

This project focuses on the design of a DC motor driver PCB using the L298N motor driver IC. The schematic and PCB layout were developed in KiCad with proper component placement, routing, and net labeling. The design was validated using ERC and DRC checks and is ready for fabrication.
- Size
- 65.5 × 53.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 15
- Pads
- 56
- Tracks, vias
- 132, 5
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 5 Apr 2026
- Updated
- 5 Apr 2026
Overview
L298N is an open-source printed circuit board by akhil053, from the akhil053/L298-Motor-Driver repository on GitHub. It is a 2-layer board of 65.5 × 53.5 mm with 18 parts on 15 nets, routed with 132 tracks and 5 vias.
It is built around the L298N and L7805. Its parts include 8 diodes, 5 connectors, 2 capacitors and 2 ICs. It belongs with the robots and motor control boards of this library.
Main components
2L298N
Multiwatt-15-25℃~+130℃ 2 2A 4.5V~7V Bipolar Driver Overcurrent Protection、Over temperature protection Yes Multiwatt-15 Stepper Motor Driver ROHSHGSEMIStepper Motor DriverL7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdL298-Motor-Driver
This project focuses on the design of a DC motor driver PCB using the L298N motor driver IC. The schematic and PCB layout were developed in KiCad with proper component placement, routing, and net labeling. The design was validated using ERC and DRC checks and is ready for fabrication.
MotorLink – DC Motor Driver PCB Design
Description
This project involves the design of a DC motor driver PCB using the L298N motor driver IC. The schematic and PCB layout were developed using KiCad.
Features
- Forward and reverse motor control
- Proper net labeling and routing
- Compact PCB layout
Tools Used
- KiCad
Design Validation
- Performed ERC (Electrical Rule Check)
- Performed DRC (Design Rule Check)
Files Included
- Schematic design files
- PCB layout files
- (Optional) Gerber files for fabrication
Preview
(Add images here)
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1N4007 | Diode_SMD:D_SOD-128 | D1, D2, D3, D4, D5, D6, D7, D8 |
| 2 | 220uF | Capacitor_THT:C_Radial_D10.0mm_H12.5mm_P5.00mm | C1, C2 |
| 1 | 5V output | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J5 |
| 1 | Enable | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J3 |
| 1 | L298N | Package_TO_SOT_THT:TO-220-15_P2.54x5.08mm_StaggerOdd_Lead4.58mm_Vertical | U1 |
| 1 | L7805 | Package_TO_SOT_SMD:TO-252-2 | U2 |
| 1 | Motor Output | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_Horizontal | J1 |
| 1 | POWER | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J4 |
| 1 | Signal | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_Horizontal | J2 |
The 17 most common of 18 parts.
Similar boards
- 2 layers96 × 52 mm

- 2 layers112 × 101 mm

- 2 layers67 × 61.5 mm

Quiz
hurryharii/kicad-pcb-learning-project
A work-in-progress PCB designed using KiCad, featuring a 7805 voltage regulator, 1N4007 diodes, capacitors, motor connectors, and test points.
23 parts - 2 layers98 × 140.2 mm

- 2 layers254.1 × 139.2 mm

- 2 layers50.1 × 50 mm

Motor driver
Mahfuz-Sarker136/L298N-Motor-driver-PCB-layout-with-Kicad
A custom, dual-layer L298N Motor Driver PCB module optimized for Robotics,Arduino or ESP-32 project
24 partsMIT - 2 layers100 × 65 mm

- 2 layers145 × 80 mm

Final Competition'
Omar-Hany00/ESP32-Robotic-Arm-Car
Custom ESP32-based RC robotic arm car with integrated PCB, motor control, and servo actuation.
43 parts
Questions
How big is the L298N PCB?
It measures 65.5 × 53.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the L298N use?
18 parts, built around the L298N and L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the L298N KiCad files?
From the akhil053/L298-Motor-Driver repository on GitHub, at the commit this page was made from: the board is L298N.kicad_pcb and its schematic L298N.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the L298N design in my own project?
Its repository states no licence, so its author keeps all rights: ask akhil053 before reusing the design.