ajuhidalgo/01_Energex8101 Energex8PCB v1.0 is an open-source printed circuit board by ajuhidalgo, from the ajuhidalgo/01_Energex8 repository on GitHub. It is a 4-layer board of 205 × 92 mm with 107 parts on 67 nets, routed with 314 tracks and 4 vias.
It is built around the B2B-PH-K-S(LF)(SN), XT60-M and SMAJ13CA. Its parts include 39 connectors, 20 resistors, 18 diodes, 12 ICs and 11 fuses.
ENGERGEX 8 BOARD
| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | B2B-PH-K-S | 01_Footprints:B2B-PH-K-S | J4, J12, J15, J18, J21, J24, J27, J30, J32, J33, J34, J35, J36, J37, J38, J39 +2 |
| 13 | XT60-M | 01_Footprints:XT60-M | J1, J2, J3, J6, J7, J10, J13, J16, J19, J22, J25, J28, J31 |
| 12 | 0986AH0304 | 01_Footprints:0986AH0304 | U1, U2, U3, U4, U5, U6, U7, U8, U9, U10, U11, U12 |
| 12 | 100 Ohm | Resistor_SMD:R_1206_3216Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12 |
| 12 | D | Diode_SMD:D_1206_3216Metric | D1, D2, D9, D10, D11, D12, D13, D14, D15, D16, D17, D18 |
| 11 | 3557-2 | 01_Footprints:keystone_electronics_3557-2 | F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11 |
| 8 | 510 Ohm | Resistor_SMD:R_1206_3216Metric | R13, R14, R15, R16, R17, R18, R19, R20 |
| 8 | 61300211121 | 01_Footprints:61300211121 | J8, J11, J14, J17, J20, J23, J26, J29 |
| 6 | SMAJ13CA | Diode_SMD:D_SMA | D3, D4, D5, D6, D7, D8 |
| 3 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3 |
| 1 | LOGO | 01_Footprints:Energex8Logo | G*** |
| 1 | LOGO | 01_Footprints:EA7LAULogo2_UserDrawings | G*** |
| 1 | LOGO | 01_Footprints:Energex8Logo_UserDrawings | G*** |
| 1 | LOGO | 01_Footprints:EA7LAULogo2 | G*** |
BYU-I-eBadge/e-badge
A hackable eBadge platform for students — a customizable, programmable electronics badge designed for hands-on learning and creative exploration throughout their academic journey.
86kkd/millionBoard
Amazing 500million sensor enetric skateboard use body center of gravity to control !!!
aravindjayan/CamRover
PCB and bringup codebase for an ESP32-S3 based wheeled robot with an OV2640 camera. Built for IIT Palakkad EE4505 course.
Konstantin-Dudersky/plc-modules
После открыть файл в Inkscape и изменить размер страницы
rivotmotors-rnd/ECU_Firmware_V3
RIVOT ECU V3.0 Repo containing STM32F446RE firmware and KiCad PCB hardware designs.
tonycung/0-10V-to-4-20mA-Converter
A simple 0–10 V to 4–20 mA analog signal converter designed with KiCad.
It measures 205 × 92 mm and has 4 copper layers, 1.6 mm thick.
107 parts, built around the B2B-PH-K-S(LF)(SN), XT60-M and SMAJ13CA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ajuhidalgo/01_Energex8 repository on GitHub, at the commit this page was made from: the board is 02_Boards/01_Energex8PCB_v1.0/01_Energex8PCB_v1.0.kicad_pcb and its schematic 02_Boards/01_Energex8PCB_v1.0/01_Energex8PCB_v1.0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ajuhidalgo before reusing the design.