
Moto gps rev a1
mx3353672833-debug/moto-gps-waveshare
MOTO GPS · Waveshare ESP32-S3 1.75C 圆屏导航 + iPhone App | Author: Maler X | Noncommercial, attribution required | Experimental

płytka pcb
Antena wifi is an open-source printed circuit board by AGH-Drone-Engineering, from the AGH-Drone-Engineering/IMAV-antenna-PCB repository on GitHub. It is a 2-layer board of 40.6 × 52.3 mm with 19 parts on 12 nets, routed with 178 tracks and 36 vias.
It is built around the 100SP3T1B1M2QEH and TPD2EUSB30DRTR. Its parts include 8 capacitors, 3 resistors, 2 switches, 1 diode and 1 connector. It belongs with the radio and wireless boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 2.2 uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2, C3, C4 |
| 2 | 100nf | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C7, C8 |
| 2 | 47 uF 16V | Capacitor_Tantalum_SMD:CP_EIA-6032-15_Kemet-U_HandSolder | C5, C6 |
| 2 | 5,1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 2 | Conn_01x01 | Connector_Wire:SolderWirePad_1x01_SMD_3x6mm | -, J1 |
| 1 | * | Antena-Wifi-dobre:BL-M8812EU2 | MOD-1 |
| 1 | 100SP3T1B1M2QEH | przycisk-antena-wifi:SW_500SSP1S2M2QEA | S1 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | LOGO | Antena-Wifi-dobre:znak_dron1 | G*** |
| 1 | Sw_Res | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW1 |
| 1 | TPD2EUSB30DRTR | tvs-usb:SOTFL35P100X50-3N | D2 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |

mx3353672833-debug/moto-gps-waveshare
MOTO GPS · Waveshare ESP32-S3 1.75C 圆屏导航 + iPhone App | Author: Maler X | Noncommercial, attribution required | Experimental

QuickLogic-Corp/quick-feather-dev-board
100% open source dev kit for EOS S3 MCU+eFPGA SoC supported by fully open source SDK and FPGA Toolchain

CopperPilot/copper-pilot-cli
CopperPilot in your terminal: a thin, open-source client for CopperPilot electronics design agent, the best AI for PCB Design.

antmicro/quickfeather-dev-board
This project contains open hardware design files for the QuickFeather development board based on the QuickLogic EOS S3 Sensor Processing Platform.

Teslafly/Moxie_drive_mini_drv
A motor drive based off https://github.com/vedderb/bldc-hardware using the drv8353 and toshiba fets


antmicro/gem-baseboard
This repository contains PCB design files for a demo board compatible with the GEM1 and GEM2 adapter boards.

Andreuxxx1977/esp32-p4
An open-hardware, actively cooled ESP32-P4 board for heavy multimedia work: a 2-lane MIPI camera, a 2-lane MIPI display, USB 2.0 High-Speed, 10/100 Ethernet, UHS-I microSD, 32 MB flash and 32 MB PSRAM.
It measures 40.6 × 52.3 mm and has 2 copper layers, 1.6 mm thick.
19 parts, built around the 100SP3T1B1M2QEH and TPD2EUSB30DRTR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the AGH-Drone-Engineering/IMAV-antenna-PCB repository on GitHub, at the commit this page was made from: the board is antena-wifi.kicad_pcb and its schematic antena-wifi.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask AGH-Drone-Engineering before reusing the design.