Skip to the content
2 layers80 × 30 mmUSB C, the printed circuit board in 3D

Random odd guitar pedal design in kicad

Size
80 × 30 mm
Copper layers
2
Thickness
1.6 mm
Parts
40
Nets
26
Pads
109
Tracks, vias
212, 100
Pours
4
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
24 Apr 2025
Updated
11 Jul 2025

Overview

USB C is an open-source printed circuit board by AKJUS, from the AKJUS/1590A repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 80 × 30 mm with 40 parts on 26 nets, routed with 212 tracks and 100 vias.

Its parts include 13 capacitors, 8 resistors, 5 connectors, 3 ICs and 2 diodes. It belongs with the audio and music boards of this library.

README

README.md

Random guitar pedal board designs for 1590A enclosures

Electrical

These are not really all that useful, but having done guitar pedal board kit builds, I decided I should try to make something from scratch. I don't actually play guitar, but guitar pedal kits were fun to solder, and that then turned into "I want to actually understand what they do"..

[!NOTE] I'm not soldering wires together like some kind of animal --- thus PCBs designed in KiCad.

And not only don't I solder wires, I like surface-mount components. And not just because some newer stuff isn't even available in through-hole form any more.

Everything is designed to be "hand-soldered" --- although your definition of hand-soldering may differ from mine. The boards are double-sided, but surface mount components are only on one side, typically with the other side used only for connectors and the like.

I do these without a stencil. It's entirely doable, since I'm now limiting myself to fairly simple SOIC-8 and the like.

The design is split up into a "base board" and "effects boards", because the 1590A is pretty tight.

The base board should work with any of the effect boards, and is mainly just about the power rails and the input and output DC decoupling and signal buffering. And the stomp switch with true bypass etc.

The base board design is a traditional 9V power rail with a reference voltage at 4.5V (except using a 2426 rail splitter rather than some kind of traditional voltage divider hackery).

The effects boards are random "Linus is testing things he doesn't know anything about".

  • There's a traditional boost pedal with the traditional switch for clipping diodes. I think there's a law that you have to do an overdrive pedal with distortion. It also does some tone control with a Baxandall circuit.

    You can keep it as a clean boost, or have it clip either with the diodes or even just from hitting the voltage rails by boosting too much. With the opamps I have, hitting the voltage rails is a clean clip. But your choice of opamp will most definitely matter.

    It works fine, and acts like any number of traditional boost pedals.

  • There's a "rectifier" board that is really just an op-amp based precision rectifier of the signal in front, followed by a low-pass filter to get rid of most of the harsh high frequencies that the rectification causes at the signal "folding" point.

    The original signal is then blended back in. It's supposed to be kind of an octaver fuzz kind of thing, although with the filter is more of a random distortion effect.

    The sound is actually somewhat interesting.

  • There's a "tremolo" board with an LFO that drives a timed attenuation of the signal through a JFET to ground.

    The traditional analog tremolo boards that I did from kits tend to use a LED coupled with a LDR ("Vactrol"), and that always struck me as hacky. That said, having designed it with a JFET I understand why they used that vactrol.

    This is a pretty useless board from a sound standpoint, but my favorite one from a learning standpoint.

All of this has been tested and found somewhat working. And much of it has been have been simulated in kicad using ltspice. Signals have been looked at with a signal generator and a scope, and I've made random noises on an electric guitar to check that it works that way too.

Is any of it musical? Kind of. The boost pedal with clipping sounds perfectly fine. Real musicians have said "I could see myself using this", but it's also obviously about as non-unique as you can get.

The rectifier board sounds more unique and interesting now that the tone control has been made to be more extreme. It definitely adds some "character" to the output. I'm not sure you'd use it for music, but it's at least interesting.

The tremolo has a somewhat odd timing interface and the modulation is pretty abrupt. If you're looking for something smooth, this isn't it. But I like the board.

[!NOTE] Unlike the Gen1 boards, these are two-layer boards. Yes, it's slightly cheaper, but perhaps more importantly it means I get boards back a day earlier for testing.

That helped enormously with the tremolo in particular, which went from having a very annoying ticking sound ("It's a metronome too!") to being almost usable.

Mechanicals

Equally importantly: does the mechanical side work and will it actually fit in a 1590A enclosure?

Yes. Yes it does. Gen1 kind of did. Gen2 definitely fits. It's still tight, but I've worked on it. See the "Gen2-notes"

Unlike most enclosure builds, you also can not just drill 9.5mm holes in the sides for the audio jacks - you need to drill the sides all the way down so you can slide the board into the enclosure.

Components

Connectors and potentiometers are typically from Tayda Electronics, with most of the actual SMD components from Mouser:

  • Tayda A-6976: 1/4" thread lock panel mount mono jack CK635008

  • Tayda A-1848 etc: ALPHA 9mm PCB-mount potentiometers

  • Tayda A-4191: ALPHA 3PDT latching stomp switch.

  • Tayda A-3670 etc: 1M series mini toggle switches and the sub-mini 2M series for the side switch.

  • Wuerth 694106301002 9V DC power jack

  • SMD resistors are all 0805, and the values generally don't matter, but there's a couple of voltage references, so why would you ever get anything other than 1% stuff as a general kit?

  • Capacitors are 1206 for the power caps, with a Murata 0704 sized cap for the common 0.1uF ones, and 0805 sized for the small C0G signal capacitors.

  • Op-Amps are SOT-23-5 (single) or SOIC-8 (double). I use OPA165x for these, but they should all be mostly all pin-compatible.

    Note that if you use something like a traditional TL072, you will hit the rails and get horrible distortion if you do the boost thing. That may be what you want, but on the whole I'd suggest something more modern and more rail-to-rail'ish.

