Skip to the content
2 layers12.8 × 19.7 mmSpring expander, the printed circuit board in 3D

Spring expander

adeboni/eurorack1

This repository stores various eurorack module designs I've made

Size
12.8 × 19.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
2
Nets
3
Pads
8
Tracks, vias
6, 0
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
26 Jun 2019
Updated
8 Jan 2026

Overview

Spring expander is an open-source printed circuit board by adeboni, from the adeboni/eurorack repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 12.8 × 19.7 mm with 2 parts on 3 nets, routed with 6 tracks and 0 vias.

It belongs with the audio and music boards of this library.

README

README.md

This repository stores various eurorack module designs I've made.

  • BT Module: Allows you to pair your phone or computer and outputs stereo audio
  • Dodecamodulator: 12 individually configurable LFOs through an onboard UI or through Bluetooth
  • Geiger Clock Module: Uses a Geiger–Müller tube to generate pulses
  • Google Assistant Module: A Google Home Mini in a eurorack form-factor
  • Neopixel Controller Module: Can control neopixel rainbow cycle speed, brightness, and VU-meter-style amplitude with CV
  • CS:GO Game State Integration Server: Receives events from CS:GO and enables gate outputs based on game states
  • Safety Valve: Update of the GSMN Safety Safety Valve module with a trimmer to remove op-amp offset and added a socket for the tube
  • ECG: Outputs a waveform from ECG electrodes plus a gate output with threshold adjustment

Parts

2
QtyValueFootprintReferences
1Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_HorizontalJ1
1R_Potentiometer_USPotentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_VerticalRV1

More from adeboni/eurorack

12
  • 2 layers128 × 129 mmNoise toaster, the printed circuit board in 3D

    Noise toaster

    adeboni/eurorack

    This repository stores various eurorack module designs I've made

    133 parts1GPL-3.0
  • 2 layers30 × 109 mmLaser controller, the printed circuit board in 3D

    Laser controller

    adeboni/eurorack

    This repository stores various eurorack module designs I've made

    124 parts1GPL-3.0
  • 4 layers60.6 × 100 mmTheremin, the printed circuit board in 3D

    Theremin

    adeboni/eurorack

    This repository stores various eurorack module designs I've made

    110 parts1GPL-3.0
  • 2 layers40.3 × 100 mmDodecamodulator, the printed circuit board in 3D

    Dodecamodulator

    adeboni/eurorack

    This repository stores various eurorack module designs I've made

    109 parts1GPL-3.0
  • 2 layers50.5 × 100 mmTegra carrier, the printed circuit board in 3D

    Tegra carrier

    adeboni/eurorack

    This repository stores various eurorack module designs I've made

    100 parts1GPL-3.0
  • 2 layers50.5 × 100 mmTegra projectm front, the printed circuit board in 3D

    Tegra projectm front

    adeboni/eurorack

    This repository stores various eurorack module designs I've made

    73 parts1GPL-3.0
  • 2 layers185 × 144 mmMega 12v pwr, the printed circuit board in 3D

    Mega 12v pwr

    adeboni/eurorack

    This repository stores various eurorack module designs I've made

    67 parts1GPL-3.0
  • 2 layers75 × 100 mmProjectm eurorack, the printed circuit board in 3D

    Projectm eurorack

    adeboni/eurorack

    This repository stores various eurorack module designs I've made

    60 parts1GPL-3.0
  • 2 layers20 × 100 mmWand receiver, the printed circuit board in 3D

    Wand receiver

    adeboni/eurorack

    This repository stores various eurorack module designs I've made

    52 parts1GPL-3.0
  • 2 layers10 × 108 mmBt module, the printed circuit board in 3D

    Bt module

    adeboni/eurorack

    This repository stores various eurorack module designs I've made

    47 parts1GPL-3.0
  • 2 layers10 × 100 mmEcg, the printed circuit board in 3D

    Ecg

    adeboni/eurorack

    This repository stores various eurorack module designs I've made

    41 parts1GPL-3.0
  • 2 layers420 × 40 mmPower bus, the printed circuit board in 3D

    Power bus

    adeboni/eurorack

    This repository stores various eurorack module designs I've made

    34 parts1GPL-3.0

Similar boards

  • 2 layers37 × 19 mmPassive rpi hub75-adapter, the printed circuit board in 3D

    Passive rpi hub75-adapter

    hzeller/rpi-rgb-led-matrix

    Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

    2 parts4.4kGPL-2.0
  • 2 layersDiode template, the printed circuit board in 3D

    Diode template

    adamws/kicad-kbplacer

    KiCad plugin for automatic keyboard's key placement and routing

    2 parts547GPL-3.0
  • 2 layers20.3 × 15.2 mmL0 button, the printed circuit board in 3D

    L0 button

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    2 parts546MIT
  • 2 layers35.1 × 46.8 mmSDEX2M2 Breakout Board, the printed circuit board in 3D

    SDEX2M2 Breakout Board

    NVNTLabs/switch2-SDEX2M2

    Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

    2 parts542GPL-3.0
  • 2 layers59.3 × 36.6 mmExpansionBoardTemplate, the printed circuit board in 3D

    ExpansionBoardTemplate

    BlueSCSI/BlueSCSI-v2

    BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

    2 parts459GPL-3.0
  • 2 layersAlpha.9mm.wire, the printed circuit board in 3D

    Alpha.9mm.wire

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    2 parts410
  • 2 layers26.7 × 64 mmGpu power, the printed circuit board in 3D

    Gpu power

    dennisss/dacha

    Monorepo for awesome tools/projects/libraries

    2 parts397Apache-2.0

Questions

How big is the Spring expander PCB?

It measures 12.8 × 19.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Spring expander use?

2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Spring expander KiCad files?

From the adeboni/eurorack repository on GitHub, at the commit this page was made from: the board is spring_expander/spring_expander/spring_expander.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Spring expander design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).