4 layers70 × 70 mm
4 layers200 × 160 mm
Launchpad controller v2
aesirkth/surtr-hardware1- Size
- 200 × 160 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 348
- Nets
- 396
- Pads
- 1,405
- Tracks, vias
- 2,158, 491
- Pours
- 1,757
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 4 Jan 2024
- Updated
- 13 May 2024
Overview
Launchpad controller v2 is an open-source printed circuit board by aesirkth, from the aesirkth/surtr-hardware repository on GitHub. It is a 4-layer board of 200 × 160 mm with 348 parts on 396 nets, routed with 2,158 tracks and 491 vias.
It is built around the TJA1462AT/0Z, AD4111BCPZ and BTS6143D, with the ARJM11A1-009-AB-EW2 among its other parts. Its parts include 110 capacitors, 104 resistors, 36 connectors, 33 ICs and 33 diodes. It belongs with the STM32 boards of this library.
Main components
4
TJA1462AT/0Z
SOIC-8-40℃~+150℃ 1 2uA 4.5V~5.5V 70mA 8Mbps CAN FD Transceiver Low-power mode、Wake-up function、TXD dominant timeout、ESD protection、Undervoltage Protection、Thermal shutdown protection、Integrated level shifting SOIC-8 CAN Transceivers ROHSNXP SemiconductorsCAN Transceivers
AD4111BCPZ
LFCSP-40(6x6)-40℃~+105℃ 1.25Hz、31.25kHz 24 2MHz、2MHz~2.048MHz 31.25kHz 3V~5.5V 4 5ppm/℃ 90uA Built-in Built-in External、Built-in SPI Sigma-Delta Yes LFCSP-40(6x6) Analog to Digital Converters (ADC) ROHSAnalog DevicesAnalog To Digital Converters (ADC)
BTS6143D
TO-252-4-40℃~+150℃ 1 10mΩ 33A 5.5V~38V Active Low High Side Switch Short-Circuit Protection(SCP)、Over Voltage Protection、Undervoltage Protection(UVP)、Overcurrent Protection(OCP)、Over Temperature Protection TO-252-4 Power Distribution Switches ROHSInfineon TechnologiesPower Distribution SwitchesARJM11A1-009-AB-EW2
插件-40℃~+85℃ 1 Gold Right Angle Shielded With LED 插件 Ethernet Connectors / Modular Connectors (RJ45 RJ11) ROHSAbraconEthernet Connectors / Modular Connectors (RJ45 RJ11)
Parts
348| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C11, C13, C14, C23, C26, C57, C58, C59, C60, C69, C70, C71, C74, C76, C77 +8 |
| 22 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R3, R5, R7, R39, R43, R46, R48, R50, R54, R55, R60, R65, R66, R103, R104 +6 |
| 20 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C6, C15, C16, C18, C19, C24, C25, C27, C53, C54, C56, C61, C62 +4 |
| 20 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13, R15, R31, R32, R38, R40, R41, R42, R44, R45, R47, R49, R51, R52, R53, R56 +4 |
| 18 | Conn_01x04 | Connector_JST:JST_GH_BM04B-GHS-TBT_1x04-1MP_P1.25mm_Vertical | J10, J11, J12, J13, J14, J16, J17, J18, J19, J20, J21, J22, J23, J25, J26, J29 +2 |
| 16 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R4, R6, R25, R26, R27, R28, R29, R30, R36, R37, R68, R70, R74, R81, R83 |
| 16 | 1nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C28, C29, C31, C32, C35, C36, C37, C38, C39, C42, C43, C44, C45, C46, C49, C52 |
| 11 | Conn_01x04 | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_4-G-5,08_1x04_P5.08mm_Horizontal | J3, J4, J5, J15, J24, J28, J32, J33, J34, J35, J36 |
| 10 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C20, C55, C87, C89, C92, C96, C101, C106, C109, C110 |
| 10 | 2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14, R17, R18, R21, R23, R69, R71, R75, R79, R84 |
| 10 | 5V | Package_TO_SOT_SMD:SOT-23_Handsoldering | D5, D7, D9, D10, D12, D25, D26, D28, D31, D33 |
| 8 | 10nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C88, C91, C93, C99, C100, C102, C105, C108 |
| 8 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C90, C94, C95, C97, C98, C103, C104, C107 |
| 8 | 1M | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R95, R96, R97, R98, R99, R100, R101, R102 |
| 8 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C30, C33, C34, C40, C41, C48, C50, C51 |
| 8 | 33V | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3, D24, D27, D29, D30, D32 |
| 8 | 825 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R19, R22, R24, R67, R72, R77, R78, R82 |
| 8 | 90 mA; 30 mA; 36V | Fuse:Fuse_0805_2012Metric_Pad1.15x1.40mm_HandSolder | F4, F5, F6, F7, F8, F9, F10, F11 |
| 8 | AD8495 | Package_SO:MSOP-8_3x3mm_P0.65mm | U14, U15, U16, U17, U18, U19, U20, U21 |
| 8 | BTS6143D | Package_TO_SOT_SMD:TO-252-4 | U2, U3, U4, U26, U27, U29, U30, U31 |
| 8 | SD36_SOD323 | Diode_SMD:D_SOD-323_HandSoldering | D13, D14, D15, D16, D17, D18, D20, D21 |
| 8 | Thermocouple_Alt | Connector_JST:JST_GH_BM02B-GHS-TBT_1x02-1MP_P1.25mm_Vertical | TC1, TC2, TC3, TC4, TC5, TC6, TC7, TC8 |
