Skip to the content
2 layers10 × 108 mmBt module, the printed circuit board in 3D

This repository stores various eurorack module designs I've made

Size
10 × 108 mm
Copper layers
2
Thickness
1.6 mm
Parts
47
Nets
44
Pads
143
Tracks, vias
324, 30
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
26 Jun 2019
Updated
8 Jan 2026

Overview

Bt module is an open-source printed circuit board by adeboni, from the adeboni/eurorack repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 10 × 108 mm with 47 parts on 44 nets, routed with 324 tracks and 30 vias.

It is built around the TL072, LM1117-5.0 and SM4007. Its parts include 15 resistors, 14 capacitors, 4 diodes, 4 switches and 3 ICs. It belongs with the audio and music boards of this library.

Main components

3

README

README.md

This repository stores various eurorack module designs I've made.

  • BT Module: Allows you to pair your phone or computer and outputs stereo audio
  • Dodecamodulator: 12 individually configurable LFOs through an onboard UI or through Bluetooth
  • Geiger Clock Module: Uses a Geiger–Müller tube to generate pulses
  • Google Assistant Module: A Google Home Mini in a eurorack form-factor
  • Neopixel Controller Module: Can control neopixel rainbow cycle speed, brightness, and VU-meter-style amplitude with CV
  • CS:GO Game State Integration Server: Receives events from CS:GO and enables gate outputs based on game states
  • Safety Valve: Update of the GSMN Safety Safety Valve module with a trimmer to remove op-amp offset and added a socket for the tube
  • ECG: Outputs a waveform from ECG electrodes plus a gate output with threshold adjustment

Parts

47
QtyValueFootprintReferences
710kResistor_SMD:R_0603_1608MetricR2, R3, R6, R7, R9, R10, R11
71uCapacitor_SMD:C_0603_1608MetricC8, C9, C10, C11, C12, C13, C14
410uCapacitor_SMD:C_0603_1608MetricC1, C2, C3, C4
4SW_PushButton_Switch_THT:SW_PUSH_6mmSW1, SW2, SW3, SW4
3SM4007Diode_SMD:D_SOD-123D1, D2, D3
20.1uCapacitor_SMD:C_0603_1608MetricC5, C6
2220Resistor_SMD:R_0603_1608MetricR1, R5
230kResistor_SMD:R_0603_1608MetricR4, R8
2JACK_OUTConnector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHolesJ2, J3
11kResistor_SMD:R_0603_1608MetricR14
11nCapacitor_SMD:C_0603_1608MetricC7
133kResistor_SMD:R_0603_1608MetricR13
151kResistor_SMD:R_0603_1608MetricR12
1600 ohmInductor_SMD:L_0603_1608MetricL1
19.1kResistor_SMD:R_0603_1608MetricR15
1Antenna_ShieldRF_Antenna:Texas_SWRA117D_2.4GHz_RightAE1
1Conn_02x05_Odd_Even4ms_Connector:Pins_2x05_2.54mm_TH_EuropowerJ1
1Crystal_GND24Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mmY1
1LEDLED_THT:LED_D3.0mmD4
1LM1117-5.0Package_TO_SOT_SMD:SOT-223-3_TabPin2U1
1MH-M18Package_SO:QSOP-24_3.9x8.7mm_P0.635mmU3
1MountingHoleMountingHole:MountingHole_2.2mm_M2H1
1TL072Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU2

More from adeboni/eurorack

12
  • 2 layers128 × 129 mmNoise toaster, the printed circuit board in 3D

    Noise toaster

    adeboni/eurorack

    This repository stores various eurorack module designs I've made

    133 parts1GPL-3.0
  • 2 layers30 × 109 mmLaser controller, the printed circuit board in 3D

    Laser controller

    adeboni/eurorack

    This repository stores various eurorack module designs I've made

    124 parts1GPL-3.0
  • 4 layers60.6 × 100 mmTheremin, the printed circuit board in 3D

