2 layers88.9 × 50.8 mm
DogeKey2
acamilo/pcb-artwork-project
Collection of graphical PCBs containing memes, logos of youtube channels i watch, among other things.
23 parts1
2 layers90.4 × 106 mm
Skullkey
acamilo/pcb-artwork-project1Collection of graphical PCBs containing memes, logos of youtube channels i watch, among other things.
- Size
- 90.4 × 106 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 35
- Pads
- 79
- Tracks, vias
- 146, 20
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 4 Oct 2021
- Updated
- 4 Oct 2021
Overview
Skullkey is an open-source printed circuit board by acamilo, from the acamilo/pcb-artwork-project repository on GitHub. It is a 2-layer board of 90.4 × 106 mm with 20 parts on 35 nets, routed with 146 tracks and 20 vias.
It is built around the ATSAMD21E18A-MF, AP2112K-3.3 and HSMC-C265. Its parts include 5 capacitors, 3 resistors, 3 ICs, 1 connector and 1 switch. It belongs with the SAM D and SAM boards of this library.
Main components
3
ATSAMD21E18A-MF
VFQFN-32-EP(5x5)-40℃~+125℃ 1.62V~3.6V 256KB 26 32 Bit 32KB 48MHz ARM Cortex-M0+ Built-in FLASH VFQFN-32-EP(5x5) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorised
HSMC-C265
1305-40℃~+85℃ 1.9V 130° 20mA 60mW 626nm 637nm 75mcd Discrete Diode Red White Lens 1305 LED Indication - Discrete ROHSBroadcom LimitedLED Indication - Discrete
README
README.mdpcb-artwork-project
These logos belong to thier owners and are not affilited with me in any way, I just thought they'd look cool on a PCB.
[blocked]
[blocked]
[blocked]
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP3, TP4, TP5 |
| 4 | 10uF | Resistor_SMD:R_0603_1608Metric | C1, C2, C6, C7 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R1, R5 |
| 2 | Val** | artwork:skull-kicad | Ref**, Ref** |
| 1 | 1uF | Resistor_SMD:R_0603_1608Metric | C3 |
| 1 | 330 | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | ATSAMD21E18A-M | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.6x3.6mm | U1 |
| 1 | HSMC-C265 | HSMC-C265:HSMC-C265 | U5 |
| 1 | SW_SPST | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
| 1 | USB_B | usb-pcb:usb-pcb | J1 |
Questions
How big is the Skullkey PCB?
It measures 90.4 × 106 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Skullkey use?
20 parts, built around the ATSAMD21E18A-MF, AP2112K-3.3 and HSMC-C265. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Skullkey KiCad files?
From the acamilo/pcb-artwork-project repository on GitHub, at the commit this page was made from: the board is skullkey/pcb/pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Skullkey design in my own project?
Its repository states no licence, so its author keeps all rights: ask acamilo before reusing the design.
More from acamilo/pcb-artwork-project
4- 2 layers88.9 × 50.8 mm
Dogekey
acamilo/pcb-artwork-project
Collection of graphical PCBs containing memes, logos of youtube channels i watch, among other things.
22 parts1 - 2 layers52.7 × 105.2 mm
CryptoRosette
acamilo/pcb-artwork-project
Collection of graphical PCBs containing memes, logos of youtube channels i watch, among other things.
21 parts1 - 2 layers33.6 × 46.4 mm
Lttrgb
acamilo/pcb-artwork-project
Collection of graphical PCBs containing memes, logos of youtube channels i watch, among other things.
20 parts1
Similar boards
- 2 layers26 × 30 mm
Microcontroller
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
34 parts1.1kCC-BY-4.0 - 4 layers50 × 80 mm
SensBoard
Hazel-H-Chen/PocketSens
Microcontroller based sensor suite for portable environmental measurements.
62 parts1MIT - 2 layers53.2 × 24.8 mm
- 2 layers36 × 20 mm
- 2 layers25 × 25 mm
SmallEncoder
DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…
17 parts498MIT - 4 layers70 × 72 mm
- 4 layers60.8 × 61.3 mm
- 2 layers100 × 57 mm
