Skip to the content
2 layers15.2 × 26.7 mmLiadBoard, the printed circuit board in 3D

A repo of circuitry designed during my DPhil.

Size
15.2 × 26.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
5
Nets
2
Pads
8
Tracks, vias
9, 2
Pours
10
Routed
Yes
KiCad
KiCad 4
Created
21 Aug 2019
Updated
5 Feb 2020

Overview

LiadBoard is an open-source printed circuit board by ajbarker93, from the ajbarker93/circuits repository on GitHub. It is a 2-layer board of 15.2 × 26.7 mm with 5 parts on 2 nets, routed with 9 tracks and 2 vias.

Its parts include 1 capacitor, 1 diode and 1 connector.

README

README.md

circuits

A repository of printed circuit boards designed using KiCad.

LIAD: a PCB mount for ultra-violet LEDs. Intended use: illumination of a magneto-optical trap chamber to boost vapour pressure.

NI-SCSI: a digitally-isolated breakout for a National Instruments SCSI connector to generate 4x8 data lines for serial communication. Each block of 8 digital lines is combined with a regulated voltage source.

Urukul: a PCB to convert TTL digital signals into LVDS signals for compatibility with the Sinara Urukul DDS board (https://github.com/sinara-hw/Urukul/wiki).

Parts

5
QtyValueFootprintReferences
110uCapacitors_SMD:C_0805_HandSolderingC1
1Conn_01x02Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mmJ1
1UVUVLed:890-3954D1

The 3 most common of 5 parts.

More from ajbarker93/circuits

3
  • 2 layers100.3 × 49.5 mmUrukulConnector, the printed circuit board in 3D

    UrukulConnector

    ajbarker93/circuits

    A repo of circuitry designed during my DPhil.

    47 parts
  • 2 layersUrukulUnit, the printed circuit board in 3D

    UrukulUnit

    ajbarker93/circuits

    A repo of circuitry designed during my DPhil.

    42 parts
  • 2 layers149.9 × 100.3 mmNI SCSI Breakout, the printed circuit board in 3D

    NI SCSI Breakout

    ajbarker93/circuits

    A repo of circuitry designed during my DPhil.

    40 parts

Similar boards

  • 2 layers98 × 27 mmXy limit, the printed circuit board in 3D

    Xy limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    5 parts3.7k
  • 2 layers21 × 33 mm24g2usb pico2w, the printed circuit board in 3D

    24g2usb pico2w

    joypad-ai/joypad-os

    Universal controller firmware for building adapters, dongles, and custom controllers.

    5 parts1.7kApache-2.0
  • 2 layers53.2 × 59.6 mmA10 OLinuXino Lime Rev B SHIELD TEMPLATE, the printed circuit board in 3D

    A10 OLinuXino Lime Rev B SHIELD TEMPLATE

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    5 parts1.5k
  • 2 layers30 × 11 mmMain control board servo tester, the printed circuit board in 3D

    Main control board servo tester

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    5 parts1.1k
  • 2 layers78.8 × 35.3 mmKiCadTest, the printed circuit board in 3D

    KiCadTest

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    5 parts915
  • 2 layers50 × 23 mmMiniCircuits LTCC, the printed circuit board in 3D

    MiniCircuits LTCC

    VanceVagell/kv4p-ht

    Open source handheld ham radio project KV4P-HT

    5 parts828GPL-3.0
  • 2 layers20.3 × 15.2 mmL0 light sensor, the printed circuit board in 3D

    L0 light sensor

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    5 parts546MIT

Questions

How big is the LiadBoard PCB?

It measures 15.2 × 26.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LiadBoard use?

5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LiadBoard KiCad files?

From the ajbarker93/circuits repository on GitHub, at the commit this page was made from: the board is LIAD/LiadBoard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the LiadBoard design in my own project?

Its repository states no licence, so its author keeps all rights: ask ajbarker93 before reusing the design.