2 layers14 × 10 mm
TFPROBE01
ThunderFly-aerospace/TFPROBE01
Omnipolar magnetic and reflective optical probe.
8 parts1GPL-3.0
2 layers250 × 56 mm
Klock pcb
adriansalamon/clock-clock-241Moved to https://git.salamon.xyz/adrian/clock-clock-24
- Size
- 250 × 56 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 45
- Nets
- 86
- Pads
- 281
- Tracks, vias
- 801, 82
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 23 Mar 2023
- Updated
- 1 Dec 2024
Overview
Klock pcb is an open-source printed circuit board by adriansalamon, from the adriansalamon/clock-clock-24 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 250 × 56 mm with 45 parts on 86 nets, routed with 801 tracks and 82 vias.
It is built around the AH3572-P-B, 74AHC595D and DS3231S#, with the BSS138 among its other parts. Its parts include 17 ICs, 13 capacitors, 4 resistors, 3 connectors and 2 transistors. It belongs with the lEDs and displays boards and the ESP32, AVR (ATmega, ATtiny) and RISC-V boards of this library.
Main components
4
AH3572-P-B
SIP-3-40℃~+125℃ 3V~28V 3mA 800kHz Omnipolar Open-drain ±2Gs ±3mT SIP-3 Hall Switches ROHSDiodes IncorporatedHall Switches
74AHC595D
SOIC-16-40℃~+125℃ 1 170MHz 2V~5.5V 74AHC 8 8mA Serial-to-Serial or Parallel Tri-State SOIC-16 Shift Registers ROHSNexperiaShift Registers
DS3231S#
RTC, I²C, ±3.5ppm, SOIC16Maxim Integrated (Analog Devices)Uncategorised
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
README
README.mdMy own ClockClock 24 replica
My own take/version of the ClockClock 24 by Humans Since 1982 - A digital clock made from 24 analog clocks. All credit goes to them for coming up with such an awesome design.
My version is made 100% from scratch using my own hardware design. Mine is also slightly smaller, made to fit perfectly on my shelf. This design uses 6 Arduino nanos, each in control of 4 individual clocks, and an ESP32 which orchestrates and sends commands to all Arduinos.
The physical clock is made from MDF, which was routed using a 3d printed jig (I don't own a CNC). That process will not be published.
The software is still WIP and not finished.
Parts
45| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12 |
| 8 | AH3572 | Adrian_library:AH3572-SOT-23 | U1, U2, U3, U4, U5, U6, U7, U8 |
| 4 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 4 | VID28-XX | Adrian_library:VID28-XX_DownMount | U9, U11, U12, U14 |
| 2 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | Conn_01x04 | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J1, J2 |
| 2 | MS_X12.017 | Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm | U10, U13 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13 |
| 1 | 1220 | Battery:BatteryHolder_Keystone_3001_1x12mm | BT1 |
| 1 | 74AHC595 | Package_DIP:DIP-16_W7.62mm | U15 |
| 1 | Arduino_Nano_Every | Module:Arduino_Nano | A1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | DS3231 | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U16 |
| 1 | MOUDLE-SEEEDUINO-XIAO-ESP32C3 | seeduino:seeduino-MOUDLE14P-THT | U18 |
Questions
How big is the Klock pcb PCB?
It measures 250 × 56 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Klock pcb use?
45 parts, built around the AH3572-P-B, 74AHC595D, DS3231S# and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Klock pcb KiCad files?
From the adriansalamon/clock-clock-24 repository on GitHub, at the commit this page was made from: the board is hardware/klock_pcb.kicad_pcb and its schematic hardware/klock_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Klock pcb design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers147.3 × 95.3 mm
Nixie proj conflict-20171112-163801
dm2lct/tlnixie
PCB files for the Turmlabor nixie clock 2.0
117 parts11GPL-3.0 - 2 layers
- 2 layers151 × 114.1 mm
- 2 layers76.2 × 76.2 mm
- 2 layers112.7 × 110.8 mm
- 4 layers100 × 54 mm
32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
64 parts766 - 4 layers100 × 100 mm
Flexible audio hub
andrew-bolin/flexible_audio_hub
My ears and speakers will last a lifetime (I hope), but home theatre audio standards do not. My old stereo amplifier works fine, why can't I get an HDMI upgrade module that gives it CEC (control via TV remote).
91 parts8