4 layers39 × 40 mm
2 layers66 × 55.9 mm
Nightlight
adb-sh/nightlight2a little wled 5x5 matrix with an esp8266
- Size
- 66 × 55.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 59
- Nets
- 55
- Pads
- 197
- Tracks, vias
- 247, 15
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 23 Mar 2024
- Updated
- 10 Apr 2024
Overview
Nightlight is an open-source printed circuit board by adb-sh, from the adb-sh/nightlight repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 66 × 55.9 mm with 59 parts on 55 nets, routed with 247 tracks and 15 vias.
It is built around the ESP-12F, AMS1117-3.3 and USB-TYPE-C-009, with the WS2812B, SKRTLAE010 and BSS138 among its other parts. Its parts include 25 diodes, 10 resistors, 5 capacitors, 4 switches and 3 ICs. It belongs with the ESP8266 boards of this library.
Main components
6
ESP-12F
SMD,24x16mm-40℃~+85℃ -96dBm 15dBm 2.4GHz 3.3V 375mA 55mA PCB UART WIFI4 SMD,24x16mm WiFi Modules ROHSDOITWiFi Modules
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
USB-TYPE-C-009
SMD-25℃~+85℃ 1 10000 times 5A 5V 6.8mm 6P Female Surface Mount, Right Angle Type-C SMD USB Connectors ROHSDEALONUSB Connectors
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
SKRTLAE010
SMD,4.5x3.4mm-40℃~+90℃ 1.63N 100,000 cycles 12V 3.3mm 3.4mm 4.5mm 50mA Round Button SMD(SMT) Tab SPST-NO Surface Mount, Right Angle SMD,4.5x3.4mm Tactile Switches ROHSALPSALPINETactile Switches
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
README
README.mdnightlight
a little wled 5x5 led matrix
- esp8266
- 5x5 ws2812b leds
contribute
feel free to fork and open pull requests :D
Parts
59| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +9 |
| 10 | R | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10 |
| 6 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP3, TP4, TP5, TP6 |
| 3 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C4 |
| 2 | SKRTLAE010 | nightlight:KEY-SMD_SKRTLAE010 | SW1, SW2 |
| 2 | SW_Push | nightlight:SW-SMD_L3.9-W3.0-P4.45 | SW3, SW4 |
| 1 | 100uF | Capacitor_SMD:C_1210_3225Metric | C5 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | ESP-12F | RF_Module:ESP-12E | U1 |
| 1 | LOGO | LOGO | G*** |
| 1 | USB-TYPE-C-009 | nightlight:TYPE-C-SMD_TYPE-C-6P | U2 |
The 55 most common of 59 parts.
Questions
How big is the Nightlight PCB?
It measures 66 × 55.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Nightlight use?
59 parts, built around the ESP-12F, AMS1117-3.3, USB-TYPE-C-009 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nightlight KiCad files?
From the adb-sh/nightlight repository on GitHub, at the commit this page was made from: the board is nightlight.kicad_pcb and its schematic nightlight.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nightlight design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers30 × 34.6 mm
Keyboard QFAA
anhenaobe/nrf52840-modular-wireless-som
Reusable four-layer nRF52840 wireless SoM with BLE, USB-C, LiPo charging, buck-boost power management, RF antenna integration, and manufacturing-ready outputs.
66 partsGPL-3.0 - 2 layers24 × 57.8 mm
Weather station
mec-kon/weather_station
A simple weather station hardware (pcb files) for recording temperature, humidity, pressure and airquality.
73 parts3GPL-3.0 - 2 layers440 × 150 mm
- 2 layers27.5 × 24.8 mm
- 2 layers0.6 × 27.9 mm
- 2 layers38 × 56 mm
- 2 layers50 × 50 mm
Rfid uhf wifi reader
OpenLaundry/wifi-rfid-uhf-reader
Portable long range RFID uhf reader with WIFI based on esp32
23 parts8