
ThumbsUp
A refinement of v2 ProMicro, three-key thumbcluster, minor configuration adjustment.
- Size
- 251.1 × 457.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 144
- Nets
- 130
- Pads
- 753
- Tracks, vias
- 1,685, 102
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 15 Dec 2023
- Updated
- 14 Aug 2026
Overview
ThumbsUp is an open-source printed circuit board by ak66666, from the ak66666/ThumbsUpUnsplitV9 repository on GitHub. It is a 2-layer board of 251.1 × 457.9 mm with 144 parts on 130 nets, routed with 1,685 tracks and 102 vias.
Its parts include 46 diodes, 38 connectors, 2 resistors, 2 switches and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdThumbsUp! v9 ProMicro-Compatible MCU, Kailh Choc Switches
Multilevel 44/46 Key Contoured Keyboard. 2- or 3-key Thumb Cluster.
- ProMicro pin-compatible MCUs: Atmega32U4, RP2040
- Nice!nano (oritinal and clones) with battery for the bluetooth connectivity, power switch is supposed to be used.
- Supports ProGlide Cirque touchpad.
- Hot swap sockets for switches.
- Compact key spacing (18x17), large MX-size caps won't fit.
![]()
Other pictures in Photos folder.
Firmware
Please refer to this article: https://thumbsupkeyboards.blogspot.com/2024/02/source-files-and-default-firmware.html
Parts
144| Qty | Value | Footprint | References |
|---|---|---|---|
| 46 | D_Small | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +30 |
| 12 | Conn_01x04_Female | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J3, J5, J20, J21, J22, J23, J28, J29, J30, J31, J33, J34 |
| 10 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J2, J4, J6, J7, J8, J24, J25, J26, J27 |
| 8 | Raiser_Female | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J9, J11, J13, J15, J17, J35, J36, J37 |
| 5 | LOGO | Silkscreens:Crowfeet75 | G***, G***, G***, G***, G*** |
| 5 | Raiser_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J10, J12, J14, J16, J18 |
| 2 | 5.1K | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | 52559-1233 | 52559-1233:525591233 | J19, J38 |
| 2 | SwLMOD | keyswitches:Kailh_socket_PG1350_optional | MX18, MX47 |
| 2 | SwLSHFT | keyswitches:Kailh_socket_PG1350_optional | MX22, MX48 |
| 2 | SwRMOD | keyswitches:Kailh_socket_PG1350_optional | MX30, MX50 |
| 2 | SwRSHFT | keyswitches:Kailh_socket_PG1350_optional | MX26, MX49 |
| 1 | Battery | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J32 |
| 1 | ProMicro | promicro:ProMicro | U1 |
| 1 | SW_DIP_x01 | 1825232-1:18252321 | SW2 |
| 1 | SW_Push | random-keyboard-parts:SKQG-1155865 | SW1 |
| 1 | Sw? | keyswitches:Kailh_socket_PG1350_optional | MX41 |
| 1 | SwA | keyswitches:Kailh_socket_PG1350_optional | MX5 |
| 1 | SwB | keyswitches:Kailh_socket_PG1350_optional | MX21 |
| 1 | SwBKSP | keyswitches:Kailh_socket_PG1350_optional | MX42 |
| 1 | SwC | keyswitches:Kailh_socket_PG1350_optional | MX13 |
| 1 | SwCOLON | keyswitches:Kailh_socket_PG1350_optional | MX40 |
| 1 | SwCOMMA | keyswitches:Kailh_socket_PG1350_optional | MX33 |
| 1 | SwD | keyswitches:Kailh_socket_PG1350_optional | MX12 |
| 1 | SwDOT | keyswitches:Kailh_socket_PG1350_optional | MX37 |
