

- Size
- 80.5 × 80.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 63
- Nets
- 74
- Pads
- 202
- Tracks, vias
- 129, 345
- Pours
- 20
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 29 Jun 2024
- Updated
- 1 Sep 2026
Overview
EPSv3 is an open-source printed circuit board by AfriOrbit, from the AfriOrbit/EduSat-Project repository on GitHub. It is a 2-layer board of 80.5 × 80.5 mm with 63 parts on 74 nets, routed with 129 tracks and 345 vias.
It is built around the AP63203WU, DW06D and IP5306, with the IRLML6344TRPBF among its other parts. Its parts include 16 capacitors, 13 resistors, 10 diodes, 6 ICs and 5 connectors.
Main components
4AP63203WU
TSOT-23-6-40℃~+85℃@(TA) 1 1.1MHz 22uA 2A 3.3V 3.8V~32V Buck Built-in Fixed Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting、Hiccup current limiting、EMI optimization (spread spectrum) Step-down type Yes TSOT-23-6 DC-DC Converters ROHSDiodes IncorporatedDC-DC ConvertersDW06D
SOT-23-6-40℃~+85℃ 1 1.5V~10V 2.4V 3.6A 3.8uA 4.3V Lithium Battery Not supported Protection IC SOT-23-6 Battery Management ROHSGOODWORKBattery ManagementIP5306
ESOP-80℃~+70℃ 1 100uA 2.1A 3V 4.2V 4.65V~5.5V Charging IC、Protection IC I2C Lithium Battery ESOP-8 Battery Management ROHSINJOINICBattery ManagementIRLML6344TRPBF
SOT-23-55℃~+150℃ 1 N-channel 1.1V 1.3W 29mΩ@4.5V 30V 46pF 5A 6.8nC 650pF SOT-23 MOSFETs ROHSInfineon TechnologiesMOSFETs
Parts
63| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 22u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C7, C8, C9, C10, C15, C16 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C13 |
| 3 | 1k5 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R4, R13 |
| 3 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3, D4, D10 |
| 2 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C12 |
| 2 | 100Ω | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R12 |
| 2 | 1043 | 1043:BAT_1043 | BT1, BT2 |
| 2 | 1n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C11 |
| 2 | 5k1 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6 |
| 2 | ACS712xLCTR-05B | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U4 |
| 2 | DFLS130L-7 | DFLS130L-7:DIO_DFLS130L-7 | D1, D2 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 0R5 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 100% Green | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D8 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C14 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 1 | 1kΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11 |
| 1 | 1uH | MCS0630-100MN1:INDPM7366X300N | L1 |
| 1 | 25% Red | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D5 |
| 1 | 2R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | 30k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 4.7uH | MCS0630-100MN1:INDPM7366X300N | L2 |
| 1 | 50% Red | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D6 |
| 1 | 75% Red | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D7 |
| 1 | 7k5 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | AP63203WU | Package_TO_SOT_SMD:TSOT-23-6 | U5 |
| 1 | Conn_02x20_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J5 |
| 1 | DW06D | DW06D:DW06D_SFE | IC1 |
| 1 | IP5306 | IP5306:SOIC9P127_490X600X170L84X42T330X241N | U2 |
| 1 | IRLML6344TRPBF | IRLML6344TRPBF:SOT95P240X112-3N | U3 |
| 1 | Power Switch | SS-12D10L3:SS12D10L3 | S3 |
| 1 | Push-Button | PTS647SM50SMTR2LFS:PTS647SM50SMTR2LFS | S2 |
| 1 | Release Detection | Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J4 |
| 1 | Solar_Panel_1 | Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J1 |
| 1 | Solar_Panel_2 | Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J2 |
| 1 | USB-Solar Toggle | SS-12D10L3:SS12D10L3 | S1 |
| 1 | USBPwrIn | Connector_USB:USB_C_Receptacle_GCT_USB4125-xx-x-0190_6P_TopMnt_Horizontal | J3 |
| 1 | Yellow LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D9 |
More from AfriOrbit/EduSat-Project
11- 2 layers80.6 × 80.5 mm

- 2 layers80.5 × 80.5 mm

- 2 layers86.8 × 57.5 mm

- 4 layers80.5 × 80.5 mm

- 2 layers100 × 100 mm

- 4 layers80.5 × 80.5 mm

- 2 layers85.3 × 87.8 mm

- 2 layers85.4 × 87.9 mm

- 2 layers80.6 × 80.5 mm

- 4 layers80.5 × 80.5 mm

- 2 layers85.4 × 87.9 mm

Similar boards
- 2 layers49 × 25 mm

SlimeVR Tracker
CoreanXka/SlimeVR-Tracker
基于上述原因,诞生了这个项目,解决了上面的问题,并具有以下特点: - 超小尺寸,超高集成度,仅比开发板长1mm。 - 整合接口,仅用一个Type-C接口实现充电与程序下载。 - 集成最最最重要的电池保护芯片。 - 预留电池引脚接口和开关引脚接口,锂电池不再直连3.3V引脚,而是会先经过降压芯片降压后输出。 - 智能切换供电,在有外部USB供电的情况下会切断锂电池供电并进行充电,断开供电后自动使用锂电池供电。 -…
40 parts6GPL-3.0 - 4 layers56 × 114 mm

STM32 x RFM96 v2
collins-emasi/KiCAD-PROJECTS-PCB
In this repository, I will be sharing some of the project I'm working on with KiCAD software.
103 parts1 - 2 layers65.6 × 59.9 mm

- 4 layers100 × 80 mm

- 2 layers95.3 × 161.9 mm

- 2 layers100.8 × 30.2 mm

Esp32 loraprs c3
sh123/esp32_loraprs
LoRa ESP32 KISS Bluetooth modem (for APRSDroid or aprs.fi iOS) + APRS-IS RX/TX iGate over WiFi + Digipeater + DV (with Codec2 Walkie-Talkie)
29 parts281GPL-3.0 - 2 layers87.9 × 98.7 mm

Bitdoglab smd
BitDogLab/BitDogLab
Open-source educational hardware for embedded systems, programming, electronics, and physical computing.
138 parts203 - 2 layers27.5 × 32 mm

Questions
How big is the EPSv3 PCB?
It measures 80.5 × 80.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the EPSv3 use?
63 parts, built around the AP63203WU, DW06D, IP5306 and IRLML6344TRPBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EPSv3 KiCad files?
From the AfriOrbit/EduSat-Project repository on GitHub, at the commit this page was made from: the board is EduSat v2/EPSv3/EPSv3.kicad_pcb and its schematic EduSat v1/SensorBoardv2/SensorSchem.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the EPSv3 design in my own project?
Its repository states no licence, so its author keeps all rights: ask AfriOrbit before reusing the design.