

InuinoV3
Arduino 3rd-party μ-controller board based on ATmega644P / ATmega1284P, using official Arduino AVR core inside the Arduino IDE.
- Size
- 68.6 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 59
- Nets
- 79
- Pads
- 267
- Tracks, vias
- 783, 60
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 23 Feb 2019
- Updated
- 16 Aug 2019
Overview
InuinoV3 is an open-source printed circuit board by aiex718, from the aiex718/Inuino repository on GitHub, published under the LGPL-2.1 licence. It is a 2-layer board of 68.6 × 53.3 mm with 59 parts on 79 nets, routed with 783 tracks and 60 vias.
It is built around the CP2102N-A01-GQFN28R, AMS1117-3.3 and AMS1117-5.0, with the SM4007 among its other parts. Its parts include 17 capacitors, 15 connectors, 11 resistors, 7 diodes and 4 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4CP2102N-A01-GQFN28R
QFN-28-EP(5x5)-40℃~+85℃ 13.7mA 195uA 3Mbps 3V~3.6V Transceiver USB 2.0 QFN-28-EP(5x5) USB Converters ROHSSilicon LabsUSB ConvertersAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsAMS1117-5.0
SOT-223-40℃~+125℃ 1 1.3V 15V 1A 5V 60dB Fixed Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSM4007
MELFMELF Diodes - General Purpose ROHSYONGYUTAIDiodes - General Purpose
README
README.mdInuino
An Arduino Uno compatible microcontroller dev board based on the ATmega644P / ATmega1284P, using official core inside Arduino IDE.

Usage
Add this link to boards manager
https://raw.githubusercontent.com/aiex718/Inuino/master/Release/package_inuino_index.json
Parts
59| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C4, C5, C12, C13, C14, C15 |
| 6 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R3, R5, R6, R7, R12 |
| 4 | CONN_01X01 | Socket_Arduino_Uno:Arduino_1pin | P5, P6, P7, P8 |
| 3 | 47uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C8, C9, C10 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C7, C11 |
| 2 | 22p | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C29, C30 |
| 2 | 300 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4, R8 |
| 2 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3, C6 |
| 1 | 16M | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R10 |
| 1 | 1N5819 | Diode_SMD:D_SMA_Handsoldering | D3 |
| 1 | 22.1K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | 47.5K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R11 |
| 1 | 500mA | Fuse:Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F1 |
| 1 | 8M | Crystal:Crystal_HC49-U_Vertical | Y2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | CP2102N-A01-GQFN28 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm_ThermalVias | U2 |
| 1 | IC--ATMEGA644PA-AU | Package_QFP:LQFP-44_10x10mm_P0.8mm | U1 |
| 1 | ICSP | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | IO0 | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J6 |
| 1 | IO1 | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J3 |
| 1 | IO2 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J7 |
| 1 | IO3 | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J8 |
| 1 | Jack-DC | Connector_BarrelJack:BarrelJack_Wuerth_6941xx301002 | J9 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D7 |
| 1 | POWER | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |
| 1 | POWER_CONN | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | RXD | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | SM4007 | Diode_SMD:D_SMA_Handsoldering | D6 |
| 1 | SW_DIP_x02 | Button_Switch_THT:SW_TH_Tactile_Omron_B3F-10xx | SW1 |
| 1 | TXD | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D5 |
| 1 | USB_B | Connector_USB:USB_B_OST_USB-B1HSxx_Horizontal | J5 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J2 |
| 1 | USB_CONN | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | VBUS_Jmp | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J11 |
| 1 | VDD_Jmp | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J10 |
The 58 most common of 59 parts.
Similar boards
- 2 layers107 × 62 mm

- 2 layers82 × 94 mm

LIBV
LIBVproject/LIBV-ventilator-pcb
Low Resource Ventilator Project to fight against COVID-19.
127 partsMIT - 2 layers262.5 × 107.9 mm

Commodore pet clone
DLehenbauer/commodore-pet-clone
Open hardware clone of the Commodore PET 4032
316 parts13CC0-1.0 - 2 layers

- 4 layers100 × 50 mm

Pcm5102a mux board
cbaurtx/RetroBox
RetroBox is an internet radio using an ESP32-S3 system on a chip
86 parts - 2 layers99.1 × 99 mm

XDuinoRail Debug
chatelao/xDuinoRail-Decoder
The friendly decoder development plattform for model railroad tinkers.
170 partsAGPL-3.0 - 2 layers81 × 28.5 mm

- 4 layers100 × 100 mm

Questions
How big is the InuinoV3 PCB?
It measures 68.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the InuinoV3 use?
59 parts, built around the CP2102N-A01-GQFN28R, AMS1117-3.3, AMS1117-5.0 and SM4007. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the InuinoV3 KiCad files?
From the aiex718/Inuino repository on GitHub, at the commit this page was made from: the board is Pcb/InuinoV3.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the InuinoV3 design in my own project?
Its repository publishes it under the LGPL-2.1 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).