

Low mcu
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 29
- Pads
- 82
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 10 Oct 2026
- Updated
- 10 Oct 2026
Overview
Low mcu is an open-source printed circuit board by akram202, from the akram202/PCB_PROJECT_ repository on GitHub, published under the MIT licence. It is a 2-layer board with 17 parts on 29 nets.
It is built around the LORA-E5-HF. Its parts include 6 capacitors, 4 resistors, 4 connectors, 1 IC and 1 inductor.
Main components
1Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100nf | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C3 |
| 2 | 4.7K | Resistor_SMD:R_01005_0402Metric | R2, R3 |
| 2 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J4, J5 |
| 1 | 1.8nh | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | 100pf | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | 100uf | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B | C6 |
| 1 | 10K | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 10uf | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | Battery_Cell | Battery:Battery_Panasonic_CR2032-HFN_Horizontal_CircularHoles | BT1 |
| 1 | Conn_02x03_Odd_Even | Connector:Tag-Connect_TC2030-IDC-FP_2x03_P1.27mm_Vertical | J2 |
| 1 | Conn_Coaxial_Small | Connector_Coaxial:U.FL_Hirose_U.FL-R-SMT-1_Vertical | J1 |
| 1 | LoRa-E5 | LoRa-E5:LoRaE5 | IC1 |
| 1 | NC | Capacitor_SMD:C_0402_1005Metric | C5 |
More from akram202/PCB_PROJECT_
5- 2 layers

- 4 layers64.8 × 38.1 mm

- 2 layers58 × 39.1 mm

- 2 layers

- 2 layers34.3 × 32.4 mm

Similar boards
- 2 layers52 × 56.6 mm

- 2 layers115 × 80 mm

- 2 layers77 × 51.4 mm

MZ2023
makezurich/makezurich-badge-2023
Repo for the badge, hardware, software and examples.
91 parts4MIT - 2 layers25.4 × 45.7 mm

CE LoRa E5-Breakout Module
CoreElectronics/CE-Makerverse-LoRa-E5-Breakout-Module
This is the repo for the Makerverse™ LoRa-E5 Breakout.
34 parts2 - 4 layers80 × 60 mm

Tinynode
Stary2001/my-mesh-nodes
Here's all my mesh stuff. Everything here is licensed under CERN OHL-P.
67 parts2CERN-OHL-P-2.0 - 4 layers50 × 50 mm

- 2 layers33.3 × 54.5 mm

- 2 layers50 × 35 mm

LoRa E5 BME680
johflo/Seeed-LoRa-E5_BME680
Seeed Wio E5 LoraWan BME680 node without seperate MCU. Data from the BM680 is sent through the Helium LoraWan network to Cayenne to visualize the measured data
13 parts1
Questions
What parts does the Low mcu use?
17 parts, built around the LORA-E5-HF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Low mcu KiCad files?
From the akram202/PCB_PROJECT_ repository on GitHub, at the commit this page was made from: the board is LoRa-WLE MicroNode/low_mcu/_restore_backup_2026-07-21T18-40-05-453/low_mcu.kicad_pcb and its schematic DataStream-MP/esp32_24bit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Low mcu design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).