
Daylight Matchstick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

A macropad I designed as part of hackpad
Macropad is an open-source printed circuit board by AKKS1013, from the AKKS1013/Micropad repository on GitHub. It is a 2-layer board of 63.3 × 76.5 mm with 22 parts on 24 nets, routed with 93 tracks and 0 vias.
Its parts include 10 diodes, 10 switches, 1 IC and 1 connector. It belongs with the keyboards and input boards and the SAM D and SAM boards of this library.
This is a numpad-sized macropad I designed during Hackclub's Hackpad event. I probably spent about 10 hours on this project since I hadn't done pcb design or CAD before. I had the most trouble with the CAD and I'm hoping to make revisions to the case after the event is finished. I've made a basic QMK firmware for the Micropad with simple layers, allowing for use as a numpad and macropad but with some not so great key mappings that still need revisions.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10 |
| 9 | SW_Push_45deg | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9 |
| 1 | OLED_DISPLAY | seeed studio XIAO series local:SSD1306-0.91-OLED-4pin-128x32 | J1 |
| 1 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW10 |
| 1 | Seeed Studio XIAO SAMD21 | seeed studio XIAO series local:XIAO-Generic-Thruhole-14P-2.54-21X17.8MM | U1 |

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

abhishek-kakkar/BeagleLogic
A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.

Chrismettal/flipper-zero-backpacks
Backpack-style addon boards for the Flipper Zero!



CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
It measures 63.3 × 76.5 mm and has 2 copper layers, 1.6 mm thick.
22 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the AKKS1013/Micropad repository on GitHub, at the commit this page was made from: the board is pcb/macropad.kicad_pcb and its schematic pcb/macropad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask AKKS1013 before reusing the design.