2 layers26.5 × 34.4 mm
PicoLoaderNSB
makeo/PicoLoader
A cheap and easy to install modchip for the Nintendo GameCube!
45 parts320GPL-2.0
2 layers32.6 × 25.4 mm
Sensus breakout
acalinp/sensus-breakoutBreakout board for the new Sensus Smart Probe
- Size
- 32.6 × 25.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 63
- Pads
- 149
- Tracks, vias
- 268, 64
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 20 Jul 2023
- Updated
- 20 Aug 2023
Overview
Sensus breakout is an open-source printed circuit board by acalinp, from the acalinp/sensus-breakout repository on GitHub. It is a 2-layer board of 32.6 × 25.4 mm with 28 parts on 63 nets, routed with 268 tracks and 64 vias.
It is built around the RP2040, W25Q128JVSIQ and XC6206P332MR. Its parts include 12 capacitors, 7 resistors, 4 connectors, 3 ICs and 1 diode. It belongs with the interfaces and adapters boards and the RP2040 boards of this library.
Main components
3
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
XC6206P332MR
SOT-23-40℃~+85℃@(Ta) 1 1uA 200mA 3.3V 6V Fixed Over Current Protection Positive SOT-23-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTorex SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100n | Capacitor_SMD:C_0402_1005Metric | C3, C6, C7, C8, C9, C12 |
| 2 | 100 | Resistor_SMD:R_0402_1005Metric | R5, R6 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R3, R7 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C10, C11 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 30p | Capacitor_SMD:C_0402_1005Metric | C4, C5 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J3 |
| 1 | LED_Small | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U2 |
| 1 | USB_BOOT | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10118193-0001LF_Horizontal | J5 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U3 |
| 1 | XC6206P332MR | Package_TO_SOT_SMD:SOT-23 | U1 |
| 1 | v1 connector | Connector_FFC-FPC:Hirose_FH12-10S-0.5SH_1x10-1MP_P0.50mm_Horizontal | J1 |
Questions
How big is the Sensus breakout PCB?
It measures 32.6 × 25.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sensus breakout use?
28 parts, built around the RP2040, W25Q128JVSIQ and XC6206P332MR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sensus breakout KiCad files?
From the acalinp/sensus-breakout repository on GitHub, at the commit this page was made from: the board is sensus-breakout.kicad_pcb and its schematic sensus-breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sensus breakout design in my own project?
Its repository states no licence, so its author keeps all rights: ask acalinp before reusing the design.
Similar boards
- 2 layers35.9 × 62.7 mm
Rp2040-memcard
sd2psx/pcb
The PCB must be produced in 0.8mm thickness. Production files are provided under the "Releases" tab. These do not include the through-hole OLED module.
60 parts241 - 4 layers51.4 × 60.6 mm
Gb rp2040 cart
deltabeard/DBGC
A Game Boy cartridge using the Raspberry Pi RP2040 with RTC and MBC support.
67 parts57 - 2 layers25 × 25 mm
Rp2040-bento
ergomechstore/rp2040-bento
The RP2040-bento is a breakout board for the RP2040 MCU.
32 parts38MIT - 2 layers76 × 63.5 mm
PicoTracker
xiphonics/picoTracker-pcb
Buy the official kit at xiphonics store # Trademark Notice
98 parts36CC0-1.0 - 2 layers82.3 × 35.5 mm
- 2 layers346.1 × 93.7 mm
Sifrl main pcb
ramonimbao/SpaceInvadersFRL
An F-rowless TKL keyboard case, plate, and PCB that uses the HiTek Series 725 switches.
177 parts15 - 2 layers194.3 × 79 mm
