
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

TTB KiCAD FIles is an open-source printed circuit board by AHNox, from the AHNox/TTB-KiCAD-FIles repository on GitHub. It is a 2-layer board of 201.2 × 86.7 mm with 10 parts on 43 nets, routed with 51 tracks and 0 vias.
It belongs with the ESP32 boards of this library.
This repository holds the KiCAD files for the Tidy Bowl Project
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Barrel_Jack | PJ-102A:CUI_PJ-102A | J1 |
| 1 | ESP32 Module | TTB KiCAD Footprints:ESP32_DEVKIT_V1_TYPE_C | B2 |
| 1 | Motor_Driver | TTB KiCAD Footprints:XY-160D Motor Driver | B3 |
| 1 | Mtr_Driver_Logic | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J3 |
| 1 | Mtr_Driver_Pwr | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | Pololu_Voltage_Regulator | TTB KiCAD Footprints:Pololu Voltage Regulator | B4 |
| 1 | Relay Control Module | TTB KiCAD Footprints:4 Relay Module | B1 |
| 1 | Relay_12V | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Relay_GND | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | Spare_Pwr_Header | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch


OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
It measures 201.2 × 86.7 mm and has 2 copper layers, 1.6 mm thick.
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the AHNox/TTB-KiCAD-FIles repository on GitHub, at the commit this page was made from: the board is TTB KiCAD FIles.kicad_pcb and its schematic TTB KiCAD FIles.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask AHNox before reusing the design.