
VAL3000
Valar-Systems/valar-motion
The easiest, fastest, cheapest, and safest way to spin a stepper motor wirelessly. Valar Motion is a family of tiny Wi-Fi stepper controllers built around a Trinamic TMC2209 driver — precisely control a motor's…

Documentation of the Wiring Harness and Data Acquisition Devices for the Bucknell Baja Car
Diff2rev4 is an open-source printed circuit board by ACherniske, from the ACherniske/E-C-Subteam-Bucknell-Baja repository on GitHub, published under the MIT licence. It is a 2-layer board of 53 × 40.9 mm with 42 parts on 75 nets, routed with 435 tracks and 65 vias.
It is built around the ATMEGA32U4-MU, DRV8904QPWPRQ1 and OSTVN02A150, with the FSM1LPATR and C5S-24.000-20-3030-X-R among its other parts. Its parts include 11 capacitors, 6 resistors, 3 ICs, 2 connectors and 2 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Wiring Harness, Controls, and Data Aquisition work for Bucknell Baja Electronics and Controls Subteam
Baja SAE is a globally recognized engineering competition hosted by SAE International, where university teams design, build, and test single-seat, off-road vehicles. These vehicles must endure rugged terrain and demonstrate capabilities in traction, stability, endurance, and maneuverability.
The Baja SAE competition emphasizes practical engineering skills, teamwork, and project management as students navigate the real-world challenges of designing, manufacturing, and testing a functional, durable vehicle. Participants engage in all stages of vehicle development, from concept to fabrication, while adhering to competition guidelines and safety requirements.
Teams compete in various events, including acceleration, hill climbs, and a grueling endurance race that tests the vehicle’s reliability over long distances. The competition allows engineering students to apply and expand their knowledge in areas like mechanical design, electronics, and control systems—developing crucial skills for their future careers.
This documentation provides an overview of the Electronics and Controls systems implemented in our Baja SAE vehicle, in accordance with relevant sections of the Baja SAE 2024 rulebook. The systems described here prioritize safety, reliability, and regulatory compliance, ensuring that all electronic and control functionalities meet competition standards. Our scope specifically includes the following components:
Electrical System (B.10): The vehicle includes a minimum electrical setup as required by rule B.10, encompassing dual engine kill switches, a brake light, and a main battery for system power. All safety and signaling systems are designed to function independently of the kill switches to maintain continuous operation during vehicle shutdowns.
Battery Requirements (B.10.1.1):
Wiring and Connectors (B.10.2): All wiring is routed to avoid high-temperature or high-wear areas, supporting accessibility and maintaining safety per B.10.2. Wiring pathways are designed to prevent interference with driver egress and other critical components.
Kill Switches (B.10.3): In compliance with B.10.3, the vehicle has two kill switches for engine cutoff—one within the driver’s reach in the cockpit and an external one accessible for track workers. Both are firmly mounted and ensure instant engine shutdown during emergency stops.
Signaling Devices (B.10.4):
Data Acquisition (B.10.6): The vehicle is equipped with optional data acquisition systems to log performance metrics. These systems do not relay real-time feedback to the driver, and all associated costs are included in the official competition cost report.
This document will evolve as we continue refining the Electronics and Controls subsystems to ensure both safety and competitive performance within Baja SAE specifications.
-Front and Rear Diff Wiring (in testing) -DAQ Breakout Board (delayed)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | OSTVN02A150 | custom:CONN_OSTVN02A150_OST | Switches_In1, Switches_Out1, Terminal_1Out1, Terminal_2Out1, Terminal_C1, Terminal_In1, Terminal_In2, Terminal_In3, Terminal_PowerIn1 |
| 7 | 5016 | custom:KEYSTONE_5016 | 1-, 1+, 2-, 2+, 3V3, BAT, GND |
| 5 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1, C5, C6, C7, C8 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric | R2, R5, R6, R7 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C2, C9 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 2 | 22 | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 2 | 36pF | Capacitor_SMD:C_0805_2012Metric | C10, C11 |
| 2 | FSM1LPATR | custom:SW_1-1437565-8 | S1, S2 |
| 1 | 12401598E4_2A | custom:AMPHENOL_USBC | J3 |
| 1 | AP7363-33D-13 | Package_TO_SOT_SMD:TO-252-2 | U3 |
| 1 | ATmega32U4-M | Package_DFN_QFN:QFN-44-1EP_7x7mm_P0.5mm_EP5.2x5.2mm | U1 |
| 1 | AVR-ISP-6 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | Baja | custom:bajabig | Image1 |
| 1 | C5S-24.000-20-3030-X-R | custom:XTAL_C5S-24.000-20-3030-X-R | Y1 |
| 1 | DRV8904QPWPRQ1 | custom:HTSSOP24_PWP_TEX | U2 |

Valar-Systems/valar-motion
The easiest, fastest, cheapest, and safest way to spin a stepper motor wirelessly. Valar Motion is a family of tiny Wi-Fi stepper controllers built around a Trinamic TMC2209 driver — precisely control a motor's…

Valar-Systems/VAL3100
The VAL3100 is now part of the Valar Motion mono-repo, alongside the VAL3000 and VAL3101 controllers:

Corteil/EMF_space_unicorn
code and PCB design files for my Space Unicorn hextension for EMF 2026

jordanabinader/In_Plane_Thermal_Conductivity
Complete integration of server, db, web app, controls, and computations components for in-plane thermal conductivity.

LeanderU/KnockBox
Focus: PCB Design of a interactive device using SAMD51 chip

ZigZagJoe/30Video-Support
Contains updated firmware and support utilities for the 30Video series of video cards.

SonOfCheevap/PierogiNixie-PSU
A simple 12v to 150v-250v DC-DC Power supply for use with nixie tubes.

It measures 53 × 40.9 mm and has 2 copper layers, 1.6 mm thick.
42 parts, built around the ATMEGA32U4-MU, DRV8904QPWPRQ1, OSTVN02A150 and FSM1LPATR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ACherniske/E-C-Subteam-Bucknell-Baja repository on GitHub, at the commit this page was made from: the board is Projects/Differential/Diff2rev4/Diff2rev4.kicad_pcb and its schematic Projects/Differential/Diff2rev4/Diff2rev4.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).