Skip to the content
4 layers160 × 75.5 mmYl16x16 p2, the printed circuit board in 3D

A bioinspired electronic skin system for robotic applications, combining FSR (force-sensing resistor) arrays and accelerometer arrays.

Size
160 × 75.5 mm
Copper layers
4
Thickness
0.2 mm
Parts
2
Nets
36
Pads
36
Tracks, vias
64, 32
Pours
95
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
27 Jun 2022
Updated
7 May 2026

Overview

Yl16x16 p2 is an open-source printed circuit board by Aightech, from the Aightech/e-skin repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 160 × 75.5 mm with 2 parts on 36 nets, routed with 64 tracks and 32 vias.

It is built around the FPC-05F-16PH20.

Main components

1

README

README.md

E-Skin

A bioinspired electronic skin system for robotic applications, combining FSR (force-sensing resistor) arrays and accelerometer arrays.

Overview

The electronic board uses two multiplexers and two 16-channel ADCs to read the FSRs. The multiplexers select the row or column of the FSR array, while the ADCs read the sensor values. A Teensy 4.1 controls the multiplexers and ADCs and sends data to the computer via USB or Ethernet.

Operation modes:

  • Single mode: Connect one FSR array with up to 32x32 sensors
  • Dual mode: Connect two FSR arrays with up to 16x16 sensors each

Sampling rate: ~400 KHz/channel (1562.5 Hz for a 16x16 array)

Project Structure

text
e-skin/
├── host/           # C++/Qt host application
│   ├── src/        # Source code (main.cpp)
│   └── lib/        # Git submodules (com_client, built_lsl)
├── src/            # Teensy firmware
│   └── Eskin/      # Main production firmware
├── models/         # KiCAD PCB designs
│   ├── KiCAD/              # Main control board (MUX + ADC)
│   ├── customSquare16x16/  # 16x16 FSR array
│   ├── customSquare8x8/    # 8x8 FSR array
│   ├── LIS2DH_array/       # LIS2DH accelerometer array
│   ├── KX134_array/        # KX134 accelerometer array
│   └── inskinacc/          # In-skin accelerometer
└── script/         # Python/MATLAB data acquisition scripts

Requirements

Host Application

  • CMake 3.3+
  • Qt6 (Core, Widgets, PrintSupport)
  • C++11 compiler

Firmware

  • Arduino IDE or PlatformIO
  • Teensy 4.1 board support

Python Scripts

  • Python 3.x
  • Dependencies: pip install -r script/requirements.txt

Building

Host Application

bash
cd host
mkdir build && cd build
cmake .. && make
./FSR_array -h  # Show usage

Firmware

Upload src/Eskin/Eskin.ino to Teensy 4.1 using Arduino IDE or PlatformIO.

  • Board: Teensy 4.1
  • Port: /dev/ttyACM0 (Linux) or COMx (Windows)

Python Data Recorder

bash
pip install -r script/requirements.txt
python script/record.py <port> <array_size>
# Example: python script/record.py /dev/ttyACM0 16

Communication Protocol

  • Serial: 500000 baud
  • Ethernet: TCP port 5000
  • Command format: 1 byte (2 MSB = mode, 6 LSB = array size)
    • Mode 0: Request 1 FSR array
    • Mode 1: Request 2 FSR arrays
    • Mode 2: Request 1 ACC array
    • Mode 3: Request 1 ACC array + 2 FSR arrays
  • Response: 4-byte timestamps + uint16_t sensor data

Submodule Dependencies

Initialize submodules:

bash
git submodule update --init --recursive

Example

See main.cpp for an example of how to use the communication library.

Contributing

See CONTRIBUTING.md for details on our code of conduct and the process for submitting pull requests.

Parts

2
QtyValueFootprintReferences
2FPC-05F-16PH2000_lcsc:FPC-SMD_16P-P0.50_FPC-05F-16PH20FPC1, FPC2

More from Aightech/e-skin

11
  • 2 layers113 × 113 mmLIS3DH array, the printed circuit board in 3D

    LIS3DH array

    Aightech/e-skin

    A bioinspired electronic skin system for robotic applications, combining FSR (force-sensing resistor) arrays and accelerometer arrays.

    146 parts2GPL-3.0
  • 4 layers100 × 100 mmFsr array, the printed circuit board in 3D

    Fsr array

    Aightech/e-skin

    A bioinspired electronic skin system for robotic applications, combining FSR (force-sensing resistor) arrays and accelerometer arrays.

    94 parts2GPL-3.0
  • 2 layers113 × 113 mmLIS2DH array, the printed circuit board in 3D

    LIS2DH array

    Aightech/e-skin

    A bioinspired electronic skin system for robotic applications, combining FSR (force-sensing resistor) arrays and accelerometer arrays.