    Theremin

    adeboni/eurorack

    This repository stores various eurorack module designs I've made

    110 parts1GPL-3.0
  • 2 layers40.3 × 100 mmDodecamodulator, the printed circuit board in 3D

    Dodecamodulator

    adeboni/eurorack

    This repository stores various eurorack module designs I've made

    109 parts1GPL-3.0
  • 2 layers50.5 × 100 mmTegra carrier, the printed circuit board in 3D

    Tegra carrier

    adeboni/eurorack

    This repository stores various eurorack module designs I've made

    100 parts1GPL-3.0
  • 2 layers50.5 × 100 mmTegra projectm front, the printed circuit board in 3D

    Tegra projectm front

    adeboni/eurorack

    This repository stores various eurorack module designs I've made

    73 parts1GPL-3.0
  • 2 layers185 × 144 mmMega 12v pwr, the printed circuit board in 3D

    Mega 12v pwr

    adeboni/eurorack

    This repository stores various eurorack module designs I've made

    67 parts1GPL-3.0
  • 2 layers75 × 100 mmProjectm eurorack, the printed circuit board in 3D

    Projectm eurorack

    adeboni/eurorack

    This repository stores various eurorack module designs I've made

    60 parts1GPL-3.0
  • 2 layers20 × 100 mmWand receiver, the printed circuit board in 3D

    Wand receiver

    adeboni/eurorack

    This repository stores various eurorack module designs I've made

    52 parts1GPL-3.0
  • 2 layers10 × 100 mmEcg, the printed circuit board in 3D

    Ecg

    adeboni/eurorack

    This repository stores various eurorack module designs I've made

    41 parts1GPL-3.0
  • 2 layers420 × 40 mmPower bus, the printed circuit board in 3D

    Power bus

    adeboni/eurorack

    This repository stores various eurorack module designs I've made

    34 parts1GPL-3.0
  • 2 layers40.3 × 100 mmKeystep expander module, the printed circuit board in 3D

    Keystep expander module

    adeboni/eurorack

    This repository stores various eurorack module designs I've made

    24 parts1GPL-3.0

Similar boards

  • 2 layers10 × 104 mmAnalog to pwm, the printed circuit board in 3D

    Analog to pwm

    adeboni/laser-projector

    This project is for a quadruple laser projection controller, aimed at supporting room-scale projections

    51 partsGPL-3.0
  • 2 layers100 × 62 mmLooper, the printed circuit board in 3D

    Looper

    adeboni/electronics

    This repository stores code for various electronics projects I've made

    63 parts
  • 4 layers50.5 × 100 mmSynth, the printed circuit board in 3D

    Synth

    adeboni/math-camp-synth

    Burning Man Math Camp Synthesizers

    114 partsGPL-3.0
  • 2 layers109.4 × 108.5 mmQUAAD V1 1, the printed circuit board in 3D

    QUAAD V1 1

    mzourack/QUAAD

    quad 4-step Eurorack CV sequencer

    191 parts45
  • 4 layers154.9 × 128.4 mmDaisy hardware v1, the printed circuit board in 3D

    Daisy hardware v1

    rafkhan/lowstepper

    Dual phase manipulation low frequency oscillator by Okay Synthesizer.

    161 parts9
  • 2 layers38 × 100 mmPipistrelle, the printed circuit board in 3D

    Pipistrelle

    threedaymonk/pipistrelle

    Multi-function Seeeduino XIAO based Eurorack module

    69 parts9
  • 2 layers80.8 × 99.9 mmCircuit board, the printed circuit board in 3D

    Circuit board

    ltrooney/diy-synth

    A repository containing a handful of utilities for my DIY Eurorack-based modular synthesizer. Snippets include a virtual wavetable oscillator, a step sequencer, and more.

    71 parts7

Questions

How big is the Bt module PCB?

It measures 10 × 108 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Bt module use?

47 parts, built around the TL072, LM1117-5.0 and SM4007. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Bt module KiCad files?

From the adeboni/eurorack repository on GitHub, at the commit this page was made from: the board is bt_module/bt_module.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Bt module design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).