

Rotary encoder
An internet radio written in rust
- Size
- 25.1 × 25.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 11
- Pads
- 30
- Tracks, vias
- 6, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 19 Jan 2025
- Updated
- 26 Jun 2026
Overview
Rotary encoder is an open-source printed circuit board by adoble, from the adoble/rusty-radio repository on GitHub, published under the MIT licence. It is a 2-layer board of 25.1 × 25.4 mm with 13 parts on 11 nets, routed with 6 tracks and 0 vias.
Its parts include 9 resistors, 2 capacitors and 2 connectors. It belongs with the radio and wireless boards of this library.
README
README.mdRusty Radio
An embedded internet radio written in Rust.
⚠️ Work In Progress
This project is under active development. Features, hardware, and software may change frequently.
Supported Formats
Rusty Radio currently supports:
- MP3
- AAC
- M3U
System Diagram
Hardware
- For the radio uses the Seeed Studio XIAO ESP32C-C3 for its external antenna, making the radio independent of the enclosure.
- For the user interface (display, tuning knob and preset buttons) uses another XIAO ESP32-C3 which communicates over an UART interface with the radio processor. This approach was chosen as using C3 (or for that matter, a S3) for both the radio and the display led to memory issues.
- Uses the VS1053 chip to decode the streamed audio.
- Schematics are created using KiCad 9.0.
Software Architecture
- Built with
esp-haland Embassy for async task scheduling. - Project scaffolded using
cargo generate esp-rs/esp-template. See the GitHub repo. The software project root iscontroller.
Development Notes
- Embassy code examples are referenced from esp-hal examples.
- For more on Embassy, see the Embassy Book.
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100K | Resistor_SMD:R_0805_2012Metric | R3, R4, R5, R6, R7, R8, R9 |
| 2 | 10n | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
More from adoble/rusty-radio
1- 2 layers53.3 × 91.4 mm

Similar boards
- 2 layers40 × 20 mm

- 2 layers74.9 × 49.5 mm

- 2 layers35 × 29 mm

MagSpoofTC
samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.
13 parts4.2k - 2 layers20.6 × 23.6 mm

AO-03 signal amplifier
fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments
13 parts1.6kApache-2.0 - 2 layers47 × 35.6 mm

- 2 layers95 × 95 mm

Cube batteryboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
13 parts1.1kGPL-3.0 - 2 layers15.2 × 20.3 mm

Pt100stick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
13 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm

Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
13 parts1kGPL-3.0
Questions
How big is the Rotary encoder PCB?
It measures 25.1 × 25.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rotary encoder use?
13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rotary encoder KiCad files?
From the adoble/rusty-radio repository on GitHub, at the commit this page was made from: the board is hardware/rotary-encoder/rotary-encoder.kicad_pcb and its schematic hardware/button-board/button_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rotary encoder design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).