2 layers18.5 × 11.1 mm
Switch
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
6 parts4.3kMIT
2 layers
Adapter35mm
akaFunk/EMI-Test-Reciever-ESAI-RepairAdapters for capacitor replacemnt in an Rohde & Schwarz EMI Test Receiver ESAI
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 6
- Nets
- 2
- Pads
- 6
- Tracks, vias
- 4, 0
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 16 Aug 2018
- Updated
- 16 Aug 2018
Overview
Adapter35mm is an open-source printed circuit board by akaFunk, from the akaFunk/EMI-Test-Reciever-ESAI-Repair repository on GitHub, published under the CC-BY-4.0 licence. It is a 2-layer board with 6 parts on 2 nets, routed with 4 tracks and 0 vias.
README
README.mdAdapters for capacitor replacemnt in an Rohde & Schwarz EMI Test Receiver ESAI
We got an old Rohde & Schwarz EMI Test Receiver ESAI which needed a little repair. The device did not boot when turning it on. Just a few LEDs switched on and nothing more happend. It turned out that two capacitors were shorting one of the power rails. Additionally the responsible fuse was blown. We decided to replace all capacitors to be on the safe side. The file ReplacementCaps.ods gives an overview of the capacitors in the two devices and the possible replacement parts. For the values 4700, 10000 and 2200 µF we were able to find fitting replacements. For the capacitors with the values 15000 and 470 µF we had to use replacements with different footprints. Two PCBs were designed to adapt the two different footprints to the original ones.
Images
Parts
6| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Cap+ | Holes:Hole_1.7mm | J5 |
| 1 | Cap- | Holes:Hole_1.7mm | J6 |
| 1 | Orig- | Holes:Hole_1.3mm | J4 |
| 1 | Orig1 | Holes:Hole_1.3mm | J1 |
| 1 | Orig2 | Holes:Hole_1.3mm | J2 |
| 1 | Orig3 | Holes:Hole_1.3mm | J3 |
Similar boards
- 2 layers14.6 × 33 mm
- 2 layers9 × 9 mm
Dpoint
Jcparkyn/dpoint
Open-source digital stylus using camera tracking and inertial measurements
6 parts1.1kMIT - 2 layers51.5 × 16.6 mm
MicroswitchXY Endstop
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
6 parts1.1kGPL-3.0 - 2 layers21.9 × 76.7 mm
Amiga External
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
6 parts1kGPL-3.0 - 2 layers88.9 × 50.8 mm
Businesscard
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
6 parts915 - 2 layers20.3 × 15.2 mm
L0 RGB led
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
6 parts546MIT - 2 layers9 × 3.6 mm
Questions
What parts does the Adapter35mm use?
6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Adapter35mm KiCad files?
From the akaFunk/EMI-Test-Reciever-ESAI-Repair repository on GitHub, at the commit this page was made from: the board is Adapter35mm/Adapter35mm.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Adapter35mm design in my own project?
Its repository publishes it under the CC-BY-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).