Skip to the content
2 layers25 × 27 mmStack chan Takao Base v10, the printed circuit board in 3D

Stack chan Takao Base v10

akita11/Stack-chan_Takao_Base18

Stack-chan sub board for "Takao" bracket

Size
25 × 27 mm
Copper layers
2
Thickness
1.6 mm
Parts
16
Nets
19
Pads
71
Tracks, vias
160, 6
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
23 Mar 2023
Updated
23 May 2023

Overview

Stack chan Takao Base v10 is an open-source printed circuit board by akita11, from the akita11/Stack-chan_Takao_Base repository on GitHub, published under the MIT licence. It is a 2-layer board of 25 × 27 mm with 16 parts on 19 nets, routed with 160 tracks and 6 vias.

Its parts include 5 connectors, 4 capacitors, 4 resistors and 1 switch.

README

README.md

Stack-chan_Takao_Base

現時点で スタックチャン を組み立てる最もシンプルな方法と思われる、タカオさんのタカオ版(旧称:GoBottom版)のための、M5Stack本体と2個のサーボモータ、給電用のUSB TypeCコネクタがついたボードです。電源スイッチもついています。まるごと一式、タカオ版のサーボ固定部分(Bracket)に収納できます。市販のUSB Type-CコネクタつきのACアダプタ等をつないで給電して使用します。以下のように、本体の後ろ側からUSB Type-Cケーブルで給電して動作させることができます。

表面実装部品版

※完成品としてスイッチサイエンスで委託販売中です

挿入実装部品版

※部品キットとしてスイッチサイエンスで委託販売中です

※部品キット版では、作り方の手順で部品をはんだ付けしてください。

他に用意するもの

使い方

  • 筐体の組み立てなどは、タカオさんの手順を参考に行います。
  • M5Stack本体と本ボードはGroveケーブルで接続します
  • 2個のサーボを本ボードに接続します。ボード上の「H1」側には水平方向(足側)のサーボを、「V2」側には上下方向(筐体側)のサーボを接続します。いずれも、サーボのGND側(茶色や黒のケーブル側)を、本ボードの端側(白マークのある側)に挿し込みます。
  • 本ボードを、Bracket(サーボを固定している部品)に収めます。必要に応じて両面テープやネジなどで固定してください。

うまく動作しないときは・・・

「バッテリをはずしたCore2にこのボードとサーボを接続し、Core2側にUSBケーブルをつないでプログラムの書き込みを行う」場合に、Core2が起動しない、またはリセット・再起動を繰り返す、という現象があるようです。その場合は、いったんGroveケーブルをはずしてCore2単体でプログラムを書き込んでから、このボードのUSBコネクタ(本体背面)から電源を供給して使用してください。

おまけ:本ボードを作りたい人は・・・

  • 基板を製造します (ガーバーデータ=Stack-chan_Takao_Base_gerber.zip)

  • 部品を用意します(部品リスト=Stack-chan_Takao_Base_BOM.csv) 主な部品は秋月電子で購入できます。USBコネクタのみ、AliExpressなどから購入します(汎用品のようで、互換の製品が多数あります)

    • 挿入実装版(はんだ付けに自信のない方向け): 抵抗とコンデンサはC1, C2, R3,R4を使います。
    • 表面実装版(はんだ付けに自信のある方向け): 抵抗とコンデンサはC3, C4, R1,R2を使います。

Author

Junichi Akita (akita@ifdl.jp, @akita11)

Parts

16
QtyValueFootprintReferences
2100uCapacitor_SMD:C_1206_3216MetricC3, C4
2100uCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC1, C2
25.1kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR3, R4
25.1kResistor_SMD:R_0603_1608MetricR1, R2
2CON_USB-C-16pakita:USB-C_16p_V_THCN1, CN3
2Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ1, J2
1CON_GROVEakita:CON_GROVE_VCN2
1SW_SPDTakita:SW_SPDT_9x4mm_W2.5mmSW1

The 14 most common of 16 parts.

More from akita11/Stack-chan_Takao_Base

2
  • 2 layers25 × 27 mmStack chan Takao Base v12, the printed circuit board in 3D

    Stack chan Takao Base v12

    akita11/Stack-chan_Takao_Base

    Stack-chan sub board for "Takao" bracket

    15 parts18MIT

Similar boards

  • 2 layers140.5 × 30 mmType e, the printed circuit board in 3D

    Type e

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    16 parts3kApache-2.0
  • 2 layers41.4 × 14.5 mmU2f zero, the printed circuit board in 3D

    U2f zero

    conorpp/u2f-zero

    U2F USB token optimized for physical security, affordability, and style

    16 parts2.4k
  • 2 layers122 × 37 mmV0-UmbilicalBoard, the printed circuit board in 3D

    V0-UmbilicalBoard

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    16 parts1.1kGPL-3.0
  • 2 layers152 × 57.6 mmVideoslotadapter, the printed circuit board in 3D

    Videoslotadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    16 parts1kGPL-3.0
  • 2 layers36 × 63.4 mmSmart ringfinal layout, the printed circuit board in 3D

    Smart ringfinal layout

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    16 parts915
  • 2 layers60 × 40 mmHASwitchPlate, the printed circuit board in 3D

    HASwitchPlate

    aderusha/HASwitchPlate

    LCD touchscreen for Home Automation

    16 parts738MIT
  • 2 layers21.1 × 26.9 mmDemo, the printed circuit board in 3D

    Demo

    easyw/kicadStepUpMod

    kicadStepUp: ECAD to MCAD FreeCAD WorkBench

    16 parts704

Questions

How big is the Stack chan Takao Base v10 PCB?

It measures 25 × 27 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Stack chan Takao Base v10 use?

16 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Stack chan Takao Base v10 KiCad files?

From the akita11/Stack-chan_Takao_Base repository on GitHub, at the commit this page was made from: the board is Stack-chan_Takao_Base_v10.kicad_pcb and its schematic Stack-chan_Takao_Base_v10.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Stack chan Takao Base v10 design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).