2 layers37 × 19 mm
Passive rpi hub75-adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
2 parts4.4kGPL-2.0
2 layers
Quadcopter
AKrupaa/diy-quadcopter- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 2
- Nets
- 6
- Pads
- 8
- Tracks, vias
- 4, 0
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 3 Aug 2022
- Updated
- 15 Aug 2022
Overview
Quadcopter is an open-source printed circuit board by AKrupaa, from the AKrupaa/diy-quadcopter repository on GitHub. It is a 2-layer board with 2 parts on 6 nets, routed with 4 tracks and 0 vias.
It belongs with the robots and motor control boards of this library.
README
README.mdDIY quadcopter
Description
Design assumptions:
Controller
- Design hardware for receiving/transmitting data through air (LORA@EU863-870 868.1 - 868.8 Mhz)
- Write software
Drone
- Design hardware for receiving/transmitting data through air (LORA@EU863-870)
- Design hardware for drone having fun
- Write software
Parts
2| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Battery | Battery:BatteryHolder_Keystone_500 | BT1 |
| 1 | LMR51430XDDCR | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U1 |
Questions
What parts does the Quadcopter use?
2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Quadcopter KiCad files?
From the AKrupaa/diy-quadcopter repository on GitHub, at the commit this page was made from: the board is hardware/quadcopter/quadcopter.kicad_pcb and its schematic hardware/quadcopter/RF_converter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Quadcopter design in my own project?
Its repository states no licence, so its author keeps all rights: ask AKrupaa before reusing the design.
Similar boards
- 2 layers33 × 19 mm
- 2 layers
Diode template
adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing
2 parts547GPL-3.0 - 2 layers20.3 × 15.2 mm
L0 button
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
2 parts546MIT - 2 layers35.1 × 46.8 mm
SDEX2M2 Breakout Board
NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2
2 parts542GPL-3.0 - 2 layers59.3 × 36.6 mm
ExpansionBoardTemplate
BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350
2 parts459GPL-3.0 - 2 layers
Alpha.9mm.wire
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust
2 parts410 - 2 layers26.7 × 64 mm
