

Hackapet v4
wip, hackapet pcb v4
- Size
- 56.8 × 66.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 40
- Nets
- 57
- Pads
- 202
- Tracks, vias
- 406, 87
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 8 Jan 2026
- Updated
- 26 Jan 2026
Overview
Hackapet v4 is an open-source printed circuit board by acornitum, from the acornitum/hackapet-v4 repository on GitHub. It is a 2-layer board of 56.8 × 66.2 mm with 40 parts on 57 nets, routed with 406 tracks and 87 vias.
It is built around the ESP32-S2-MINI-2-N4 and S-LMBR340FT1G. Its parts include 7 resistors, 7 diodes, 6 capacitors, 6 connectors and 6 switches. It belongs with the ESP32 boards of this library.
Main components
2ESP32-S2-MINI-2-N4
SMD-40℃~+105℃ -97dBm 19.5dBm 2.4GHz 310mA 3V~3.6V 63mA ESP32-S2FH4 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD WiFi Modules ROHSEspressif SystemsWiFi ModulesS-LMBR340FT1G
SOD-123FL3A 40V 500mV@3A 500uA@40V 80A Independent SOD-123FL Schottky Diodes ROHSLeshan Radio (LRC)Schottky Diodes
README
README.mdhackapet pcb, v4
this is a wip!! it is not done yet
Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1K | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R6 |
| 4 | LED | LED_SMD:LED_0805_2012Metric | D3, D4, D5, D7 |
| 3 | S-LMBR340FT1G | Diode_SMD:D_0805_2012Metric | D1, D2, D6 |
| 3 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW1, SW2, SW3 |
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1, C5 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C2, C9 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R4, R5 |
| 2 | Conn_01x01_Socket | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J5, J6 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW5, SW6 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | Conn_01x07_Socket | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J1 |
| 1 | Conn_02x06_Counter_Clockwise | Connector_PinSocket_2.54mm:PinSocket_2x06_P2.54mm_Vertical | J7 |
| 1 | ESP-PSRAM32 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | ESP32-S2-MINI-2 | ESP32-S2-MINI-1:XCVR_ESP32-S2-MINI-1 | U3 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_DPDT_CK_JS202011JCQN | SW4 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J4 |
| 1 | XC6206PxxxMR | Package_TO_SOT_SMD:SOT-23-3 | U1 |
| 1 | battery_holder | Battery:1022_batteryholder | J3 |
The 35 most common of 40 parts.
More from acornitum/hackapet-v4
1- 2 layers56.8 × 66.2 mm

Similar boards
- 4 layers65 × 30 mm

Soleil
protolux-electronics/soleil_hardware
Hardware design files for Soleil, an open source power management and sleep control board for Raspberry Pi
81 parts22CERN-OHL-P-2.0 - 2 layers62.6 × 20.9 mm

- 6 layers16 × 35 mm

- 4 layers96 × 60 mm

- 2 layers70 × 19 mm

Hackducky v1
hackclub/hackducky
The hackclub themed USB rubber ducky ! - Check out hackducky
45 parts33 - 4 layers39 × 40 mm

- 2 layers134.4 × 99.6 mm

Line sensor
Potato-eater/Legacy2026
github repo for Robocup Junior Australia lightweight soccer team
79 parts2 - 2 layers70 × 65 mm

Zenalert node
priyanshubishtme/zen-alert
Custom 2-layer PCB designed in KiCad for the ZenAlert environmental monitoring and early-warning node.
10 parts1
Questions
How big is the Hackapet v4 PCB?
It measures 56.8 × 66.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hackapet v4 use?
40 parts, built around the ESP32-S2-MINI-2-N4 and S-LMBR340FT1G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hackapet v4 KiCad files?
From the acornitum/hackapet-v4 repository on GitHub, at the commit this page was made from: the board is hackapet_v2-backups/hackapet_v2-2025-03-05_183351 2/hackapet_v4.kicad_pcb and its schematic hackapet_v2-backups/hackapet_v2-2025-03-05_183351 2/hackapet_v4.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hackapet v4 design in my own project?
Its repository states no licence, so its author keeps all rights: ask acornitum before reusing the design.