
Quad unibody placement0
ajwock/quadcopter
Quadcopter designed and programmed thoroughly from scratch

Quadcopter designed and programmed thoroughly from scratch
Quadcopter is an open-source printed circuit board by ajwock, from the ajwock/quadcopter repository on GitHub. It is a 2-layer board of 34.3 × 85.1 mm with 41 parts on 48 nets, routed with 135 tracks and 14 vias.
It is built around the RQ5E040AJTCL and LE33CZ-TR. Its parts include 20 resistors, 13 ICs, 4 capacitors and 4 diodes. It belongs with the robots and motor control boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | .25 | Resistor_SMD:R_0805_2012Metric | R5, R6, R8, R9, R15, R16, R18, R19 |
| 5 | 2pin_header | Imported:2-bb | U4, U7, U8, U11, U12 |
| 4 | .47 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R7, R10, R17, R20 |
| 4 | 100 | Resistor_SMD:R_0603_1608Metric | R3, R4, R13, R14 |
| 4 | 4k7 | Resistor_SMD:R_0603_1608Metric | R1, R2, R11, R12 |
| 4 | D_Schottky | Imported:SM6F22AY | D1, D2, D3, D4 |
| 4 | RQ5E040AJTCL | Imported:SOT95P280X100-3N | U5, U6, U9, U10 |
| 2 | .1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4 |
| 2 | 470uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1, C2 |
| 1 | 3pin_header | Imported:3-bb | U2 |
| 1 | 8pin_header | Imported:8-bb | U1 |
| 1 | LE33CZ-TR | Imported:LE33CZTR | U13 |
| 1 | Rust_Board | Rust_Board:Rust_Board | U3 |

ajwock/quadcopter
Quadcopter designed and programmed thoroughly from scratch





ajwock/quadcopter
Quadcopter designed and programmed thoroughly from scratch

ajwock/quadcopter
Quadcopter designed and programmed thoroughly from scratch

ajwock/quadcopter
Quadcopter designed and programmed thoroughly from scratch

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI


kpayinda/CAN_BREAKOUT_PCB
Breakout board for the CANFD transceivers being used for the PIM (p4p)


ESD625-Fedtmules-muler/PublicAppendix
Public Appendix for the 6th semester project. Consisting of test data.


VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
It measures 34.3 × 85.1 mm and has 2 copper layers, 1.6 mm thick.
41 parts, built around the RQ5E040AJTCL and LE33CZ-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ajwock/quadcopter repository on GitHub, at the commit this page was made from: the board is cad/quadcopter/quadcopter.kicad_pcb and its schematic cad/home_copter/home_copter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ajwock before reusing the design.