

- Size
- 80.5 × 80.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 65
- Nets
- 74
- Pads
- 203
- Tracks, vias
- 243, 343
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 29 Jun 2024
- Updated
- 1 Sep 2026
Overview
EPSV4 is an open-source printed circuit board by AfriOrbit, from the AfriOrbit/EduSat-Project repository on GitHub. It is a 2-layer board of 80.5 × 80.5 mm with 65 parts on 74 nets, routed with 243 tracks and 343 vias.
It is built around the AMS1117-3.3, DW06D and IP5306, with the IRLML6344TRPBF and SMBJ5.0A among its other parts. Its parts include 14 capacitors, 11 resistors, 11 diodes, 8 connectors and 6 ICs.
Main components
5AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsDW06D
SOT-23-6-40℃~+85℃ 1 1.5V~10V 2.4V 3.6A 3.8uA 4.3V Lithium Battery Not supported Protection IC SOT-23-6 Battery Management ROHSGOODWORKBattery ManagementIP5306
ESOP-80℃~+70℃ 1 100uA 2.1A 3V 4.2V 4.65V~5.5V Charging IC、Protection IC I2C Lithium Battery ESOP-8 Battery Management ROHSINJOINICBattery ManagementIRLML6344TRPBF
SOT-23-55℃~+150℃ 1 N-channel 1.1V 1.3W 29mΩ@4.5V 30V 46pF 5A 6.8nC 650pF SOT-23 MOSFETs ROHSInfineon TechnologiesMOSFETsSMBJ5.0A
DO-214AA(SMB)-65℃~+150℃ 5V 600W@10/1000us 65.3A@10/1000us 7V 800uA 9.2V TVS Unidirectional DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHSMDDESD And Surge Protection (TVS/ESD)
Parts
65| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R4, R9, R11, R13 |
| 5 | 22u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C7, C8, C9, C10 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3, D10, D11 |
| 2 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C12 |
| 2 | 1043 | 1043:BAT_1043 | BT1, BT2 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R10 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4 |
| 2 | 1n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C11 |
| 2 | ACS712xLCTR-05B | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U4 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7, J8 |
| 2 | DFLS130L-7 | DFLS130L-7:DIO_DFLS130L-7 | D1, D2 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 100% Green | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D8 |
| 1 | 10R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C13 |
| 1 | 12k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12 |
| 1 | 1uH | MCS0630-100MN1:INDPM7366X300N | L1 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C14 |
| 1 | 25% Red | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D5 |
| 1 | 2R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 50% Red | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D6 |
| 1 | 75% Red | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D7 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | Conn_02x20_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J5 |
| 1 | DW06D | DW06D:DW06D_SFE | IC1 |
| 1 | IP5306 | IP5306:SOIC9P127_490X600X170L84X42T330X241N | U2 |
| 1 | IRLML6344TRPBF | IRLML6344TRPBF:SOT95P240X112-3N | U3 |
| 1 | Power Switch | SS-12D10L3:SS12D10L3 | S3 |
| 1 | Push-Button | PTS647SM50SMTR2LFS:PTS647SM50SMTR2LFS | S2 |
| 1 | Release Detection | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | SMBJ5.0A | SMBJ5.0A:DIOM4336X265N | D4 |
| 1 | Solar_Panel_1 | Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J1 |
| 1 | Solar_Panel_2 | Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J2 |
| 1 | TP1_5V | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1 |
| 1 | TP2_3.3 | TestPoint:TestPoint_Pad_1.5x1.5mm | TP2 |
| 1 | TP3_BATT | TestPoint:TestPoint_Pad_1.5x1.5mm | TP3 |
| 1 | USB-Solar Toggle | SS-12D10L3:SS12D10L3 | S1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Wuerth_629105150521 | J3 |
| 1 | Yellow LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D9 |
More from AfriOrbit/EduSat-Project
11- 2 layers80.6 × 80.5 mm

- 2 layers80.5 × 80.5 mm

- 2 layers86.8 × 57.5 mm

- 4 layers80.5 × 80.5 mm

- 2 layers100 × 100 mm

- 4 layers80.5 × 80.5 mm

- 2 layers85.3 × 87.8 mm

- 2 layers85.4 × 87.9 mm

- 2 layers80.6 × 80.5 mm

- 4 layers80.5 × 80.5 mm

- 2 layers85.4 × 87.9 mm

Similar boards
- 2 layers49 × 25 mm

SlimeVR Tracker
CoreanXka/SlimeVR-Tracker
基于上述原因,诞生了这个项目,解决了上面的问题,并具有以下特点: - 超小尺寸,超高集成度,仅比开发板长1mm。 - 整合接口,仅用一个Type-C接口实现充电与程序下载。 - 集成最最最重要的电池保护芯片。 - 预留电池引脚接口和开关引脚接口,锂电池不再直连3.3V引脚,而是会先经过降压芯片降压后输出。 - 智能切换供电,在有外部USB供电的情况下会切断锂电池供电并进行充电,断开供电后自动使用锂电池供电。 -…
40 parts6GPL-3.0 - 4 layers56 × 114 mm

STM32 x RFM96 v2
collins-emasi/KiCAD-PROJECTS-PCB
In this repository, I will be sharing some of the project I'm working on with KiCAD software.
103 parts1 - 2 layers65.6 × 59.9 mm

- 2 layers54.7 × 74.3 mm

- 4 layers75.5 × 82.7 mm

IoT Edge Device V1
AfriOrbit/SDR-IOT-project
This project includes all work materials for the SDR and IOT communication systems.
99 parts - 2 layers97.7 × 29.9 mm

Line tracer v2
Anda2012/Open-line-tracer
ESP32-C3 Mini-1 + Massmore JET QTR-11D A fast and accurate MicroPython line follower using the ESP32-C3 Mini-1 and an 11-channel JET QTR-11D sensor.
38 partsMIT - 2 layers77.9 × 21.1 mm

- 2 layers70 × 70 mm

TannenbasisV4
broedschroed/NeoChristmasTreeV2
ESP32-powered Christmas tree ornament: 66x WS2812 LEDs on a 4-wing dual-PCB tree, IR remote with learnable sleep timer, browser-based pattern editor, LDR auto-brightness
69 partsMIT
Questions
How big is the EPSV4 PCB?
It measures 80.5 × 80.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the EPSV4 use?
65 parts, built around the AMS1117-3.3, DW06D, IP5306 and IRLML6344TRPBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EPSV4 KiCad files?
From the AfriOrbit/EduSat-Project repository on GitHub, at the commit this page was made from: the board is EduSat v3/EPSV4/EPSV4.kicad_pcb and its schematic EduSat v1/SensorBoardv2/SensorSchem.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the EPSV4 design in my own project?
Its repository states no licence, so its author keeps all rights: ask AfriOrbit before reusing the design.