Skip to the content
2 layers91 × 55 mmFlickKBD, the printed circuit board in 3D

LED表示は以下の意味で、タッチやフリック動作の検出状況を確認できます。 - 非タッチ時に点灯 - タッチ時に消灯 - 左or右フリック検出時に1回点滅 - 上or下フリック検出時に2回点滅、

Size
91 × 55 mm
Copper layers
2
Thickness
1.6 mm
Parts
36
Nets
61
Pads
245
Tracks, vias
465, 74
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
6 Aug 2026
Updated
5 Sep 2026

Overview

FlickKBD is an open-source printed circuit board by akita11, from the akita11/FlickKBD repository on GitHub, published under the MIT licence. It is a 2-layer board of 91 × 55 mm with 36 parts on 61 nets, routed with 465 tracks and 74 vias.

Its parts include 16 switches, 5 resistors, 5 connectors, 4 capacitors and 2 ICs.

README

README.md

FlickKBD

静電容量式タッチ検出を使った名刺サイズのフリック入力キーボードです。PC等にUSB(Type-C)で接続し、キーボードとして使うことができます。 かな(ローマ字入力)、英字、数字の3つのモードがあります。

※感度・入力速度はサポートページ内の動画からご確認ください。スマホのフリック入力ほどの実用性はありませんのでご了承ください。またPC等側のキーボードの設定(英字キーボード等)によっては、表示されているものと異なる文字が入力されることがあります。またタッチ検出の補正動作によって、非タッチ時にタッチが検出されてLEDが消灯している場合は、少し待つとLEDが点灯して入力できるようになります。

動作原理と使用例(動画)(ProtoPedia)

使い方

本機のUSB Type-Cコネクタ(基板と一体化)にUSB Type-Cケーブルを刺し、PC等に接続します。 PC等からはUSBキーボードとして認識されます。 (本機には2つのUSBコネクタがありますが、どちらでもOKです)

文字入力

やや強めにタッチしつつゆっくり移動させてフリック入力ができます。 (カッコ内は、左上のキーの場合の入力される文字例)

  • タッチのみ: 基本文字("a")
  • タッチ後、左にマス目の半分ほど移動:左フリック("i")
  • タッチ後、上にマス目の半分ほど移動:上フリック("u")
  • タッチ後、右にマス目の半分ほど移動:上フリック("e")
  • タッチ後、下にマス目の半分ほど移動:上フリック("o")

LED表示は以下の意味で、タッチやフリック動作の検出状況を確認できます。

  • 非タッチ時に点灯
  • タッチ時に消灯
  • 左or右フリック検出時に1回点滅
  • 上or下フリック検出時に2回点滅、

なお、かな(ローマ字)入力モード時に"A/a"キー(左下)を押してから(LEDがやや暗くなる)文字入力を行うと小文字が入力されます。(例:"あ(a)"→"ぁ(xa)"

また、アルファベット入力モード時に"A/a"キー(左下)を押すと、大文字/小文字モードが切り替わります(小文字入力時はLEDがやや暗くなります)

入力モード

"あA1"キー(右端上から2つめ)を押すと、入力モードが切り替わり、以下のようにLEDの色が変わります。

  • かな(ローマ字)入力モード: 緑
  • アルファベット入力モード: 青
  • 数字・記号入力モード: 赤

プログラムの書き換え

ArduinoIDEに、CH55xduinoをインストールし、2つのUSBコネクタからそれぞれのマイコン(CH552)に書き込みます。 事前に、TouchKey.{c,h}を、ArduinoIDEフォルダ内のCH55xduinoフォルダのTouchKey/srcにコピーしてださい(念のため、オリジナルのCH55xduinoの両ファイルはバックアップをとっておいてください)。 (Macの場合は、~/Library/Arduino15/packages/CH55xDuino/hardware/mcs51/0.0.26/libraries/TouchKey/src)

  • USB Settingを"USER CODE w/128B USB RAM"に変更
  • 上側のUSBコネクタ: FlickKBD.ino中の"#define DEV_R"をコメントアウトし、書き込み
  • 右側のUSBコネクタ: FlickKBD.ino中の"#define DEV_R"を残して、書き込み

なおブランクのCH552に初回書き込み時以外は、CH552を、以下の手順でダウンロードモードに設定してください。

  • 右側のUSBコネクタ使用時: 裏面の上図の"1-2"間をジャンパ線等でショートした状態で右側USBコネクタに接続し、1秒ほど保持してからショートを解除する
  • 上側のUSBコネクタ使用時: 裏面の上図の"2-3"間をジャンパ線等でショートした状態で右側USBコネクタに接続し、1秒ほど保持してからショートを解除する

Author

Junichi Akita (akita@ifdl.jp / @akita11)

Parts

36
QtyValueFootprintReferences
16SW_Pushakita:SMD_Key_11mmX_p13mmSW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12, SW13, SW14, SW15, SW16
40.1uCapacitor_SMD:C_0603_1608MetricC1, C2, C3, C4
45.1kResistor_SMD:R_0603_1608MetricR2, R3, R4, R5
3Conn_01x01akita:Pad_SMD1.6mmJ1, J2, J3
2CON_USB-CPCBPLUGakita:USB-C_PCBPLUGCN1, CN2
2Jumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP1, JP2
2MCU_CH552TPackage_SO:TSSOP-20_4.4x6.5mm_P0.65mmU1, U2
110kResistor_SMD:R_0603_1608MetricR1
1LED_WS2812C-2020akita:LED_2020_4pD1
1LOGOLOGOG***

Similar boards

  • 2 layers65 × 30 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    36 parts1kGPL-3.0
  • 2 layers55 × 70 mmArduino v1, the printed circuit board in 3D

    Arduino v1

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    36 parts915
  • 2 layers50.4 × 24.8 mmLEDboardRev3, the printed circuit board in 3D

    LEDboardRev3

    Architeuthis-Flux/Jumperless

    A jumperless breadboard

    36 parts914
  • 2 layers45.7 × 31.8 mmLEDx16 board, the printed circuit board in 3D

    LEDx16 board

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    36 parts803MIT
  • 2 layers32 × 24 mmEsp onelayer3, the printed circuit board in 3D

    Esp onelayer3

    cnlohr/colorchord

    Chromatic Sound to Light Conversion System

    36 parts712
  • 2 layers69 × 53.8 mmTUSS4470 shield, the printed circuit board in 3D

    TUSS4470 shield

    Neumi/open_echo

    Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.

    36 parts530
  • 2 layers99.1 × 53.3 mmABSIS Mega, the printed circuit board in 3D

    ABSIS Mega

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    36 parts431
  • 2 layers16.1 × 119 mmConnectorL, the printed circuit board in 3D

    ConnectorL

    thpoll83/PolyKybd

    PolyKybd

    36 parts411CERN-OHL-W-2.0

Questions

How big is the FlickKBD PCB?

It measures 91 × 55 mm and has 2 copper layers, 1.6 mm thick.

What parts does the FlickKBD use?

36 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the FlickKBD KiCad files?

From the akita11/FlickKBD repository on GitHub, at the commit this page was made from: the board is FlickKBD.kicad_pcb and its schematic FlickKBD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the FlickKBD design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).