

Dream Walker
A walk-in-place locomotion system for VR applications that enables natural movement by classifying user footsteps using IMU (Inertial Measurement Unit) data. This controller reduces motion sickness and enhances immersion by allowing users to walk in VR without physical displacement.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 24
- Pads
- 30
- Tracks, vias
- 26, 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 20 Apr 2025
- Updated
- 18 May 2026
Overview
Dream Walker is an open-source printed circuit board by akash-siv, from the akash-siv/Dream-Walker repository on GitHub, published under the MIT licence. It is a 2-layer board with 3 parts on 24 nets, routed with 26 tracks and 4 vias.
Its parts include 2 ICs and 1 connector. It belongs with the sensors and measurement boards and the ESP32 and RISC-V boards of this library.
README
03-PCB Design/Dream_walker/README.mdDream_walker
Locamotion controller for Steam VR games
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | ESP32-C3_SUPERMINI_SMD | Footprints:MODULE_ESP32-C3_SUPERMINI | U2 |
| 1 | TP4056-module | tp4056-module:tp4056-module | J2 |
| 1 | module_mpu6050 | usini_sensors:module_mpu6050 | U1 |
Similar boards
- 2 layers40 × 30 mm

- 2 layers51.9 × 16 mm

Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm

- 2 layers

Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm

- 2 layers124.5 × 33.7 mm

- 2 layers10.5 × 83 mm

- 2 layers21.2 × 51.3 mm

Pico reset
hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
3 parts1.1kMIT
Questions
What parts does the Dream Walker use?
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Dream Walker KiCad files?
From the akash-siv/Dream-Walker repository on GitHub, at the commit this page was made from: the board is 03-PCB Design/Dream_walker/Dream_walker.kicad_pcb and its schematic 03-PCB Design/Dream_walker/Dream_walker.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Dream Walker design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).