2 layers50 × 35 mm
2 layers
PCB design
Ahmed29sameh/PCB-design- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 9
- Pads
- 26
- Tracks, vias
- 24, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 13 Oct 2025
- Updated
- 13 Oct 2025
Overview
PCB design is an open-source printed circuit board by Ahmed29sameh, from the Ahmed29sameh/PCB-design repository on GitHub. It is a 2-layer board with 17 parts on 9 nets, routed with 24 tracks and 0 vias.
Its parts include 6 resistors, 2 capacitors and 2 connectors.
README
README.mdPCB-design
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R4, R5, R6 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 10n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 2 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1, J2 |
The 14 most common of 17 parts.
Questions
What parts does the PCB design use?
17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCB design KiCad files?
From the Ahmed29sameh/PCB-design repository on GitHub, at the commit this page was made from: the board is PCB.kicad_pcb and its schematic Schematic.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCB design design in my own project?
Its repository states no licence, so its author keeps all rights: ask Ahmed29sameh before reusing the design.
Similar boards
- 2 layers139.7 × 62.2 mm
- 2 layers29.2 × 55.9 mm
Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
17 parts1kGPL-3.0 - 2 layers24.5 × 36.5 mm
- 2 layers56.3 × 55.7 mm
StarNecklace
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
17 parts915 - 2 layers25 × 25 mm
SmallEncoder
DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…
17 parts498MIT - 2 layers38.9 × 16.1 mm
- 2 layers36 × 51 mm
