
Daylight Matchstick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

VOLT AMP METER 72MM is an open-source printed circuit board by ak-electronics, from the ak-electronics/volt-amp-meter-72mm-pcb repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 56.4 × 60.5 mm with 22 parts on 27 nets, routed with 332 tracks and 0 vias.
Its parts include 5 capacitors, 5 resistors, 4 ICs, 3 connectors and 2 diodes. It belongs with the audio and music boards and the STM8 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | C | custom:Resistor_1206 | C3, C4, C5 |
| 2 | CA56-12SYKWA | Displays_7-Segment:CA56-12SYKWA | U2, U3 |
| 2 | Conn_01x01 | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.00mm | J2, J3 |
| 2 | Conn_01x01 | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | Ct, Ct |
| 1 | LOGO | ~ | |
| 1 | 1.5KR | custom:Resistor_1206 | R5 |
| 1 | 100R | Resistors_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P20.32mm_Horizontal | R1 |
| 1 | 100R | custom:Resistor_1206 | R6 |
| 1 | 330KR | custom:Resistor_1206 | R4 |
| 1 | 470KR | custom:Resistor_1206 | R2 |
| 1 | 470uf | Capacitors_THT:CP_Radial_D8.0mm_P5.00mm | C2 |
| 1 | 684J | Capacitors_THT:C_Axial_L3.8mm_D2.6mm_P15.00mm_Horizontal | C1 |
| 1 | 7.5V | Diodes_THT:D_5W_P10.16mm_Horizontal | D2 |
| 1 | Conn_01x05 | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.54mm | J1 |
| 1 | D_Bridge_+-AA | MB10_Bridge:MB10_bridge | D1 |
| 1 | L78L05_TO92 | TO_SOT_Packages_THT:TO-92_Inline_Wide | U4 |
| 1 | STM8003F3 | custom:SSOP-20_custom | U1 |

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

abhishek-kakkar/BeagleLogic
A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.

Chrismettal/flipper-zero-backpacks
Backpack-style addon boards for the Flipper Zero!



CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
It measures 56.4 × 60.5 mm and has 2 copper layers, 1.6 mm thick.
22 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ak-electronics/volt-amp-meter-72mm-pcb repository on GitHub, at the commit this page was made from: the board is VOLT AMP METER 72MM.kicad_pcb and its schematic VOLT AMP METER 72MM.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).