| 7 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C17, C21, C22, C47, C64, C75, C83 |
| 7 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4, D6, D8, D11, D19, D22, D23 |
| 6 | MountingHole_Pad | MountingHole:MountingHole_4.3mm_M4_Pad_Via | H1, H2, H3, H4, H5, H6 |
| 5 | 500 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11, R20, R33, R62, R63 |
| 4 | 49.9 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R91, R92, R93, R94 |
| 3 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8, J27, J31 |
| 3 | INA260 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U7, U13, U22 |
| 3 | Pololu 36v4 Breakout | custom_footprints:pololu | U9, U12, U23 |
| 2 | 0.47u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C12 |
| 2 | 120 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R64, R87 |
| 2 | 2.2u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C68, C73 |
| 2 | 275 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R10 |
| 2 | 33u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C10 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R34, R35 |
| 2 | 74LS06 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U6, U28 |
| 2 | 9p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C84, C86 |
| 2 | AD4111BCPZ | AD4111:AD4111BCPZ_ADI | U10, U11 |
| 2 | Conn_01x02 | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_2-G-5,08_1x02_P5.08mm_Horizontal | J1, J2 |
| 2 | FerriteBead | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | FB1, FB2 |
| 2 | Fuse | 3557:3557-2 | F1, F2 |
| 2 | SolderJumper_3_Open | Jumper:SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm | JP1, JP2 |
| 2 | TJA1462AT/0Z | TJA1462AT:SO8_SOT96-1_NXP | U24, U25 |
| 1 | 1.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16 |
| 1 | 1.5k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R89 |
| 1 | 1.75 A; 350 mA; 16V | Fuse:Fuse_0805_2012Metric_Pad1.15x1.40mm_HandSolder | F3 |
| 1 | 2.2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R90 |
| 1 | 2.4k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12 |
| 1 | 4.7u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C72 |
| 1 | 4.87k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R88 |
| 1 | 50MHz | Crystal:Crystal_SMD_EuroQuartz_X22-4Pin_2.5x2.0mm_HandSoldering | Y1 |
| 1 | ARJM11A1-009-AB-EW2 | ARJM11A1:ARJM11A1-009-AB-EW2_ABR | J6 |
| 1 | Conn_ST_STDC14 | Connector_PinHeader_1.27mm:PinHeader_2x07_P1.27mm_Vertical_SMD | J7 |
| 1 | DP83848KSQ/NOPB | DP83848:RTA40 | U32 |
| 1 | Generic Switching Reg | custom_footprints:generic_regulator | U1 |
| 1 | LM2940IMPX-12/NOPB | ul_LM2940IMPX-12-NOPB:DCY0004A_N | U8 |
| 1 | LM3940IMPX-3.3/NOPB | Package_TO_SOT_SMD:SOT-223 | U5 |
| 1 | STM32H723ZGTx | Package_QFP:LQFP-144_20x20mm_P0.5mm | U33 |
The 346 most common of 348 parts.
Questions
How big is the Launchpad controller v2 PCB?
It measures 200 × 160 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Launchpad controller v2 use?
348 parts, built around the TJA1462AT/0Z, AD4111BCPZ, BTS6143D and ARJM11A1-009-AB-EW2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Launchpad controller v2 KiCad files?
From the aesirkth/surtr-hardware repository on GitHub, at the commit this page was made from: the board is launchpad-controller-v2.kicad_pcb and its schematic adc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Launchpad controller v2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask aesirkth before reusing the design.
Similar boards
- 4 layers254.9 × 150.1 mm
- 2 layers91.4 × 87.6 mm
- 4 layers45 × 30 mm
01-SICk CANary
Milind220/Copper-Board-Lab
Copper Board Lab is a running collection of open-source PCB designs. Each board is designed in public, reviewed with Copper, fixed based on the findings, and published with schematics, layout, BOM, fabrication files…
37 parts4 - 4 layers74 × 90 mm
Bay node
kartben/hw-testing-rack
3D-printed, tilted test shelf for 16 dev boards: sliding drawers, per-bay ESP32-S3 running Zephyr (USB/IP, power switching, metering), KiCad PCBs, OpenSCAD parts, BOM and an interactive 3D viewer
135 parts - 2 layers
- 4 layers82.9 × 79 mm
24pin module
nathanfraske/CEC-Platform
ONE board file, kept current by the wave (owner directive 2026-07-25: "the current best should be placed into a candidate folder per board and kept current with only one board ideally so we have a reference").
49 partsApache-2.0 - 4 layers101 × 22 mm
