Skip to the content
2 layers63.3 × 42 mmAnti Spark Switch, the printed circuit board in 3D

Design allows for a battery to be connected to a source without the usual spark in the connector, also provides a convenient on off ability.

Size
63.3 × 42 mm
Copper layers
2
Thickness
1.6 mm
Parts
29
Nets
7
Pads
81
Tracks, vias
371, 319
Pours
8
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
24 Oct 2024
Updated
24 Oct 2024

Overview

Anti Spark Switch is an open-source printed circuit board by akshattnj, from the akshattnj/antispark-switch-uav repository on GitHub. It is a 2-layer board of 63.3 × 42 mm with 29 parts on 7 nets, routed with 371 tracks and 319 vias.

Its parts include 7 connectors, 5 resistors, 3 transistors, 1 capacitor and 1 diode.

README

README.md

Anti Spark Switch

Personal improvements/changes to the vedder antispark switch

Design allows for a battery to be connected to a source without the usual spark in the connector, also provides a convenient on off ability. Improvements to the design include an upgraded, more robust fuse and fuse holder, an additional MOSFET for higher current handling as well as better distribution of power through the MOSFETs. There is also the option of adding an LED powered through the PCB, the LED is powered after the MOSFET switch

There are two versions currently, with fuse and without fuse. The without fuse version is located in its own branch, master contains the fuse version

schematic2 front2 back2

Parts

29
QtyValueFootprintReferences
12Kinetic_Footprints:via-0.45mm, , , , , , , , , , ,
4Pad_Connsparkparts:1PAD_8x7mmP1, P2, P5, P6
3IRFS7530sparkparts:D2PAK-7-GDSQ1, Q2, Q3
216.5KResistors_SMD:R_1206R4, R5
21MResistors_SMD:R_0603R1, R2
2Screw_TerminalGlobal_Parts:M5_Screw_Terminal_12_pinP3, P4
11KResistors_SMD:R_0603R3
11uFCapacitors_SMD:C_0603C1
1CONN_01X04Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_VerticalP7
1ZENERDiodes_SMD:D_SOD-123FD1

Similar boards

  • 2 layers52.3 × 10.5 mmStackLink, the printed circuit board in 3D

    StackLink

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    29 parts5.1kGPL-3.0
  • 2 layers56 × 20 mmHallEffectXY Endstop, the printed circuit board in 3D

    HallEffectXY Endstop

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    29 parts1.1kGPL-3.0
  • 2 layers50 × 23.2 mmAnalog, the printed circuit board in 3D

    Analog

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    29 parts1kGPL-3.0
  • 2 layers16.8 × 13.6 mmE Fidget Lite, the printed circuit board in 3D

    E Fidget Lite

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    29 parts915
  • 2 layers85 × 12.5 mmTERES PCB3-TOUCH BTN Rev.A, the printed circuit board in 3D

    TERES PCB3-TOUCH BTN Rev.A

    OLIMEX/DIY-LAPTOP

    Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop

    29 parts578Apache-2.0
  • 2 layers33.7 × 97.8 mmHAN ESP TSS721, the printed circuit board in 3D

    HAN ESP TSS721

    UtilitechAS/amsreader-firmware

    ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

    29 parts470
  • 2 layers80 × 55 mmGB CARTPP XC, the printed circuit board in 3D

    GB CARTPP XC

    Gekkio/gb-hardware

    Game Boy -related custom hardware by gekkio

    29 parts379CC-BY-4.0
  • 2 layers55 × 58 mmProto ads bee mcu board, the printed circuit board in 3D

    Proto ads bee mcu board

    PantsForBirds/adsbee

    Open Source Embedded ADS-B Receiver

    29 parts344GPL-3.0

Questions

How big is the Anti Spark Switch PCB?

It measures 63.3 × 42 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Anti Spark Switch use?

29 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Anti Spark Switch KiCad files?

From the akshattnj/antispark-switch-uav repository on GitHub, at the commit this page was made from: the board is Anti-Spark-Switch.kicad_pcb and its schematic Anti-Spark-Switch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Anti Spark Switch design in my own project?

Its repository states no licence, so its author keeps all rights: ask akshattnj before reusing the design.