Skip to the content
2 layers39 × 11 mmISO2Ch, the printed circuit board in 3D

Digital 2ch isolator with Grove connector

Size
39 × 11 mm
Copper layers
2
Thickness
1.6 mm
Parts
12
Nets
18
Pads
47
Tracks, vias
101, 9
Pours
2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
3 Jul 2024
Updated
3 Jul 2024

Overview

ISO2Ch is an open-source printed circuit board by akita11, from the akita11/ISO2Ch repository on GitHub, published under the MIT licence. It is a 2-layer board of 39 × 11 mm with 12 parts on 18 nets, routed with 101 tracks and 9 vias.

Its parts include 4 capacitors, 2 connectors and 1 IC.

README

README.md

ISO2ch

Chipanalog社のデジタルアイソレータCA-IS3642HWを使った2チャンネルのデジタルアイソレータです。電源と2本のデジタル信号線を電気的に絶縁(分離)することができます。使用しているCA-1364の仕様上、直流から150MHzまでのデジタル信号を伝送できます。

入出力はGroveコネクタで、出力側の電源電圧は5Vと3.3Vから選択でき、また2本のデジタル信号の向きを変更することができます。

基本的な使い方

裏面で、2つのGroveコネクタの種別を確認します。一方が電源の給電側、もう1方が電源の受電側です。 給電側のGroveコネクタに、電源を供給する側の機器(M5Stack等)を接続します。 受電側のGroveコネクタに、電源を受ける側の機器(センサ等)を接続します。受電側には5Vの電源(または3.3Vにも設定可能)が供給されます。

Groveコネクタの2本の信号線の信号(デジタル信号)の向きは、初期状態では2本とも「給電側=入力/受電側=出力」となっています。なお入力信号が未接続のときは出力側は"H"となります。(信号の向き後述のように半田ジャンパで変更できます)※仕様上、I2Cのように双方向の通信が必要な場合には使用できません

給電側・受電側のGroveコネクタのピン配置は以下のとおりです。

  • 1: B (デジタル信号線1)
  • 2: A (デジタル信号線2)
  • 3: VDD
  • 4: GND

設定変更の方法

受電側の電源電圧

表面のJP5で、受電側の電源電圧を設定できます。

  • 中央-△マークのある側をショート(初期状態): 5V
  • 中央-△マークのない側をショート: 3.3V (※中央-△マークのある側の基板パターンをカットしてください)

デジタル信号の方向

裏面のJP1/2/3/4で、2本のデジタル信号線の信号の向きを設定できます。

  • B(デジタル信号線1)

  • JP1とJP4の中央-△マークのある側をショート(初期状態):給電側=入力、受電側=出力

  • JP1とJP4の中央-△マークのない側をショート:給電側=出力、受電側=入力(※中央-△マークのある側の基板パターンをカットしてください)

  • A(デジタル信号線2)

  • JP2とJP3の中央-△マークのある側をショート(初期状態):給電側=入力、受電側=出力

  • JP2とJP3の中央-△マークのない側をショート:給電側=出力、受電側=入力(※中央-△マークのある側の基板パターンをカットしてください)

Author

Junichi Akita (@akita11, akita@ifdl.jp)

Parts

12
QtyValueFootprintReferences
5Jumper_3_Bridged12Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mmJP1, JP2, JP3, JP4, JP5
20.1uCapacitor_SMD:C_0603_1608MetricC2, C3
2CON_GROVEakita:CON_GROVE_HCN1, CN2
110uCapacitor_SMD:C_0603_1608MetricC1
147uCapacitor_SMD:C_0805_2012MetricC4
1ISO_CA-IS3642Package_SO:SOIC-16W_7.5x10.3mm_P1.27mmU1

Similar boards

  • 2 layersNrf bga, the printed circuit board in 3D

    Nrf bga

    github-linguist/linguist

    Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

    12 parts14kMIT
  • 2 layers66.9 × 74.5 mmDeskHop, the printed circuit board in 3D

    DeskHop

    hrvach/deskhop

    Fast Desktop Switching Device

    12 parts7.9kGPL-3.0
  • 2 layers40 × 15 mmSensors, the printed circuit board in 3D

    Sensors

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    12 parts3kApache-2.0
  • 2 layers42.7 × 56.5 mmTle6240 driver, the printed circuit board in 3D

    Tle6240 driver

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    12 parts1.2k
  • 2 layers49 × 25 mm5v boost regulator, the printed circuit board in 3D

    5v boost regulator

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    12 parts915
  • 2 layers28.3 × 10.3 mmTap Photosensor PCB, the printed circuit board in 3D

    Tap Photosensor PCB

    VoronDesign/Voron-Tap

    Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

    12 parts716GPL-3.0
  • 2 layers25.4 × 70.4 mmTpmsniffer, the printed circuit board in 3D

    Tpmsniffer

    stacksmashing/pico-tpmsniffer

    A simple, very experimental TPM sniffer for LPC bus

    12 parts696

Questions

How big is the ISO2Ch PCB?

It measures 39 × 11 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ISO2Ch use?

12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ISO2Ch KiCad files?

From the akita11/ISO2Ch repository on GitHub, at the commit this page was made from: the board is ISO2Ch.kicad_pcb and its schematic ISO2Ch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ISO2Ch design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).