| 1 | SwE | keyswitches:Kailh_socket_PG1350_optional | MX11 |
| 1 | SwENTER | keyswitches:Kailh_socket_PG1350_optional | MX43 |
| 1 | SwESC | keyswitches:Kailh_socket_PG1350_optional | MX1 |
| 1 | SwF | keyswitches:Kailh_socket_PG1350_optional | MX16 |
| 1 | SwG | keyswitches:Kailh_socket_PG1350_optional | MX20 |
| 1 | SwH | keyswitches:Kailh_socket_PG1350_optional | MX24 |
| 1 | SwI | keyswitches:Kailh_socket_PG1350_optional | MX31 |
| 1 | SwJ | keyswitches:Kailh_socket_PG1350_optional | MX28 |
| 1 | SwK | keyswitches:Kailh_socket_PG1350_optional | MX32 |
| 1 | SwL | keyswitches:Kailh_socket_PG1350_optional | MX36 |
| 1 | SwLALT | keyswitches:Kailh_socket_PG1350_optional | MX14 |
| 1 | SwLCTL | keyswitches:Kailh_socket_PG1350_optional | MX3 |
| 1 | SwLWIN | keyswitches:Kailh_socket_PG1350_optional | MX10 |
| 1 | SwM | keyswitches:Kailh_socket_PG1350_optional | MX29 |
| 1 | SwMENU | keyswitches:Kailh_socket_PG1350_optional | MX38 |
| 1 | SwN | keyswitches:Kailh_socket_PG1350_optional | MX25 |
| 1 | SwO | keyswitches:Kailh_socket_PG1350_optional | MX35 |
| 1 | SwP | keyswitches:Kailh_socket_PG1350_optional | MX39 |
| 1 | SwQ | keyswitches:Kailh_socket_PG1350_optional | MX4 |
| 1 | SwR | keyswitches:Kailh_socket_PG1350_optional | MX15 |
| 1 | SwRALT | keyswitches:Kailh_socket_PG1350_optional | MX34 |
| 1 | SwRCTRL | keyswitches:Kailh_socket_PG1350_optional | MX44 |
| 1 | SwS | keyswitches:Kailh_socket_PG1350_optional | MX8 |
| 1 | SwT | keyswitches:Kailh_socket_PG1350_optional | MX19 |
| 1 | SwTAB | keyswitches:Kailh_socket_PG1350_optional | MX2 |
| 1 | SwThL | keyswitches:Kailh_socket_PG1350_optional | MX45 |
| 1 | SwThR | keyswitches:Kailh_socket_PG1350_optional | MX46 |
| 1 | SwU | keyswitches:Kailh_socket_PG1350_optional | MX27 |
| 1 | SwV | keyswitches:Kailh_socket_PG1350_optional | MX17 |
| 1 | SwW | keyswitches:Kailh_socket_PG1350_optional | MX7 |
| 1 | SwX | keyswitches:Kailh_socket_PG1350_optional | MX9 |
| 1 | SwY | keyswitches:Kailh_socket_PG1350_optional | MX23 |
| 1 | SwZ | keyswitches:Kailh_socket_PG1350_optional | MX6 |
Similar boards
- 2 layers100 × 100 mm

- 2 layers335.9 × 145.9 mm

Split70kb
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
144 parts915 - 2 layers133.6 × 93 mm

- 2 layers69 × 44 mm

- 2 layers285 × 94.2 mm

Keyboard x2-lumberjack arm
rgoulter/keyboard-labs
Repo with my PCB designs and keyboard firmware
144 parts236 - 2 layers65.1 × 30.2 mm

- 2 layers99.4 × 53.7 mm

- 2 layers284.7 × 94.2 mm

Nyan keys v09b
portlandhodl/nyan-keys-hardware
Hardware document for the nyan keys keyboard
144 parts96Apache-2.0
Questions
How big is the ThumbsUp PCB?
It measures 251.1 × 457.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ThumbsUp use?
144 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ThumbsUp KiCad files?
From the ak66666/ThumbsUpUnsplitV9 repository on GitHub, at the commit this page was made from: the board is ThumbsUp.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ThumbsUp design in my own project?
Its repository states no licence, so its author keeps all rights: ask ak66666 before reusing the design.