
StackLink
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

Design allows for a battery to be connected to a source without the usual spark in the connector, also provides a convenient on off ability.
Anti Spark Switch is an open-source printed circuit board by akshattnj, from the akshattnj/antispark-switch-uav repository on GitHub. It is a 2-layer board of 63.3 × 42 mm with 29 parts on 7 nets, routed with 371 tracks and 319 vias.
Its parts include 7 connectors, 5 resistors, 3 transistors, 1 capacitor and 1 diode.
Personal improvements/changes to the vedder antispark switch
Design allows for a battery to be connected to a source without the usual spark in the connector, also provides a convenient on off ability. Improvements to the design include an upgraded, more robust fuse and fuse holder, an additional MOSFET for higher current handling as well as better distribution of power through the MOSFETs. There is also the option of adding an LED powered through the PCB, the LED is powered after the MOSFET switch
There are two versions currently, with fuse and without fuse. The without fuse version is located in its own branch, master contains the fuse version
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | Kinetic_Footprints:via-0.45mm | , , , , , , , , , , , | |
| 4 | Pad_Conn | sparkparts:1PAD_8x7mm | P1, P2, P5, P6 |
| 3 | IRFS7530 | sparkparts:D2PAK-7-GDS | Q1, Q2, Q3 |
| 2 | 16.5K | Resistors_SMD:R_1206 | R4, R5 |
| 2 | 1M | Resistors_SMD:R_0603 | R1, R2 |
| 2 | Screw_Terminal | Global_Parts:M5_Screw_Terminal_12_pin | P3, P4 |
| 1 | 1K | Resistors_SMD:R_0603 | R3 |
| 1 | 1uF | Capacitors_SMD:C_0603 | C1 |
| 1 | CONN_01X04 | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | P7 |
| 1 | ZENER | Diodes_SMD:D_SOD-123F | D1 |

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop

UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported


It measures 63.3 × 42 mm and has 2 copper layers, 1.6 mm thick.
29 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the akshattnj/antispark-switch-uav repository on GitHub, at the commit this page was made from: the board is Anti-Spark-Switch.kicad_pcb and its schematic Anti-Spark-Switch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask akshattnj before reusing the design.