    82 parts2GPL-3.0
  • 2 layers83.2 × 88.6 mmKX134 array, the printed circuit board in 3D

    KX134 array

    Aightech/e-skin

    A bioinspired electronic skin system for robotic applications, combining FSR (force-sensing resistor) arrays and accelerometer arrays.

    40 parts2GPL-3.0
  • 4 layers82 × 47 mmFSRray, the printed circuit board in 3D

    FSRray

    Aightech/e-skin

    A bioinspired electronic skin system for robotic applications, combining FSR (force-sensing resistor) arrays and accelerometer arrays.

    26 parts2GPL-3.0
  • 2 layers7.7 × 6.8 mmInSkinAccv2, the printed circuit board in 3D

    InSkinAccv2

    Aightech/e-skin

    A bioinspired electronic skin system for robotic applications, combining FSR (force-sensing resistor) arrays and accelerometer arrays.

    14 parts2GPL-3.0
  • 4 layers15.3 × 27.5 mmFSRrayDMUX ADC, the printed circuit board in 3D

    FSRrayDMUX ADC

    Aightech/e-skin

    A bioinspired electronic skin system for robotic applications, combining FSR (force-sensing resistor) arrays and accelerometer arrays.

    11 parts2GPL-3.0
  • 2 layers142 × 30 mmCustomFSReay, the printed circuit board in 3D

    CustomFSReay

    Aightech/e-skin

    A bioinspired electronic skin system for robotic applications, combining FSR (force-sensing resistor) arrays and accelerometer arrays.

    10 parts2GPL-3.0
  • 2 layers12.5 × 11 mmInskinacc, the printed circuit board in 3D

    Inskinacc

    Aightech/e-skin

    A bioinspired electronic skin system for robotic applications, combining FSR (force-sensing resistor) arrays and accelerometer arrays.

    5 parts2GPL-3.0
  • 2 layers60.5 × 42 mmCustomSquare16x16, the printed circuit board in 3D

    CustomSquare16x16

    Aightech/e-skin

    A bioinspired electronic skin system for robotic applications, combining FSR (force-sensing resistor) arrays and accelerometer arrays.

    4 parts2GPL-3.0
  • 4 layers190 × 139 mmYl16x16 p1, the printed circuit board in 3D

    Yl16x16 p1

    Aightech/e-skin

    A bioinspired electronic skin system for robotic applications, combining FSR (force-sensing resistor) arrays and accelerometer arrays.

    3 parts2GPL-3.0

Similar boards

  • 2 layers82 × 58 mmNoirShot, the printed circuit board in 3D

    NoirShot

    rabinniroula/NoirShot

    instant thermal camera

    50 parts2
  • 4 layers90 × 80 mmGlider, the printed circuit board in 3D

    Glider

    pdyxs/glider

    Fork of zephray/glider (Modos Glider e-ink monitor) with a DP AUX polarity fix and a standalone GCC firmware build

    379 partsCERN-OHL-S-2.0
  • 4 layers25 × 35 mmQfn csi underpad diff, the printed circuit board in 3D

    Qfn csi underpad diff

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    2 parts744MIT
  • 4 layers25.7 × 13 mmCpw test, the printed circuit board in 3D

    Cpw test

    loxodes/vna

    Under development open hardware microwave vector network analyzer

    2 parts205
  • 4 layers54 × 16 mmBnc test, the printed circuit board in 3D

    Bnc test

    azonenberg/starshipraider

    Open hardware test equipment

    2 parts193BSD-3-Clause
  • 4 layers94 × 53.4 mmMegaProgrammer, the printed circuit board in 3D

    MegaProgrammer

    clydeshaffer/gametank

    design files for the gametank hardware implementation

    2 parts150
  • 4 layers90.2 × 55.9 mmArduinox86 486 shield, the printed circuit board in 3D

    Arduinox86 486 shield

    dbalsom/arduinoX86

    An interface between an Arduino Due or Arduino GIGA and 8088, 8086, V20, V30, 186 or 286 CPUs

    2 parts114
  • 4 layers45.3 × 11.8 mmIdeswap, the printed circuit board in 3D

    Ideswap

    agranlund/raven

    Homemade MC68060 + DSP56303 Atari-compatible computer. Hardware, firmware, and software stack

    2 parts87

Questions

How big is the Yl16x16 p2 PCB?

It measures 160 × 75.5 mm and has 4 copper layers, 0.2 mm thick.

What parts does the Yl16x16 p2 use?

2 parts, built around the FPC-05F-16PH20. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Yl16x16 p2 KiCad files?

From the Aightech/e-skin repository on GitHub, at the commit this page was made from: the board is models/yl16x16_p2/yl16x16_p2.kicad_pcb and its schematic models/FSRray/FSRray.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Yl16x16 p2 design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).