Skip to the content
2 layers26.4 × 107.9 mmLightbox pcb, the printed circuit board in 3D

Augmentative and alternative communications device design files based on inexpensive and open source technologies.

Size
26.4 × 107.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
23
Nets
22
Pads
66
Tracks, vias
97, 3
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
19 Nov 2019
Updated
17 Dec 2021

Overview

Lightbox pcb is an open-source printed circuit board by Accessible-AAC, from the Accessible-AAC/AAC-Devices repository on GitHub. It is a 2-layer board of 26.4 × 107.9 mm with 23 parts on 22 nets, routed with 97 tracks and 3 vias.

It is built around the PJ-320AS镀银环保 and PRTR5V0U2X. Its parts include 10 resistors, 8 diodes, 1 IC and 1 connector.

Main components

2

README

README.md

AAC-Devices

Augmentative and alternative communications device design files based on inexpensive and open source technologies.

Printed circuit boards were designed using KiCAD (https://www.kicad.org/)

Enclosures were designed using OpenSCAD version 2015.03-2 (https://www.openscad.org/).

Solutions are designed around commodity electronic devices that should be inexpensive and readily available on-line.

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Parts

23
QtyValueFootprintReferences
8220Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2, R3, R4, R5, R6, R7, R8
8LEDLED_THT:LED_D3.0mmD1, D2, D3, D4, D5, D6, D7, D8
210kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR9, R10
2val**freetronics_footprints:1pin_prototyping1pin_prototyping, 1pin_prototyping
1MCP23008-E_Pdigikey-footprints:DIP-18_W7.62mmU1
1PJ320Adbh_kicad_library:PJ-320AJ1
1PRTR5V0U2XPackage_TO_SOT_SMD:SOT-143ESD1

More from Accessible-AAC/AAC-Devices

9
  • 2 layers71.9 × 58.4 mmAtmega32u4 hub pcb 1 3, the printed circuit board in 3D

    Atmega32u4 hub pcb 1 3

    Accessible-AAC/AAC-Devices

    Augmentative and alternative communications device design files based on inexpensive and open source technologies.

    65 parts3
  • 2 layers19.1 × 22.9 mmArcade joystick pcb, the printed circuit board in 3D

    Arcade joystick pcb

    Accessible-AAC/AAC-Devices

    Augmentative and alternative communications device design files based on inexpensive and open source technologies.

    6 parts3
  • 2 layers43.9 × 13 mmDual touch sensor trrs pcb, the printed circuit board in 3D

    Dual touch sensor trrs pcb

    Accessible-AAC/AAC-Devices

    Augmentative and alternative communications device design files based on inexpensive and open source technologies.

    3 parts3
  • 2 layers25.1 × 23.4 mmSwitch adaptor, the printed circuit board in 3D

    Switch adaptor

    Accessible-AAC/AAC-Devices

    Augmentative and alternative communications device design files based on inexpensive and open source technologies.

    3 parts3
  • 2 layers13.2 × 12.4 mmGy-521 trrs pcb, the printed circuit board in 3D

    Gy-521 trrs pcb

    Accessible-AAC/AAC-Devices

    Augmentative and alternative communications device design files based on inexpensive and open source technologies.

    2 parts3
  • 2 layers24.4 × 11.7 mmHw 504 joystick trrs pcb, the printed circuit board in 3D

    Hw 504 joystick trrs pcb

    Accessible-AAC/AAC-Devices

    Augmentative and alternative communications device design files based on inexpensive and open source technologies.

    2 parts3
  • 2 layers9.7 × 16.8 mmRed touch sensor trrs pcb, the printed circuit board in 3D

    Red touch sensor trrs pcb

    Accessible-AAC/AAC-Devices

    Augmentative and alternative communications device design files based on inexpensive and open source technologies.

    2 parts3
  • 2 layers18.8 × 34 mmTactile switch pcb v2, the printed circuit board in 3D

    Tactile switch pcb v2

    Accessible-AAC/AAC-Devices

    Augmentative and alternative communications device design files based on inexpensive and open source technologies.

    2 parts3
  • 2 layers18.3 × 11.7 mmTouch sensor trrs pcb, the printed circuit board in 3D

    Touch sensor trrs pcb

    Accessible-AAC/AAC-Devices

    Augmentative and alternative communications device design files based on inexpensive and open source technologies.

    2 parts3

Similar boards

  • 2 layers95.5 × 35 mmNubkey module tester, the printed circuit board in 3D

    Nubkey module tester

    palette-system/nubkey_module

    This is a module that allows Nubkey using a magnetic switch to be used in the same communication as PIM447.

    11 parts5MIT
  • 2 layers274 × 84 mmAz esportho 2, the printed circuit board in 3D

    Az esportho 2

    palette-system/az-esportho

    126 parts2MIT
  • 2 layers58 × 103 mmAz emugotch, the printed circuit board in 3D

    Az emugotch

    palette-system/az-m5ortho

    az-m5ortho

    33 parts20
  • 2 layers181 × 97 mmOpenDeck r3.1.2, the printed circuit board in 3D

    OpenDeck r3.1.2

    shanteacontrols/OpenDeck

    A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

    262 parts960Apache-2.0
  • 4 layers68.6 × 53.3 mmDsi shield, the printed circuit board in 3D

    Dsi shield

    twlostow/dsi-shield

    Arduino MIPI DSI Shield

    224 parts524LGPL-3.0
  • 4 layers59 × 33.8 mmCYM1A113, the printed circuit board in 3D

    CYM1A113

    trezor/trezor-hardware

    :wrench: Hardware design of Trezor

    133 parts228
  • 4 layers137 × 86 mmCIAA K60, the printed circuit board in 3D

    CIAA K60

    ciaa/Hardware

    Hardware de la CIAA

    467 parts216
  • 4 layers230.7 × 97.8 mmTako, the printed circuit board in 3D

    Tako

    ssbb/tako

    34 key EC split keyboard

    146 parts200MIT

Questions

How big is the Lightbox pcb PCB?

It measures 26.4 × 107.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Lightbox pcb use?

23 parts, built around the PJ-320AS镀银环保 and PRTR5V0U2X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Lightbox pcb KiCad files?

From the Accessible-AAC/AAC-Devices repository on GitHub, at the commit this page was made from: the board is peripherals/lightbox/lightbox_pcb_v3/lightbox_pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Lightbox pcb design in my own project?

Its repository states no licence, so its author keeps all rights: ask Accessible-AAC before reusing the design.