Skip to the content
2 layers80 × 58.6 mmFishflop, the printed circuit board in 3D

A simple PCB of a flip flop circuit for Hack Club Solder.

Size
80 × 58.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
17
Nets
8
Pads
35
Tracks, vias
65, 1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
26 May 2025
Updated
26 May 2025

Overview

Fishflop is an open-source printed circuit board by aeg5, from the aeg5/The-Fish-Flop repository on GitHub. It is a 2-layer board of 80 × 58.6 mm with 17 parts on 8 nets, routed with 65 tracks and 1 via.

Its parts include 8 resistors, 2 transistors, 2 switches and 1 diode.

README

README.md

The-Fish-Flop

This is a PCB for Hack Club Solder! It's a simple flip flop circuit that's fish shaped. The LED can be toggled with the set and reset buttons. My slack username is ag5.

Schematic

image

PCB

image image

BOM

  • 1 battery holder
  • 1 LED
  • 2 NPN transistors
  • 2 330 resistors
  • 2 1k resistors
  • 2 2k resistors
  • 2 100k resistors
  • 2 push buttons

Parts

17
QtyValueFootprintReferences
3LOGOLOGOG***, G***, G***
2100kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR7, R8
21kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3, R4
22N3904Package_TO_SOT_THT:TO-92L_HandSolderQ1, Q2
22kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR5, R6
2330Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2
2SW_PushButton_Switch_THT:SW_PUSH_6mmSW1, SW2
1Battery_CellBattery:BatteryHolder_Keystone_3034_1x20mmBT1
1LEDLED_THT:LED_D5.0mmD1

Similar boards

  • 2 layers50 × 35 mmServo power, the printed circuit board in 3D

    Servo power

    earthtojake/text-to-cad

    Design physical products with AI

    17 parts26kMIT
  • 2 layers139.7 × 62.2 mmBreakout 60pin EEC IV, the printed circuit board in 3D

    Breakout 60pin EEC IV

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    17 parts1.2k
  • 2 layers29.2 × 55.9 mmDeniseadapter, the printed circuit board in 3D

    Deniseadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    17 parts1kGPL-3.0
  • 2 layers24.5 × 36.5 mmCluster, the printed circuit board in 3D

    Cluster

    JesusFreke/lalboard

    A 3D-printed keyboard inspired by the DataHand

    17 parts993
  • 2 layers56.3 × 55.7 mmStarNecklace, the printed circuit board in 3D

    StarNecklace

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    17 parts915
  • 2 layers25 × 25 mmSmallEncoder, the printed circuit board in 3D

    SmallEncoder

    DDeGonge/OS-ARM

    This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…

    17 parts498MIT
  • 2 layers38.9 × 16.1 mmAmoeba spc, the printed circuit board in 3D

    Amoeba spc

    mtl/keyboard-pcbs

    Keyboard PCBs

    17 parts485
  • 2 layers36 × 51 mmABSIS ALE, the printed circuit board in 3D

    ABSIS ALE

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    17 parts431

Questions

How big is the Fishflop PCB?

It measures 80 × 58.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Fishflop use?

17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Fishflop KiCad files?

From the aeg5/The-Fish-Flop repository on GitHub, at the commit this page was made from: the board is src/fishflop.kicad_pcb and its schematic src/fishflop.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Fishflop design in my own project?

Its repository states no licence, so its author keeps all rights: ask aeg5 before reusing the design.