 mm with 33 parts on 38 nets, routed with 252 tracks and 35 vias.
It is built around the STLQ015M33R. Its parts include 13 resistors, 10 capacitors, 8 ICs and 2 connectors. It belongs with the robots and motor control boards of this library.
Main components
1Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13 |
| 5 | 100n | Capacitor_SMD:C_0805_2012Metric | C2, C3, C4, C5, C6 |
| 5 | MCP4018T-103E/LTY | mcp4018:SC70-6_LT_MCH | U2, U4, U5, U6, U7 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1, C7, C10 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C8, C9 |
| 1 | 113991054 | 113991054:MODULE_113991054 | U1 |
| 1 | Conn_01x02_Socket | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J2 |
| 1 | Conn_01x10_Socket | Connector_PinSocket_1.00mm:PinSocket_1x10_P1.00mm_Vertical | J1 |
| 1 | STLQ015M33R | STLQ015M33R:SOT95P280X145-5N | U8 |
| 1 | TCA9548APWR | TCA9548APWR:SOP65P640X120-24N | U3 |
More from akshayshivkumar/Electric-Feel
3- 2 layers27.8 × 33.9 mm

- 2 layers11.7 × 21.4 mm

- 2 layers28.7 × 28.9 mm

Similar boards
- 2 layers53 × 22.5 mm

Breezedude transmitter
Breezedude/breezedudeWindSensor-pcb
PCB of Breezedude Wind Sensor Transmitter
59 parts1 - 2 layers95 × 73 mm

Ws1-basestation pcb
artichoked1/weatherStationHubBoard
This is a hub board that collects data from multiple sensors via RS485 and sends it to a server via LoRaWAN. d
51 parts - 2 layers65 × 30 mm

Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
33 parts1kGPL-3.0 - 2 layers127 × 96 mm

Amiga gfxcard
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
33 parts1k - 2 layers92.7 × 58.4 mm

Hacky holidays
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
33 parts915 - 2 layers240 × 120 mm

Quiver PDB 01
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
33 parts617CERN-OHL-S-2.0 - 2 layers75 × 26 mm

DIY detector
ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons
33 parts558BSD-2-Clause - 2 layers100 × 50 mm

Pixelix
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.
33 parts447MIT
Questions
How big is the Actuator board PCB?
It measures 84.3 × 67.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Actuator board use?
33 parts, built around the STLQ015M33R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Actuator board KiCad files?
From the akshayshivkumar/Electric-Feel repository on GitHub, at the commit this page was made from: the board is actuator_board [OLD]/actuator_board.kicad_pcb and its schematic ESP32C3 Mux/ESP32C3 Mux.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Actuator board design in my own project?
Its repository states no licence, so its author keeps all rights: ask akshayshivkumar before reusing the design.