  • Hammond 1590A enclosure. There are drill patterns that work here: "Tayda drill patterns"

Parts

40
QtyValueFootprintReferences
822uFCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC2, C3, C6, C7, C8, C9, C10, C11
4Barrel_Jack_SwitchConnector_BarrelJack:BarrelJack_Wuerth_6941xx301002J2, J3, J4, J5
4MountingHoleMountingHole:MountingHole_3mmH1, H2, H3, H4
2100uFCapacitor_THT:CP_Radial_D8.0mm_P3.50mmC1, C4
210kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2
213kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR4, R5
22kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR7, R8
247uFCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC12, C13
2FerriteBeadInductor_SMD:L_1206_3216Metric_Pad1.22x1.90mm_HandSolderFB1, FB2
2LEDMylib:Würth Reverse Mount LEDD1, D2
2TPS73801Package_TO_SOT_SMD:SOT-223-6U2, U3
110RResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3
112v9Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalSW2
115v12Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalSW1
118kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR6
14.7nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC5
1ACM7060Inductor_SMD:L_CommonModeChoke_TDK_ACM7060FL1
1HUSB237Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mmU1
1USB_C_Receptacle_PowerOnly_6PConnector_USB:USB_C_Receptacle_GCT_USB4125-xx-x-0190_6P_TopMnt_HorizontalJ1

More from AKJUS/1590A

12
  • 2 layers32 × 68.5 mmRectifier, the printed circuit board in 3D

    Rectifier

    AKJUS/1590A

    Random odd guitar pedal design in kicad

    49 parts3GPL-2.0
  • 2 layers60 × 60 mmRJ45, the printed circuit board in 3D

    RJ45

    AKJUS/1590A

    Random odd guitar pedal design in kicad

    36 parts3GPL-2.0
  • 2 layers32 × 68.5 mmImSquared, the printed circuit board in 3D

    ImSquared

    AKJUS/1590A

    Random odd guitar pedal design in kicad

    34 parts3GPL-2.0
  • 2 layers32 × 68.5 mmOctaver, the printed circuit board in 3D

    Octaver

    AKJUS/1590A

    Random odd guitar pedal design in kicad

    28 parts3GPL-2.0
  • 2 layers30 × 84 mmVGND, the printed circuit board in 3D

    VGND

    AKJUS/1590A

    Random odd guitar pedal design in kicad

    25 parts3GPL-2.0
  • 2 layers30 × 45 mmDiscrete Rectifier, the printed circuit board in 3D

    Discrete Rectifier

    AKJUS/1590A

    Random odd guitar pedal design in kicad

    24 parts3GPL-2.0
  • 2 layers32 × 68.5 mmOscillator, the printed circuit board in 3D

    Oscillator

    AKJUS/1590A

    Random odd guitar pedal design in kicad

    24 parts3GPL-2.0
  • 2 layers32 × 68.5 mmTremolo, the printed circuit board in 3D

    Tremolo

    AKJUS/1590A

    Random odd guitar pedal design in kicad

    24 parts3GPL-2.0
  • 2 layers32 × 75 mmBoost, the printed circuit board in 3D

    Boost

    AKJUS/1590A

    Random odd guitar pedal design in kicad

    23 parts3GPL-2.0
  • 2 layers32 × 75 mmBaxandall, the printed circuit board in 3D

    Baxandall

    AKJUS/1590A

    Random odd guitar pedal design in kicad

    22 parts3GPL-2.0
  • 2 layers30 × 75 mmRJ45, the printed circuit board in 3D

    RJ45

    AKJUS/1590A

    Random odd guitar pedal design in kicad

    20 parts3GPL-2.0
  • 2 layers32 × 68.5 mmJoiner, the printed circuit board in 3D

    Joiner

    AKJUS/1590A

    Random odd guitar pedal design in kicad

    19 parts3GPL-2.0

Similar boards

  • 2 layers139.7 × 73.7 mm134pin 7-967288-1, the printed circuit board in 3D

    134pin 7-967288-1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    40 parts1.2k
  • 2 layers149.4 × 177.4 mmLightsculpture, the printed circuit board in 3D

    Lightsculpture

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    40 parts915
  • 2 layers150 × 50 mmEleLab v2 Bus150, the printed circuit board in 3D

    EleLab v2 Bus150

    Chrismettal/EleLab_v2

    Cheap DIY lab system for hobbyists and the tinkering folk

    40 parts531GPL-3.0
  • 2 layers66.4 × 48.1 mmRaspberry, the printed circuit board in 3D

    Raspberry

    Chrismettal/flipper-zero-backpacks

    Backpack-style addon boards for the Flipper Zero!

    40 parts456
  • 2 layers44 × 44 mmTrackball, the printed circuit board in 3D

    Trackball

    jfedor2/rp2040-pmw3360

    RP2040+PMW3360 PCB and code

    40 parts432
  • 2 layers90.8 × 53.3 mmABSIS Bus Master, the printed circuit board in 3D

    ABSIS Bus Master

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    40 parts431
  • 2 layers59.6 × 109.5 mmDrop, the printed circuit board in 3D

    Drop

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    40 parts410
  • 2 layers123.8 × 73.5 mmAttic, the printed circuit board in 3D

    Attic

    simondlevy/Hackflight

    Minimalist flight-control toolkit for makers

    40 parts334GPL-3.0

Questions

How big is the USB C PCB?

It measures 80 × 30 mm and has 2 copper layers, 1.6 mm thick.

What parts does the USB C use?

40 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the USB C KiCad files?

From the AKJUS/1590A repository on GitHub, at the commit this page was made from: the board is Power/USB-C.kicad_pcb and its schematic Base/Connectors/Connectors.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the USB C design in my own project?

Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).