
YukaLink revA
Misaka0x2730/YukaLink
Dual targets USB+ETH ARM JTAG/SWD debugger (BlackMagic port) based on RP2350. JTAG and SWD interfaces are implemented on PIO.

Digital isolator USB-C and JTAG board
JTAG ISOLATOR is an open-source printed circuit board by aiwachow, from the aiwachow/USBC-AND-JTAG-ISOLATOR repository on GitHub. It is a 2-layer board of 50 × 50 mm with 10 parts on 30 nets.
It is built around the SI8641BB-B-IS1 and MBR0520. Its parts include 4 capacitors, 2 ICs and 2 diodes. It belongs with the interfaces and adapters boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | MBR0520 | Diode_SMD:D_SOD-123 | D3, D4 |
| 2 | Si8641BB-B-IS1 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2, U3 |
| 1 | 100n | Capacitor_SMD:C_0402_1005Metric | C142 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric | C151 |
| 1 | 10u | Capacitor_SMD:C_0402_1005Metric | C141 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C145 |
| 1 | SN6501DBVR | SamacSys_Parts:SOT95P280X145-5N | PS1 |
| 1 | WE-PPTI_1006 | WE-PPTI_1006:WE-PPTI_1006_L10.2W6.73H4.19 | T1 |

Misaka0x2730/YukaLink
Dual targets USB+ETH ARM JTAG/SWD debugger (BlackMagic port) based on RP2350. JTAG and SWD interfaces are implemented on PIO.

paltatech/VESC-controller
Made open source with KiCAD, an open source EDA tool.
Spritetm/picframe_colepd
A WiFi picture frame allowing for remote photo uploads, using an ESP32-C3 and a 5.6" color E-ink display




riktw/HUB75E_ICE40
SpinalHDL code to drive a 64*64 pixel HUB75E module with an ICE40
It measures 50 × 50 mm and has 2 copper layers, 1.6 mm thick.
10 parts, built around the SI8641BB-B-IS1 and MBR0520. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the aiwachow/USBC-AND-JTAG-ISOLATOR repository on GitHub, at the commit this page was made from: the board is JTAG_ISOLATOR.kicad_pcb and its schematic JTAG_ISOLATOR.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask aiwachow before reusing the design.