
Passive rpi hub75-adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

Simple Addon for testing LED strips
Flipper led strip tester is an open-source printed circuit board by adamjvr, from the adamjvr/flipper-zero-LED-strip-tester repository on GitHub. It is a 2-layer board of 66 × 30.5 mm with 2 parts on 16 nets, routed with 33 tracks and 0 vias.
It belongs with the lEDs and displays boards of this library.
Simple Addon for testing LED strips
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | FlipperZero | lomalkin_kicad_footprints:FlipperZero | U1, U2 |

hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO


adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

It measures 66 × 30.5 mm and has 2 copper layers, 1.6 mm thick.
2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the adamjvr/flipper-zero-LED-strip-tester repository on GitHub, at the commit this page was made from: the board is flipper-led-strip-tester/flipper-led-strip-tester.kicad_pcb and its schematic flipper-led-strip-tester/flipper-led-strip-tester.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask adamjvr before reusing the design.